Itunes 10.5 - windows 7 64bit error

Hello,
I'm having a problem with Itunes 10.5. When I try to connect my iphone 3GS with itunes on my pc it says I installed the wrong version. I need the 64bit version and not the 32bit version.
But I just installed the 64bit version! I reïnstalled it 3 times, but nothing helps.
Please help me out.
Greetings,
TvV
Software = windows 7 64bit

When I connect my Iphone to my pc it says: could not synchronise with Itunes. And that I have to reïnstall Itunes and install the 64bit-version of Itunes.
That sounds like something has gone wrong with your Apple Mobile Device Support.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Similar Messages

During Itunes download for windows 7 64bit, error message says "Service Apple Mobile device" failed to start

During Itunes installation on my Windows 7 64 bit computer.. I get the following message which won't allow installation:
Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services.
This occurred after an itunes update to my computer that produced a corrupted msvcr80.dll file. So I deleted Itunes and reinstalled.

Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, I think you have to hold down the shift key when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes

Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

Itunes 10.5, windows 7 - 64bit, when I plug in itunes store, the screen remains blank. My AppleApplicationSupport are 2.1.5 - 2.0.1 - 1.4.1 - 1.1.0. Thanks

itunes 10.5, windows 7 - 64bit, when I plug in itunes store, the screen remains blank. My AppleApplicationSupport are 2.1.5 - 2.0.1 - 1.4.1 - 1.1.0. Help Me please. Thanks

tis works by mee
In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

I can't install itunes on my windows 8.. error appears says this : error microsoft. vc80.crt type="win32".version="8.0.50727.6195"

Why I cant Install itunes in my windows 8? error appears and it says:
error microsoft. vc80.crt type="win32".version="8.0.50727.6195"
please healp me

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Itunes + Windows Vista 64bits = ERROR

Hi!
I'm having problems to intall the *64bits version* of itunes.
During installation, Windows shows an error of incompatibility. How can I resolve this?
I need it to sync my itouch 3g.
Thanks!

Doublechecking something. If you download the 64-bit installer from the following location, do you still get the error message?
http://support.apple.com/kb/DL925

Not enough space to install itunes 11 on windows 7 64bit

I have itunes installed in my windows 7 64bit laptop.. I encountered errors when i was trying to update it with the auto updated.. so i decided to uninstall it.. Doing so i also had some problems so i decided to read some forums and eventually was able to get rid of itunes components using the microsoft fix it tool. I downloaded a new installer and everytime I run it, it gets interrupted by an error message saying check available space. I have 27GB free space on my hard drive. please help

Best solution to install Director 11/11.5 not to program files or program files(x86) in Vista/7/8 .
Create a folder c:\Director or c:\myprogs\director and install it there.
Then you will have not the security problems of system controled folders.
If you bought your Dir 11.5 in the online store, you should have a downloadlink in your orderhistory
Wolf

Unable to load itunes store in windows 7 64bit

Hi, installed 10.5... on Windows 7, 64bit machine and now cannot access Itunes Store. Appears to begin loading then stalls out. Have tried uninstalling and reinstalling. Tried running in compatibility mode. Daughters laptop (same operating system, different manufacturer) is having the same problem.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

ITunes 10.5 Windows installer package error?

i created windows installer package for iTunes 10.5. The The problem is when i am trying to install package it throws error like "failed to start applemobiledeviceservice". plz give me suggestion how to solve this error?

There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit***

I can't install Itunes because of Windows installer package error, please help!

I tried installing Itunes for a long time on my desktop, I'm running Vista. Everytime I try to install Itunes it runs for a bit, then gives me this message
" There is a problem with Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I went through many posts on how to solve this problem, I uninstalled and deleted all the files from this thread : http://support.apple.com/kb/HT1923
and tried to reinstall Itunes, didn't work, same error message.
After i tried to install Itunes in Clean boot still didn't work.
I also downloaded MicrosoftFixit.Program which apperantly fixed this problem for some people, not for me.
Then I extracted Itunes and tried to install all the components seperately, everything installed correctly, however when I tried to install Apple Software update
I got the same error message, i think it is the Apple software update that is causing this problem but I have no idea how to solve this problem.
How do I solve this, any thoughts or suggestions???

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
Now, uninstall Bonjour from Control Panel.

HT1923 Itunes reinstall on Windows Vista C++ error problem

I am trying to reinstall itunes and I keep getting MS Visual C++ error messages. I purchased one of the online tools that is supposed to correct these types of issues and I still have the same problem.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Itunes crash on windows 7 64bit

Hey, I'm running the 64bit version of itunes on windows 7. Everything seemed to be fine until the most recent update. Now whenever I try to access my music library or the itunes store, itunes crashes within seconds. Any idea what might be going on?

Try this fix it worked for me i am running Windows 7 and i have 10.5.3.3 working. https://discussions.apple.com/message/17374864#17374864

Cannot (re-)install itunes (64) for windows 8. get error 7 (Windows error 193)

I've used itunes for itunes for quite some time before making some hardware change (cpu and motherboard). The OS, like before, is Windows 8. But now each time that I try it seems to install up to and including the final "finish" in the process. After that it gives me the above msg suggestint that I rinstall. After a START of the computer there are complains about "apple" routines that cause problems.
I hope that there is an itunes user who n help.
Zeeghee (Siegfried Schulte, [email protected])

Hello Zeeghee,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Best of luck,
Mario

ITunes issues with Windows XP - crazy error message

I've been using iTunes with XP and have no issues for years now. Today, when I went to open iTunes I received a message that Windows was configuring iTunes for installation. I am unable to complete installation and I receive this message..."Error writing to file C\Program Files\iTunes\iTunesResources\pl.lproj\DevicePrefsPodcasts.nib\objects.xib.
Verify that you have access to that directory
Anybody have any idea what this is about, thanks.
When I cancel out I get a Problem with Shortcut box, Fatal error occurred during installation!

One more question though under Program Files-iTunes, I have multiple iTunes folders, labeled iTunes(2) and iTunes(4). Should I delete these or leave them alone?
I don't think they're any immediate cause for alarm if they're what I think they are ... have you done some system restores on that PC at some stage, Matt? If a system restore is done to a restore point "over the top" of an installation or upgrade of a program, sometimes the system restore will put program files dating back to the previous version back on the PC. By design, it doesn't want to overwirte existing files on the PC, so it renames the top-most folder containing the files it has put back "<Program name> (2)" or "<Program name> (3)" if there's already a "(2)" and so on.
(Because the installation database for the program doesn't realise that there are any such files in folders "<Program name> (2)" etc files on the PC, they generally don't get removed in the course of regular subsequent updates or uninstall/reinstalls of the program and they stay lurking around on the PC ... it's actually precisely the same phenomenon that we just exploited in order to convince the iTunes repair install to go through ...)

Itunes 9 for windows 7 64bit? doesn't work. anyone knows?

i tried to install both itunes 32bit and 64bit for windows 7 but it doesn't work anyone knows.... now i cant upload any music for my ipod nano 5th gen.... need your help...

i am having the same problem, it says that "this installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package."

Itunes 10.5 - windows 7 64bit error

Similar Messages

Maybe you are looking for