Itunes 10.5 update installation problem

I was trying to update my itunes 10.5,after downloading it from apple store successfully,an error occured during the installation stage. It shows 'There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
What should i do? I must remove itunes before installing 10.5?

Having lots of issues,.. and rather disconcerted by apple today.
1.) Downloading 10.5 itunes succeeded but then would not install on a brand new dell... apparently something is missing on my computer (but that is all the information your software gave me so i am having to uninstall itunes and backup my library... we all know what happens when you dont!)
2.) Brand new 4.5 Iphone with cute minisim did not transfer my contacts, and wont find signal... I guess the sim transfer isnt fool proof.. to be honest, if I can tell the phone to call jimbob in New York, why isnt there a voice command on start up or something automated to make sure the sims transfer from old to new.
Hastle time and money all for the Apple religion. Great when it works, but why am I left doing this chore.. I kind of miss the good old days of 3G when it did what it said it would.

Similar Messages

  • Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6

    Hello,
    After the installation of several updates I find several errors in the error log:
    " Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6"
    I use a Mac Book Pro with Retina and MAC OSX 10.7.5.
    What is the problem and how can I solve it?
    Best regards
    Frank

    Follow the instruction given at the following link:
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • ITunes update installation problems

    I just tried to install the latest update to iTunes, and I've encountered several problems.  One error message says "Apple Mobile Device failed to start".  Another says "MSVCR80.dll missing".  Anyone know how to resolve these problems?  I uninstalled iTunes, restarted the computer, downloaded the file, and then ran it.  It failed to install, and gave me these error messages.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ITunes 11.1.4 installation problem

    Along with a lot of other users I had problems yesterday with the installation of update 11.1.4 on my windows7 64bit computer. After a lot of frustration getting nowhere I resorted to 'phoning Apple Support. Despite all the postings on discussion groups the guy there told me I was the first to report the problem and he had no knowledge of it. and they would 'phone me back this morning at 09.45 gmt today.
    Following yesterday's call I decided to do a system restore to iTunes 11.1.3. iTunes didn't work immediately but only after an iTunes repair in the uninstall software screen.
    The call came from Apple this morning and even now the Apple girl told me that she had no knowledge and she did not have aproblem with 11.1.4. I find this totally amazing and I think they need to get their act together. Why did they not pull the update when there were so many problems? Perhaps they don't read information posted in discussion groups.
    The Apple assistant seemed surprised when I told her I would be sticking with11.1.3!!

    It is a big company. I'm not entirely surprised if it takes time for information about a new and evolving situation to be understood and updated advice to be delievered to front-line support.
    For anyone who has had trouble installing iTunes 11.1.4.62 and wants to get iTunes functional again, read on...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8. Some users may need to follow all the steps in the appropriate support document which includes some additional manual file and folder deletions not mentioned above.
    tt2

  • ITunes 10.4 Update: Bonjour Problems

    (Just as an aside, I have never experienced problems of this manner, and installation of new updates was always simple & easy)
    Whenever I attempt to update iTunes+Quicktime, I seem to encounter the same baffling problem: I am not able to provide a route to the Bonjour.msi file.
    I have found the Bonjour.msi file, and have offered a correct route for it to the Apple Update Installer. It just rejects it again and again, either saying that the 'file could not be found' (even though the file is obviously there), or that the file ' is not a correct destination' to install Bonjour to. I feel that I have to gone to my limit in trying to find out what is wrong here, and subsequently am asking the community for assistance. With the iOS 5 update on the horizon, I need iTunes to be ready to accept it.
    Any assistance is appreciated. 

    Similar issue on Dell latitude, HP desktop works!
    WinXP

  • ITunes 10 later version installation problem

    I am using Windows 7 home edition 64 bit.
    I cannot use my iTune 10 with my iPhone 3GS and I cannot install iTune 10 newer later versions.
    iTune version 10 cannot be used/synchronised - no file transfer/updates.
    Says "Cannot uninstall Bonjour" when I tried to update iTunes later version.
    Any known issues and how to go about it.
    Help appreciated.

    But when it comes to start update/installation - it continues to prompt to locate the quicktime.msi and itune.msi files and when I did - the installation refuses to continue - and continue to prompt to locate the installation files - .msi files.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Next, select any QuickTime entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Itunes 10.6.1 installation problem

    I have problem to update itunes 10.6.1 and it said :
    The update "iTunes" can't be installed
    An unexpected error pccurred.
    can someone help me?
    Thanks in advance.

    SOLVED. Must have been a installation error. Reinstalled the update in safe mode and now I'm good.

