ITunes 10.5 working fine so far...

I just updated to iTunes 10.5 and everything seems normal; CPU usage is at around 67% which is where it normally is. Also, when I play music it seems to have improved because the older version used to freeze for a long time after each song, but now it's back to normal playback. I'll just say that iexplorer.exe has more CPU usage than iTunes.exe.
I was reading about all the problems ppl are having with iTunes 10.5 before I downloaded it but I have none of those problems.
Did ya'll restart your computer after the update? I did, maybe that has something to do with all the problems because I never had to restart the computer when updating on older version.
I'm running Windows Vista 32Bit...

try this for RST:http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=startdown&id=1644 100% trustable website double click the exe and extract the file, then browse in the new folder and run setup or install.exe

Similar Messages

  • ITunes WiFi Sync works fine for 4 devices, but not for my iPad2

    I'm using the latest version of iTunes (11.0.4)  on an iMac with the latest version of Mountain Lion (10.8.4) and multiple iOS devices listed below:
    iPad 1 (iOS 5.1.1)
    New iPad (iOS 6.1.3)
    iPhone 4S (iOS 6.1.3)
    iPhone 4S (iOS 6.1.3)
    iPad 2 (iOS 6.1.3)
    iTunes WiFi Sync works fine for all the devices but the iPad 2. They all show up in the "Devices" area of iTunes (though sometimes I need to power them down and restart them to get them to show up properly) and they all sync automatically when plugged into a power source.
    The iPad 2, however, behaves thusly:
    - Shows up under "Devices" in iTunes
    - Can be synced wirelessly IF initiated from the computer
    - Does NOT automatically sync when plugged in to a power source
    - CanNOT be synced wirelessly from the iPad itself, as under settings > general > itunes wifi sync, it shows the screen that says "to enable wifi syncing with itunes, connect to ituens on your computer using a cable..." as if I have this feature turned off in iTunes (which I do not). The "Sync Now" button is not displayed (not even a grayed out version).
    What I've tried:
    - Repeatedly powering down and restarting iTunes, the computer, the iPad, and the router in various orders and combinations
    - Repeatedly turning off and on the wifi sync feature via iTunes
    - Experimenting with the "Open iTunes when this iPad is connected" option as this actually fixed a similar issue on my iPad 1
    - Actually restoring the iPad to factory settings, then restoring from backup in case there was an issue with the iOS install
    Nothing has helped
    What I'm sure it's not:
    - A problem with the usual iTunes settings (check "enable WiFi sync", uncheck "prevent iPads from syncing", etc.). Since all other devices work and I actually can perform a wireless sync when initiated from iTunes, I don't see how the issue could live here at all.
    Any ideas? I'm pretty stumped!

    Another oddity: When this iPad syncs, it does NOT create a backup as part of the process (whether wired or wireless). All my other devices do, as one would expect...

  • Some music files missing in iTunes folder, yet work fine in iTunes

    I am using current version of iTunes on OSX 10.7.5.
    Let's use a song for example:  Piano Man - by Billy Joel on the Greatest Hits album
    In iTunes, this song works fine and all songs are there. 
    If I go to finder>user>music>itunes>itunes music>Billy Joel>Greatest Hits> .....  and not all the songs are there, maybe just a couple.  We will say Piano Man is missing right now. 
    If I go to iTunes and click on Piano Man> Show in Finder....  it takes me to the mentioned folder and then suddenly some more songs appear including Piano Man.
    I don't like this because my backup hard drive is not backing up all my music, some of it is missing.  What's going on?

    Found the issue:
    At first glance my itunes music folder looks normal, but after some careful reading of the location data...it turns out all of my music is also stored in a subfolder "MUSIC" in with all the artist names.  I found this after discussing with a genius today while having my battery replaced.  Together we found the issue.
    How?  iTunes at some point started making a MUSIC and MOVIES and maybe some other folders in the iTunes folder.  When I redid my library some time ago, it must have changed the directory and copied all my music to the user/music/iTunes/iTunes Music/Music folder.  This would also explain why I found that sometimes my library took up more data than I had expected.  iTunes would say 45 GB but the folder would say 90GB. 

  • HT1459 I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

    I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

    No one here said anything about an update or your device needing it.
    FYI, you are not addressing Apple here, we are all users like yourself.
    If the device is in recovery mode, the only option is to restore it.  All data on the device is gone.  This should not be an issue if the device has been used as designed and regularly synced/backed up.

  • HT203164 Cannot print CD Jewel Case Insert using Windows 7; iTunes print options work fine from Windows XP; using iTunes print option CD Jewel Case Insert with Windows 7 prints jumbled mess?

    Cannot print CD Jewel Case Insert using Windows 7.  iTunes print options work fine with Windows XP, but attempting to print CD Jewel Case Insert from Windows 7 yields jumbled mess.

