Itunes 10.6.1.7 (on windows 7 64 bit) recognizes airport express, but will not connect.

I've attempted disabling all firewalls (both PC and anti-virus), disabling ipv6, rebooting the airport unit itself, but no luck. I'm not prompted with an error, however, as itunes is attempting to connect the airplay icon turns blue, and when it doesn't connect the icon turns gray again. On a sidenote, my old macbook connects without issue. Any ideas?

Thx Hackintosh. All software was up to date as of this morning, but I think the issue stemmed from the IP switching in my building. I finanlly stripped the express/utility completely off the box and reinstalled from scratch after doing a factory reset of the airport unit itself... and finally, eureka. Of course, doing this required resetting my apple machines to the updated airport address. I will say that if anyone wants to run both apple and PC machines on the same airport, set up the PC first and then link the apple machine(s) second. Way easier than the other way around.

Similar Messages

  • "My Windows 7 Dell will see Airport network but will not connect"

    "My Windows 7 Dell will see Airport network but will not connect" Can anyone help me out with this?
    Thanks,

    Yes, I have the Airport utility installed on the Windows 7 dell.

  • ITunes recognizes my iPhone, but will not connect to the iTunes Store

    After having to re-install all the software on my computer, iTunes will recognize my iPhone 4 okay, but will not log into the iTunes Store using a valid user name and password.  I can still log in to the iTunes store on my iPhone, but just not on my computer. I get an error message that says, "We could not complete your iTunes Store request. An unknown error occurred (-50). There was an error in the iTunes Store. Please try again later."  I also conducted the "Run Diagnostics" test for network connectivity tests, device connectivity tests, and device sync tests.  All three tests passed with green lights.  However, I still get the following error message "One moment please, Connecting to the iTunes Store, Loading..." when I highlight the iTunes Store and attempt to log in with no success.  I also disabled the Windows 7 firewall as I did get a previous error message that said iTunes was not enabled in the Windows firewall.  I have my computer configured the same exact way I did before having to reinstall all my programs, and iTunes worked fine.  I've included some of the comments from the diagnostics below...
    Thanks for any advice you can provide.
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-09-04 19:30:35.
    **** Device Connectivity Tests ****
    iPodService 10.4.1.10 (x64) is currently running.
    iTunesHelper 10.4.1.10 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Device Sync Tests ****
    Sync tests completed successfully.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • TS1363 my iphone 4 shows up in computer folder but will not connect to itunes

    I have unintalled and reinstalled itunes, updated iphone 4 and it still comes up in my computer folder but will not connect to itunes itself says there is an error to connecting help please!

    Hey there Jachin W.,
    It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section from toward the bottom if needed:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I have windows vista 32 bit operating system. tunes 11 will not install

    i have windows vista 32 bit operating system. tunes 11 will not install.

    Hi damanfromni,
    If you are having issues installing iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    - Brenden

  • I have a new iPod Classic 160Gb.  i have an iTunes Account, it recognizes my device but will not sync my library of music to my new iPod.  What do I need to do?

    I have a new ipod Classic 160GB.  I already have an Itunes account.  The Itunes account recognizes my device but will not sync my library to this new device.
    What do I need to do?

    Hi Amy2250,
    Have you tried to sync music to the iPod via the iPod subdirectory of iTunes? To do this, plug your iPod into your computer, go into iTunes, click on the iPod tab, click on 'Music' in the iPod subdirectory and select whether you want to sync your whole iTunes library or just selected songs and press sync.
    Alternatively, have you tried manually transferring music onto the iPod using the 'drag and drop' method? To do that, go into iTunes with your iPod connected, click on the iPod tab, in the iTunes iPod Classic subdirectory click on the 'Summary' tab, then tick the box saying 'Manually manage music' and click save. Then, in the same subdirectory click on the 'On this iPod' tab and click on Music. Then, select the songs you want to transfer either in Finder or Windows Explorer, select the songs you want to copy to the iPod and drag them to the blank list in the 'On this iPod' area of iTunes you just opened.
    Good luck,
    stefanrandomly

  • HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    Hi, jeantwin.
    Thank you for visiting Apple Support Communities.
    The steps in the article below may help you resolve the issue with push notifications.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    If the issue persists, try signing out of your Apple ID and then sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Jason H.

  • Apple TV will stream music but will not connect to iTunes library to stream movies or podcasts.  During the unsuccessful connection process, iTunes becomes unresponsive and must be forced to quit.