  • Itunes/Quicktime new update authorization problems plz help

    Ive used Itunes and Quicktime for years with no problems. So a week ago I download the newest Itunes version, and from then on I couldnt open it, I attempted the quicktime update but this message would always appear. "The installer has insufficient privileges to access directory C:/ProgramFiles/Quicktime/PictureViewer.Resources/da.lproj. Installation cannot continue. Log on as admin."
    I have checked other posts out and I have tried completely reinstalling itunes and quicktime, then reinstalling together and seperatly, everytime the exact same message pops up. I have tried right clicking on the install links as "run as admin" Ive tried all I know of, I know im admin and the only account on computer.. Ive tried opening the actual files and changing them as the they are stuck as "read only" files, but again you cannot change them. Only thing ive thought of that havent tried is deleting all those quicktime folders in program files, which I dont understand why they are even there still since at the moment quicktime is not even installed?
    Would greatly appreciate any help or pointing me in the right direction! Cant listen to music and I even just got a new 16g ipod that I cant even use yet either :X thanks for your time

    "The installer has insufficient privileges to access directory C:/ProgramFiles/Quicktime/PictureViewer.Resources/da.lproj. Installation cannot continue. Log on as admin."
    That one is consistent with disk/file damage, Boarder.
    Try running a disk check over your C Drive as per the following document. (Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.)
    [Check your hard disk for errors|http://windows.microsoft.com/en-us/windows-vista/Check-your-hard-disk-fo r-errors]
    Does the disk check find/repair any errors? If so, try another QuickTime install. Does it go through properly this time? If it does go through properly, does your iTunes start to launch again?

  • Photo RAW update installation problems for Photoshop CS5

    I have Photoshop CS5. I was trying to import some photos taken with my Nikon D3200, but it said that it didn't recognize the camera. I then tried to d/l the update, but after almost finishing the installation, it would say that it couldn't install all the parts, and try again later. I did but with no luck. Anyone have this problem?

    Ok, since you have 10.6.8, v 8.3 dng converter is the latest supported for that OS.
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
    How to use it:  Camera Raw: How to use Adobe DNG Converter - YouTube
    Here's direct download of ACR 6.7 if you have not tried it Adobe - Photoshop : For Macintosh : Camera Raw 6.7 Update
    So I hope that helps.
    Gene

  • Update installation Problems CS4

    For the past week I've battled with my PC trying to install the 11 updates I downloaded from Adobe.  I have a PC with Win 7 OS, 12GB Ram  that runs a i7 CPU 920 by Intel using a high speed ISP. My Graphics card is ATI Radeon HD 4800 series with 512 MB.
    I've downloaded.... re-downloaded.. etc and still when I try to install the updates I get the following error box message.. give or add a word or two.
              Installation Incomplete
                 The installation process has encountered a problem.
                  Please choose from the following options.
                  1. Cancel the current update & continue to install the remaining updates
                  2. Stop installing and continue later
    I used option 1... but after each of the 11 updates did its thing I'd get the error box again.
    I need HELP!!
    BTW...your opinions are appreciated for the following question
          Is the ATI Radeon HD 4800 good enough for this program or is it just enough to get by?
    Thanks
        H

    Hi H,
    I would advise you not to download the updates from the 'Help - Updates' procedure in CS or Bridge.
    Go directly to Adobe, download the updates to your chosen place on your machine, and for each update right click on the downloaded set-up file, and select 'Run as administrator".
    Also make sure that no CS or Bridge processes are running when you do the installation, check with the Task Manager.
    I hope that helps,
    Roger

  • HT4592 Airport and Java update installation problem

    I tried to install the recommended updates, but the Airport 5.5.3 and Java for Mac OSX 10.5 Update 10 1.0 wouldn't install because they couldn't be verified.  What does this mean?  I don't understand why Apple would need to verify them, or be unable to verify them, if they come from Apple.  Also, I've been having trouble with video on my MacBook Pro and am wondering if this problem could be related to the installation issue? 

    I just tried the updates again and these were the error messages I received:
    For Java: The Installer could not validate the contents of the ‘JavaForMacOSX10.5Update10’ package. Contact the software manufacturer for assistance.
    And for Airport: The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.

  • ITunes 5.0 Update/Connection problems

    Has anyone heard if Apple plans to do anything to correct the issues folks are having. My brand new replacement Ipod is not being recognized by my computer, or Itunes, and I have gotten a message saying my Ipod is too old, I've gotten messages saying connect my Ipod when it's connected. What are you guys going to do to remedy this or do you give a dang now that the new video Ipod is out? Your silence seems like indifference. I keep reading the same issues over and over again, and no one addresses it. It seems that the only thing that gets your attention is class action lawsuits. Please..someone do something..let us know if you are in the process of correcting the problems. Some of us have music we've purchased that we can't use. Are refunds on the horizon?