    I'm having the same issue - when I try to change any print options iTunes freezes and I have to end the process in Task Manager... I was trying to turn off duplex printing and the printer option screen wouldn't take any input. I changed the default printer properties to turn off duplex; iTunes did not reflect the updated preferences. It looks like there is an unknown issue with the printer setup module - guess that doesn't get much use anymore or Q/A should have picked up the issue...

  • HT4363 i have switched my home shareing on itunes(latest version) i still cant connect. i have 3 gen tv and latest version itunes. airplay is working fine hel please

    i have 3 gen tv and latest version itunes. airplay is working fine. home sharing between tv n laptop not working

    Contact your carrier. If the carrier name is changing from IDEA to Idea, and it only fails consistently on one of them, then the problem is with the network.

  • Podcast episodes won't download in iTunes app (but works fine on desktop)

    Hi, I can't figure this out:
    Our podcast episodes simply won't download in the iTunes app on iPhone. The download simply stops at 10.3 kB (or sometimes at another value), without really getting started at all.
    This is very odd, since downloads are working fine in iTunes on the desktop, and in other apps on the phone (such as Instacast).
    Here's the iTunes-page for the podcast:
    http://itunes.apple.com/no/podcast/filmfrelst/id303539607?l=nb
    And here's the RSS feed URL:
    http://montages.no/filmfrelst_files/rss.php
    (The podcast is called "Filmfrelst", and is searchable in the iTunes app)
    Any clues?

    OK, seems like I located the problem - sort of.  It's not the feed that's the issue, but rather the fact that I'm pushing my MP3-files through a PHP script which does some statcounting. If I access the MP3 files directly, the iTunes app downloads them OK.
    So I'm guessing maybe my headers aren't exactly what the iTunes app is expencting? Here's a snippet from the PHP file which outputs the MP3 data:
    header('Content-Type: audio/mp3');
    header('Content-Length: 'filesize($location));
    @readfile($location);

  • ITunes wont open, worked fine until now

    When I try to open it, nothing happens.
    I opened Task Manager, clicked on the "processes" tab.  When i try to launch iTunes, i see itunes.exe appear for a nanosecond then it disappears and iTunes never launches.
    Anyone know what is going on or how to fix it?

    Ok, i fixed the problem.  Installed Quicktime and now all is working fine.

  • I cannot open itunes.  It work fine before the latest upload...

    Please help.
    itunes worked fine until I tried to download the most recent version.  Now it won't open at all.

    I am having a similar issue. It keeps asking for Quick Time version 7.5.5 and then shuts down. Are you getting any errors messages or is just a few bounces in the dock and then shut down?

  • Cannot synch ipod to itunes, other devices work fine

    One of my 3 ipods wont synch to itunes. I've gone thru the help/diagnostics. The device is detected and passes device connectivity tests but fails device sync tests "no ipod found." The test notes even show the device is working properly. When I hit synch, i get the windows pop up for an external device, it goes away before I do anyhting, it comes back again, and then the ipod attempts to synch but stops after a few seconds. I have the latest version of itunes 10.1.2. The device has space and plays correctly, it just isnt synching. The other nano and i touch work fine pulling in recently purchased tunes and songs. All of the playlists dont come over correctly but I can live with that. Would restoring the ipod help? Other ideas? Note, I recently moved my music library to this PC. I used music rescue to convert the tunes on this device back into itunes songs.

    Sorry no answers but having similar issue with my son's nano. We got a replacement and was able to sync and now it's not recognizing it. Looking for ideas.

  • New files dont play in iTunes , older files work fine!!! ????

    Hi. I just finished a new project in Logic Pro 7.1 and bounced it as usual.
    The wave file wont play on iTunes. I cheked previous bounced files and they play just fine. Also if i drag and drop this file in iTunes , nothing happens whereas files from past project open correctly.
    Then , i Downloaded a sample library today---all wave hits and loops. In my sample library folder these samples have the iTunes icon , but again they wont play in iTunes if i double click ono them or if i drag and drop them. Once again other files in my library from the past open just fine.
    Did i accidentally hit something or change a setting which makes iTunes not play my new files or samples ??
    Please help.
    thanks
    Faisal Baig

    AH HA! I fixed it. Now I don't know the root cause of the problem is but here is the fix:
    Select track(s) that are valid but are not playing.
    Goto: Advanced
    Click: Convert ID3 Tags...
    Check: ID3 Tag Version
    Select: v1.1
    Click: OK
    The IDv3 Tags will get re-written by iTunes to an older version that doesnt support album art thus purges the album art from the file itself but iTunes writes the bitmap to the folder and saves the album art info in your library database. Then you can go back and do the same process again and reconvert it to v2.4.
    This has worked so far with all of the files I was having problems with.

  • I can't seem to download anything on my iTunes when I use Check for available downloads. I have preorders that I can't download cos it just says 'iTunes store temporarily unavailable' even tho when I actually go on iTunes itself it work fine..

