Itunes 10.5 on windows.
I have tried for 2 days to download itunes 10.5.
I have read the other help messages and tried to repair apple software update. I got an error message on repair and could not uninstall it either.
I am stuck! Any other ideas
Thanks
I have read the other help messages and tried to repair apple software update. I got an error message on repair and could not uninstall it either.
What do the Apple Software Update error messages say, sam? (Precise text, please.)
Similar Messages
-
My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer
Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adamitunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam -
How can i use my apple ID with the itune store over my windows laptop
how can i use my apple ID with the itune store over my windows laptop
If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price. -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
Itunes wont open on Windows 7. Have tried EVERYTHING?
My name is Hunter and i have tryed everything to open up my Itunes.
I have Windows 7 on a HP Probook 4425s and i have been all over the web looking for help.
I have tried uninstalling and repairing multiple times and still nothing.
Any help would be greatly appriciated.
Thank youI also have the same problem. I have uninstalled Itunes and reinstalled but it still will not open. The blue circle (loading sign), appears for about one second but nothing happens. Any help will be appreciated. Cheers, Tim.
-
Hi, I have an iphone 4 with my itunes library on a Windows XP computer. My spouse (who has now passed away) had an itouch with an itunes library on an IMac. here is the problem, I bought an new iphone 6 and wanted to sync with my windows xp library and of course my itunes version is out of date and I need to update it...well I try and update the version and it will not update the Itunes library and when I researched it I would have to upgrade from XP to Windows 7...r they kidding me...first of all my computer is old and a pain in the *** but I have my itunes library on it. Sp to get my phone working I sync'd it on the IMac and my spouses Itunes library has been sync'd to my iphone and I don't know how to get my library on it...After thinking about it I want to combine the libraries after all there are some purchases on each one.
I have done some research and you have to buy a 3rd party piece of software...this is not the way I want to go...I do not think i should have to buy one and also when I do a goole search there are a ton of them out there and I am sorry i do not trust the comments as some of them do identify that they will get a kick back.
Can someone help, i should be able to export my itunes library from my iphone 4 to the itunes library by appending/importing it...it is not rocked science on what I want to do and I cannot find out any process...
Can someone help ?Create a new user account on the computer that he can log in to.
-
Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3
Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2 -
Hi, I'm an ipod newbie, and unsure of what product i have-i believe it's an ipod nano, but can't seem to find any info on itunes that will identify my product.
how do i move ipod nano music to a new Windows 7 computer? My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod. I can't seem to de-authorize the old computer (it's been recycled). Does this mean I have to start all over and read in my CD's into itunes? seems very inflexible/inelegant...
thanks for your help, sorry if this question has already been answered before!Is there no ANSWER TO THIS PROBLEM?
-
Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??
I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.
-
ITunes 12 incompatible with Windows Vista Data Execution Prevention FIX
I have been getting a "Vista Data
Execution Prevention" error message whenever I closed iTunes for months
now, and after reading through a few forums, I have found a solution
that works. It only takes two minutes. Long story short:
1) Start iTunes
2) Open the Windows Task Manager
3) Go to the "Proccess" Tab
4) Find "AppleMobileDeviceHelper.exe *32" and right click on it.
5) Select "Properties" from the drop down menu
6) Go to the "Compatibility" Tab
7) Check the Box next to "Run this program in compatibility mode for:"
8) If "Windows XP (Service Pack 2)" is not in the field below, click on the down arrow and select said option.
9) Click on "OK" to close the window.
10) Close the iTunes application
11) Reopen the iTunes application
12) Close the iTunes application again.
At this point you should not see anymore "Vista Data Execution Prevention" error messages when you close iTunes!
P.S.
If you want to go back and de-select running
"AppleMobileDeviceHelper.exe *32" in Windows XP Compatibility mode, you
can. Though this part is totally optional. The next time you close
iTunes, you will get one last "Vista Data Execution Prevention" error
message, but don't worry, it will be the last one. Try opening iTunes
again and then closing it, and TaDa, no more error messages. I don't
know why running AppleMobileDeviceHelper.exe *32 in compatibility mode
JUST ONCE solves the problem, but it worked for me.
Happy new year \o/Welcome tocguy. If I may ask you a question: How much memory does your Vista x64 PC have? I have 3 GB, which is the maximum that 32-bit Vista can recognize, but I seem to recall that 64-bit Vista can utilize much more than that, and wonder if that might be why 64-bit users are scarce in the 11.2 thread.