    I haven't heard what they may do but you should send them feedback. If they get enough complaints maybe they will fix the problems!
    http://www.apple.com/feedback/ipod.html
    http://www.apple.com/feedback/itunes.html

  • Solution for the Camera Raw 8.2 update installation problem

    Hi.
    Adobe Camera Raw 8.2 for CC & CS6 was released two months ago.
    http://blogs.adobe.com/lightroomjournal/2013/09/camera-raw-8-2-and-dng-converter-8-2-now-a vailable.html
    But many people got problem in updating Camera Raw 8.2.
    I tried to inspect the update application and simply found a workaround.
    Adobe Camera Raw 8.2 for CC & CS6
    Unzip and replace "Camera Raw.8bi" in the file formats plugin folder.
    For Windows 7 ~ 8.1, the path is "C:\Program Files\Common Files\Adobe\Plug-Ins" => "CC\File Formats" or "CS6\File Formats"
    CC & CS6 x64 .7z (13,088KB) - https://drive.google.com/file/d/0BwCp0TDkNkHYVUZzSlpKenNSajQ
    CC & CS6 x64 zip (14,962KB) - https://drive.google.com/file/d/0BwCp0TDkNkHYUW9zeVNLMXJIRFU
    CC & CS6 x86 .7z (12,633KB) - https://drive.google.com/file/d/0BwCp0TDkNkHYNU5GTEhZbmF5eGc
    CC & CS6 x86 zip (14,254KB) - https://drive.google.com/file/d/0BwCp0TDkNkHYeE1PRThIejQyTDg
    * Extracted from http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.2.67/setup.zip
    Adobe Camera Raw 8.2 Camera & Lens Profiles for CC
    Unzip files in CameraRaw application folder.
    For Windows 7 ~ 8.1, the path is "C:\ProgramData\Adobe\CameraRaw".
    .7z (12,387KB) - https://drive.google.com/file/d/0BwCp0TDkNkHYdWFyZXRwNG1XeUk
    zip (17,830KB) - https://drive.google.com/file/d/0BwCp0TDkNkHYdl82bzluSnNCSU0
    * Extracted from http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.2.67/setup.zip
    Hope this is helpful.
    Thanks.
    New Camera Support in Camera Raw 8.2
    Canon EOS 70D
    Canon PowerShot G16
    Canon PowerShot S120
    Casio Exilim EX-ZR800
    Fujifilm FinePix HS22EXR
    Fujifilm FinePix HS35EXR
    Fujifilm FinePix S205EXR
    Fujifilm X-M1
    Leica C (Typ 112)
    Olympus E-M1
    Panasonic Lumix DMC-GX7
    Panasonic Lumix DMC-FZ70
    Panasonic Lumix DMC-FZ72
    Pentax Q7
    Pentax K-50
    Pentax K-500
    Sony DSC-RX100 II
    Sony A3000 (ILCE-3000)
    Sony NEX-5T
    New Lens Profile Support in Camera Raw 8.2
    Sony E 35mm F1.8 OSS
    Hasselblad LF16mm F2.8
    Hasselblad LF18-55mm F3.5-5.6 OSS
    Hasselblad LF18-200mm F3.5-6.3 OSS
    GoPro Hero 3 Black Edition
    GoPro Hero 3 Silver Edition
    GoPro Hero 3 White Edition
    Leica TRI-ELMAR-M 16-18-21 mm f/4 ASPH.
    SIGMA 18-35mm F1.8 DC HSM A013
    SIGMA 120-300mm F2.8 DG OS HSM S013
    SIGMA 30mm F1.4 DC HSM A013
    SIGMA 60mm F2.8 DN A013
    SIGMA 17-70mm F2.8-4 DC MACRO OS HSM C013
    SIGMA 35mm F1.4 DG HSM A012
    Nikon 1 NIKKOR 32mm f/1.2
    Sony DSC-RX1R

    Interesting.  How much is accomplished in the 8bi file without reference to camera-specific profiles?  There are some camera profiles that appear to have been added in acr updates.  for example there is a folder <Canon EOS 70D> in <C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera> (win 7) that contains five profiles (Faithful, Landscape, Neutral, Portrait and Standard).  Would acr be able to process 70D raw image files without these profile files?

  • 10.4.3 Update Installation Problem

    Tried to update from 10.4.2 to 10.4.3. It gets to 86% complete then stops..says installation not complete, try reinstall...same thing.
    I don't have the G5 connected to the internet, so I download the update on another computer and burn it to disk and transfer it to the G5. This has worked fine on other updates. Is there something about 10.4.3 that is different causing me to have to hook up to the internet or am I going completely in the wrong direction? Help!!!

    hi hagaphus - welcome to Apple Discussions!
    try this....
    - download the 10.4.8 Combo update from here
    - unplug any peripherals connected to your machine
    - reboot
    - quit any apps that start automatically upon login
    - use disk utility to repair permissions, and verify your hard drive.
    assuming all of that goes well, then try the 10.4.8 combo update.
    post back if you're still no go. good luck! cheers

  • Update \ Installation Problems

    Hi Expert,
    My home PC is run on Win XP and has a Firefox 3.6 browser along with other browsers. Whenever, an update is automatically downloaded, I get a message that 3.6.x is available but you're not authorised to install. I'm not connected to any network nor have any proxy settings. This happens even when I try to install the download afresh after logging in as administrator. My user rights and other restrictions remain as 'Not Configured'. This does not happens for other installations or browsers.
    Please help.
    K.Vee.Shanker.
    == This happened ==
    Every time Firefox opened
    == A month back

    Do you have multiple user account on your computer?

Maybe you are looking for