    I've been in contact with Apple support team regarding this issue. I have about 9 items available for download(preorders mostly) but it's not listed under download. When I click on Check for available download, a message with 'iTunes temporarily unavailable' appears but when I go to the iTunes store itself, its working just fine. I've already been charged twice for the same movie which Apple have kindly refunded me for one of them but I still haven't managed to download that movie yet. Apple says its a problem with my computer and given me all sort of ways to rectify the issue and still no hope. Everything else seems to work just fine including the actual iTunes store, wifi syncing and cable syncing etc. Can somebody help me with this if you know how to solve this problem or if you've had the same issue now or before?
    I am using the latest Software updates on my iTunes and these 9 items were purchased whilst on this new updates

    Launch iTunes on your computer.
    From the menu bar click iTunes > Preferences then select the Advanced tab.
    Click Reset warnings and Reset cache
    Click OK.
    Restart your computer, launch iTunes.
    Click Store > Check for Available Downloads...

  • My itunes app was working fine then all of a sudden I'm getting an error - The Itunes application could not be opened.  The required folder cannot be found.  But it doesn't tell me what folder.

    I am using Windows Vista.  My itunes launched fine until now.  Now I get an error - "The Itunes application could not be opened.  The required folder cannot be found".  I have no idea what file it is looking for.  Has anyone seen this error? 
    I have also tried to uninstall the package and I get the error Could not access network location %APPDATA%\.  And it won't uninstall.  I don't know why it's complaining in both cases. 
    Itunes was working 3 weeks ago with no problem.
    HELP!!! 

    hey did u ever get you itunes fixed?

  • Audio begins lagging behind video in iTunes;  other video works fine

    Something that appears to have started after iTunes 10.x as I don't normally play too many videos on the PC from iTunes is regarding video playback in iTunes. The longer a video plays the longer the lag between what's showing up on the screen and the audio portion. If I stop and start the video it starts off synced again and then begins lagging. If I go outside of iTunes I can play other video formats such as wmv, avi, with no trouble, DVD and BluRay playback are not affected. The video files from iTunes play fine on my iPad. I can see no obvious cause for this, any help or suggestions would be greatly appreciated. I have a decent high end PC running Windows 7 64 bit, with a quad core i7 processor, 6 GB of RAM, a terabyte of disk space, and an ATI 4870 HD video card.
    Thanks much!
    Chris

    I'm having the same problem. As I play ted podcast, the video starts lagging behind audio, and the longer I play, the more pronounced the effect. As I pause, video and audio re-synchronize.
    iTunes version:10.5.3.3
    CPU: x5675
    GPU: gtx 570
    RAM: 24GB ecc supp
    OS: Windows 7 64 bit Ultimate
    Codec pack: K-Lite
    Motherboard: p6x58-e
    Sound Card: Asus Xonar Essence STX
    Let me know if I can provide any information to help you fix this, it is very annoying

  • ITunes library was working fine on NAS, now busted

    Pretty much as it say. I had moved the iTunes library to a NAS and used it just fine on my Power Mac G5. The library file was there, as were all the tunes. Got the new iMac, and went to load up the iTunes library... nothing. Claims there is no librarty file. But it's there, same as it ever was, I can see it. This is driving me nuts.
    Should I just write off the dozens of playlists & ratings I created and start over? I really don't want to spend hours troubleshooting this crap. Hoping for an easy fix.

    No one here said anything about an update or your device needing it.
    FYI, you are not addressing Apple here, we are all users like yourself.
    If the device is in recovery mode, the only option is to restore it.  All data on the device is gone.  This should not be an issue if the device has been used as designed and regularly synced/backed up.

Maybe you are looking for

  • Listing The Database Objects Using Menu (combobox, list etc.)  With Flash Builder

    Hi, i try to learning flash builder and developing a simple application. i have a database and it contain a id, eser, baslik area. id : standart id area. eser : contain a long text baslik : title of the eser you can see the database below (i add a lo

  • Google map plugin and multiple addresses

    I was wondering if it was possible to show 2 or more locations in the google maps plugin? Either have two non-labelled markers or the A,B,C marker system that google maps uses. Can this be done within the Google maps plugin within iWeb? Thanks.

  • Combobox Cell Rendering

    I downloaded this cell rendering example for datagrids yesterday and I got everything to work just fine, except that the combo boxes that I render onto a datagrid don't display any information in them. Even when I do .selectedIndex = or call a setVal

  • SignTool Error when installing app

    When trying to install my locally published app, I receive the following error: SignTool Error: File not found: C:\Users\me\AppData\Local\Temp\MyApp.appx I've tried the Create an appx file for sharing option, but get a similar error. How can I get th

  • Deploying using ant to oc4j 10.0.3

    We previously deployed our application using ant to OC4J 902. Now we try to deploy to OC4J 10.0.3 but it seems that com.evermind.client.orion.OrionConsoleAdmin doesn't exist anymore. Could someone plz tell me by what it is replaced ? I found com.ever