    Apple TV 3 will stream music via Home Sharing from iTunes on Mac running 10.6.8 but will not connect to iTunes library to stream movies or podcasts.  When trying to connect, iTunes becomes unresponsive and must be forced to quit.  ATV will stream movies purchased through the ATV but not those purchased through or ripped/copied onto the Mac.  I've tried fixes suggested for similar problems (rebooting ATV and Mac, signing out then back into iTunes Store) to no success.  Any suggestions will be appreciated.

    This is the most bogus example of Apple rip-off EVER.  They do not advertise this *feature* and yet expect people to invest in an Apple ECOSYSTEM?  My experience with Apple TV using a central media "server" (a dedicated Mac Mini) has been atrocious.  I continually get "Cannot connect..." messages and with typical Apple "it just works" mentality, there is no reason stated.  I HATE APPLE TV and I HATE APPLE.  Peddle your crapple somewhere else.

  • I was updating my iphone 4s on my computer and there was an error and my phone has the connect to itunes symbol but will not connect to itunes on my computer.  I am unable to use my phone and im not sure what to do..

    I was updating my iphone 4s on my computer and there was an error and my phone has the connect to itunes symbol but will not connect to itunes on my computer.  I am unable to use my phone and im not sure what to do..

    See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

  • My iTunes recognizes my iPod but will not sync

    I just had my hard drive replaced and all my music was salvaged (thankfully). All of it loaded right back into iTunes. However, when I plug in my iPod, it will charge, but will not sync. I have Windows 7 on my computer and it was working fine before.
    At this point I'm frustrated and have considered using the "Sync with this iTunes Library" feature, which warns that it will erase what's on my iPod, but will presumably upload the library that exists on my computer now, right? If I do that, I shouldn't lose anything because both are the same, but maybe it will now recognize my iPod? Any suggestions?

    Hi Amy2250,
    Have you tried to sync music to the iPod via the iPod subdirectory of iTunes? To do this, plug your iPod into your computer, go into iTunes, click on the iPod tab, click on 'Music' in the iPod subdirectory and select whether you want to sync your whole iTunes library or just selected songs and press sync.
    Alternatively, have you tried manually transferring music onto the iPod using the 'drag and drop' method? To do that, go into iTunes with your iPod connected, click on the iPod tab, in the iTunes iPod Classic subdirectory click on the 'Summary' tab, then tick the box saying 'Manually manage music' and click save. Then, in the same subdirectory click on the 'On this iPod' tab and click on Music. Then, select the songs you want to transfer either in Finder or Windows Explorer, select the songs you want to copy to the iPod and drag them to the blank list in the 'On this iPod' area of iTunes you just opened.
    Good luck,
    stefanrandomly

  • HT1212 My ipod is disabled and is connected to my computer but will not connect with itunes

    My ipod has been disabled and will not connect to Itunes

    Are you still holding the home button when you plug it in or do you let go?
    You want to make sure that you turn it off, hold the home button and plug it into the computer BUT do not let go of the home button. Keep holding the home button until you get the itunes symbol and the cable on the iPod.

  • ITunes sees remote speakers attached to airport express, but can't connect

    "An error occurred while connecting to the remote speaker "Airport Express". The network connection failed."
    iTunes 9.1(79)
    Airport Extreme Base Station
    Early model Airport Express connected to remote speakers
    iTunes see the speakers in the drop down menu, and the airport express is connected to my network. I restored the airport express to factory defaults and started over. Same thing. Firmware shows as being current. Express has steady green light.
    Any ideas? I am getting ready for my iPad, and need to get this fixed.
    Thanks in advance.

    Same problem for me. Ever since I upgraded to 10.6.3 and iTunes 9.1, about once per week I'll get the error message when trying to get iTunes/Airtunes to connect to my older Airport Express (running firmware 6.3) "An error occurred while connecting to the remote speaker <insert speaker name here>. The network connection failed." (No error codes are given.)
    Airport Utility sees the offending Airport Express just fine (and there's a green light on said AE).
    Curiously, a newer AE-n, elsewhere in the house (running firmware 7.4.2) does NOT exhibit this problem.
    Simply restarting the offending AE does NOT clear the problem. Restarting the main router - a Time Capsule DOES clear the problem. Alternatively, toggling off the Airtunes functionality on the offending AE, restarting it, then toggling Airtunes back on, and finally restarting it DOES clear the problem (as an alternate to restarting the router). No matter how the problem is cleared, it returns within a week. It's frustrating that the problem cannot be recreated immediately.
    Probably not relevant, but the computer on which I'm running iTunes (a Mac Mini) is connected to my TC via ethernet, not wirelessly.
    I've tried the suggestion of disabling ipv6. No effect.
    I fear the only solution will be to scrap my older Airport Express and replace it with a newer n-model. But before I resign myself to the $100 fix, any more ideas?

  • ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

    I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
    I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
    A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
    I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee.  I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
    I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
    I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
    How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
    I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
    Thanks for your help!

    I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

  • Upgraded iTunes no longer "sees" my airport express and will not network

    Since upgrading to iTunes 8.2, iTunes no longer recognizes or sees my airport express (there is no longer an option box on the lower right area of the iTunes info so I can select computer speaker or additional speakers. The iTunes help says it should recognize the network when it starts, but it doesn't. My Airport is working properly. Sure would like to get those living room speakers back in the game!

    I updated Airport Utility to 5.4.2 and even though it ended up telling me I hadn't changed my settings on the AE I use to play iTunes on my stereo, after the update of my Base and Express, the Multiple Speakers box appeared again on iTunes the next time I opened the iTunes window. Also, AU managed to, for the very first time, give me a solid green light on the AE, after a year + of blinking orange. So my advice is to update your Airport Utility and run it.

  • Magic Mouse and Windows 7: Discovered but will not Connect.

    Windows 7 (W7) can "Discover" the Magic Mouse (MM) but doesn't seem to be able to connect. Here is asolution.
    1. Turn Off your MM.
    2. Restart W7
    3. Connect a "Wired" USB mouse. (My Track Pad would not Right Click.)
    4. Open "Hidden Icons". (In the Right lower corner of your dispaly, in the "Tray" is a small "Triangle" icon. Mouse over this and you will see that this is the "Show Hidden Icons" icon. Click on it.)
    5. You should now see a Bluetooth icon. This is the "Bluetooth Devices" icon. Click on it.
    6. A Pop Up Menu appears. Click on "Add a device."
    7. Turn on your MM.
    8. Your MM should appear in the "Select a device to add to this computer." window.
    9. It will probably just say "Mouse" or "Bluetooth Mouse" If you have used your MM before on your Mac, it may display your Mac's "Short User Name". This means that W7 has "Discovered" your MM.
    10. Right Click on your displayed device.
    11. Click on "Add device..."
    12. Click on "Properties"
    13. Select/Click on the "Services" tab.
    14. Tick the "Box" for "Driver for mice, keyboard, etc. (HID)"
    15. Click "OK" and exit.
    Your MM should now work! Sort of!! Left & Right Click works and Up and Down scrolling works. Right & Left scroll does not.
    Also, you will note that your MM becomes "Inactive" after a few seconds of disuse. Just give it a single Left click to get it going again. I've posted a solution to this problem in another post.

    Thanks! That fixed my issues with my Apple bluetooth mouse and keyboard in Win7.

Maybe you are looking for

  • IPhone 4 not recognized in iTunes for Windows 8.1

    I am using Windows 8.1 and the computer recognizes the device but not iTunes. I have tried deleting and re-installing iTunes as well as the device manager, but neither solution has fixed my problem. Any help is appreciated!

  • RFC call results in StORAGE_PARAM_WRONG_SET

    I'm in trouble with a RFC call, the process is as following: SAP system A calls a report. This report selects FI documents via LDB SDF. After user selects one or more documents from the list I call a RFC to read the payroll posting results from syste

  • Date format YYYY inserted as 0006 instead of 2006

    Hi, I have a strange problem in 9i database. When I execute the following procedure from TOAD's procedure editor, it inserts the year as 0006, buth when I execute it from sqlplus it inserts correctly as 2006. So the scenario wherein the proc inserts

  • I have a question about the Siri function.

    Here in Belgium, we speak Dutch and also French and English. But I think when you use the Siri function it is always easier to use it with your own language ( Dutch). 28th October, the iphone4S will be launched here in Belgium, but only with a Englis

  • Force shutting down

    A couple times so far, my computer has simply run out of ram and completely froze. I open up force quit and quit a few programs but then it gets a pinwheel of death. I wait for like 5 mins and then I hold the power button for a few seconds so it forc