I have now also done a truly clean reinstall, deleting Apple folders in ProgramData and each user account's AppData folder, and even the iTunes folders in each user's Music folder. Of course I moved my iTunes Media folder to a safe location first, and one iTunes Library backup file suitable for version 11.1.5. I also cleaned the registry. The most I can say is that I sometimes don't get a BEX upon closing iTunes now, but usually I do. I deselected one default setting during installation, "Use iTunes as the default player for audio files." (If an audio file can be opened by Media Player 11, why would I want to open it in a program that gives me a BEX nearly every time I use it? Too bad my AAC files purchased at iTunes Store can't be opened by WMP, but I certainly won't be buying any more of those now.) My advice to other Vista users: Don't waste your time reinstalling, it won't solve the DEP problem.
Ran the Program Compatibility Wizard to run iTunes in XP SP2 compatibility mode, but abandoned that idea after the first BEX.
Thought I was onto something when I tried the registry fix at http://blogs.technet.com/b/askperf/archive/2008/06/17/to-dep-or-not-to-dep.aspx. Johnny DEP thought he was so slick when he saw iTunes listed as an exception in his DEP tab, but there was one minor problem (yes I did reboot):
Oh well, it's probably a bad idea to allow buffer overruns anyway. The fact that this didn't work causes me to think that Enhanced Mitigation Experience Toolkit or Application Compatibility Toolkit would also be a waste of time. Vista users who wish to avoid BEX errors can either downgrade their iTunes (free) or upgrade their Windows (not free). -
After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.
Click here and follow the instructions.
(98815) -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Hi, I downloaded an itunes update to my windows vista pc a couple of days ago.
Now I cannot open itunes because I am told that MSVCR80.dll can not be found.
What is my best course of action please?Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
Sharing iTunes library across 2 Windows user IDs
My Windows XP computer is set up with 2 user accounts. iTunes is installed and all of my music is stored in my Shared Music folder (this folder is in Shared Documents, which is accessible from each user ID).
I want to be able to use iTunes from either Windows user ID. The problem is that iTunes creates and maintains 2 separate iTunes Music Library.xml files. When I'm logged on (user #1), iTunes uses the xml file in my My Documents folder. When my spouse is logged on (user #2), iTunes uses the xml file in her My Documents folder.
This is problematic. If I add a new song to iTunes from my Windows ID (and the song file is placed in the Shared Music folder), it is added to my library and xml file. If my spouse logs on and launches iTunes, the song is NOT in her iTunes library. She has to manually add the file from the iTunes Add File to Library command.
I'd like iTunes to use a single library that both Windows user IDs can use and maintain. I don't want to have to manually try to keep these in sync.
I can't find any setting in iTunes for this, and the user guide doesn't even mention this topic. Any help is appreciated!!!TheMint,
I think it works like this:
The setting you describe is where iTunes will store the music files themselves (.aac or .mp3, etc.) However, iTunes creates an index of all of your music, and it uses that index to display all of your music in iTunes. The index file is called iTunes Library.xml
The index is stored in the My Documents\My Music folder of the user ID you log in as. Apparently, you cannot tell iTunes to store this in a different location.
So if you create an iTunes library under one Windows user ID, the index is created in that user ID's My Documents\My Music folder. If you then log in as another Windows user ID, iTunes does not see the index that was created by the first Windows user. Thus you do not see any of the music listed in iTunes.
Maybe you are looking for
-
When i try to add a class to the active page to have it distinguished when a visitor is on, in the class section it only has other options and not one for "active"
-
Uploading for Transaction IA05
Hi, Does anybody have any idea what are the ways to upload data for transaction IA05 - General Task List. I understand there are LSMW direct inputs 470 and 490, but both of them lead to the same transaction IA01 i.e Equipment Task List. I have create
-
Setting up a WD Passport external HD
This may be intuitive for many of you but not for me. I just bought a 2TB Western Digital external hard drive. I've plugged it into the computer and and transferred the utility and security files. I've opened the WD Drive Utilities icon and run th
-
PSD & Tiff not displaying correctly
Hello all. Hope someone can help I have been working on a menu background containing text and icons which was first placed in DVDSP as an overlay menu with the grayscale version as a second layer and using the controls in the colours Tab in the Menu
-
Can AEBS used as a 4 port switch too?
Or is the WAN port dedicated, meaning I can't use it as a LAN port?