Itunes 10.6.1 crash for other language

Before I installed 10.6 and it just crashed continusly, would restore and I kept reinstalling. finaly I decided to go to an older version, what ended up been the perfect solution. Waited for next version where all bugs should be at the most fixed, but for a spanish configured mac, it just doesn't work. It keeps showing the message "this itunes version was unable tu update language, please use de english version" and... WHAM! it just closes on you and wont open at all... justo got to the previous version again... must I raise my expectations on a 10.6.2 o just pray for a 10.7 or 11???

does anybody know if there would be any problems keeping 10.5.2 on my snow leopard macbook and runinng the lateset 10 on my Lion macbook.? It seems like new OS's often kill old models so I've kept SL on the. macbook.
Match doesn't seem to be updating.
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz

Similar Messages

Error message:this version of itunes has not been localized for this language. please run the english version

Error message received when trying to open Itunes. This version of Itunes has not been localized for this language. Please run the english version.

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Adobe Premiere Pro CC launches for some users, but crashes for others.

I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
For these students, the following error appears:
Adobe Premiere Pro CC has stopped working
Check Online for a solution and close the program (Tried this nothing seems to come of it)
Close the program
I clicked View problem details
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: dvaui.dll
Fault Module Version: 7.2.2.33
Fault Module Timestamp: 532bed86
Exception Code: c0000005
Exception Offset: 00000000002d31c1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 3272
Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
Additional Information 3: 3e22
Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
-Barb

I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Problem in sending the smartform as email for other language except english

Hi Experts,
I could not send the smartform as an attachment for other languages, but where as i could send it in english.
The program is working fine with print priview but not when sending the SF as an attachment
(in other languages except english).
Please do find the below code which i used to send the smartform as an attachment.
Please let me know if there is any mistake in the code.
    wa_ctrlop-LANGU = nast-spras.
    wa_ctrlop-getotf = 'X'.
    wa_ctrlop-no_dialog = 'X'.
    wa_compop-tdnoprev = 'X'.
    CALL FUNCTION lf_fm_name                  "'/1BCDWB/SF00000197'
      EXPORTING
        control_parameters = wa_ctrlop
        output_options     = wa_compop
        user_settings      = 'X'
        is_ekko            = l_doc-xekko
        is_pekko           = l_doc-xpekko
        is_nast            = l_nast
        iv_from_mem        = l_from_memory
        iv_druvo           = iv_druvo
        iv_xfz             = iv_xfz
      IMPORTING
        job_output_info    = wa_return
      TABLES
        it_ekpo            = l_doc-xekpo[]
        it_ekpa            = l_doc-xekpa[]
        it_pekpo           = l_doc-xpekpo[]
        it_eket            = l_doc-xeket[]
        it_tkomv           = l_doc-xtkomv[]
        it_ekkn            = l_doc-xekkn[]
        it_ekek            = l_doc-xekek[]
        it_komk            = l_xkomk[]
      EXCEPTIONS
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        OTHERS             = 5.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
*Convert the data from OTF to PDF format
    it_otf[] = wa_return-otfdata[].
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = l_len_in
        bin_file              = lp_xcontent
      TABLES
        otf                   = it_otf
        lines                 = it_tline
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        OTHERS                = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    TRY.
---------- create persistent send request ----------------------
        send_request = cl_bcs=>create_persistent( ).
        len = XSTRLEN( lp_xcontent ).
transform to solix tab
        lt_solix =
          cl_document_bcs=>xstring_to_solix(
            ip_xstring = lp_xcontent ).
Create Body to the E-mail.
        APPEND Text-005 TO l_text.
Attachment Name
        l_ponumber = text-004.
        CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
        l_subject = text-001.
        CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
*TRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
    i_type        = 'RAW'
    i_subject     = l_subject
    i_length      = '13'
    i_language    = nast-spras
   i_importance =
   i_sensitivity =
    i_text        = l_text
   i_hex         =
   i_header      =
   i_sender      =
receiving
    RESULT        = l_email_object
CATCH cx_document_bcs .
*ENDTRY.
       CALL METHOD cl_document_bcs=>create_document
         EXPORTING
           i_type    = 'RAW'
           i_subject = l_subject
           i_length = '13'
           i_text    = l_text
         RECEIVING
           result    = l_email_object.
*Create PDF Document
        bcs_doc = cl_document_bcs=>create_document(
                                        i_type     = 'PDF'
                                        i_subject = l_ponumber
                                        i_length   = len
                                        i_language = nast-spras
                                        i_hex     = lt_solix
*Type casting
        obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
        CALL METHOD l_email_object->add_document_as_attachment
          EXPORTING
            im_document = obj_pdf_file.

hi,
i tried with ur problem.but i am able send mail in other languages also.actaullly i wrote a msg whether the mail has been sent or not.i got success message. i am placing my code here please go thorugh it,and do relavant modifications.
*& Report ZPPS_SMARTFORM_TO_PDF
REPORT ZPPS_SMARTFORM_TO_PDF.
PARAMETER: p_date LIKE sy-datum.
PARAMETER: p_rea TYPE char255.
DATA: t_otfdata TYPE ssfcrescl,
      t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
      t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
      w_bin_filesize TYPE i,
      wa_ctrlop TYPE ssfctrlop,
      wa_outopt TYPE ssfcompop,
      WA_BUFFER TYPE STRING,          "To convert from 132 to 255
      WA_OBJHEAD TYPE SOLI_TAB,
      WA_DOC_CHNG TYPE SODOCCHGI1,
      W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
      V_LINES_TXT TYPE I,
      V_LINES_BIN TYPE I,
      nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSR_DEMO1'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = form_name
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = wa_ctrlop
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = wa_outopt
   USER_SETTINGS              = 'X'
    MYDATE                     = p_date
    REASON                     = p_rea
IMPORTING
DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            = t_otfdata
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
   MAX_LINEWIDTH               = 132
ARCHIVE_INDEX               = ' '
COPYNUMBER                  = 0
ASCII_BIDI_VIS2LOG          = ' '
PDF_DELETE_OTFTAB           = ' '
IMPORTING
   BIN_FILESIZE                = w_bin_filesize
BIN_FILE                    =
TABLES
    OTF                         = t_otf
    LINES                       = t_lines
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'MAIL-ID'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    DOCUMENT_DATA              = WA_DOC_CHNG
    PUT_IN_OUTBOX              = 'X'
    COMMIT_WORK                = 'X'
TABLES
    PACKING_LIST               = T_OBJPACK
    OBJECT_HEADER              = WA_OBJHEAD
    CONTENTS_BIN               = T_OBJBIN
    CONTENTS_TXT               = T_OBJTXT
    RECEIVERS                  = T_RECLIST
EXCEPTIONS
    TOO_MANY_RECEIVERS         = 1
    DOCUMENT_NOT_SENT          = 2
    DOCUMENT_TYPE_NOT_EXIST    = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR            = 5
    X_ERROR                    = 6
    ENQUEUE_ERROR              = 7
    OTHERS                     = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
and i thought of one more soluyion u can write
wa_ctrlop-langu = T002-spras. i think it will also help for u.
revert back if any questions.
please reward me if helpful.
gupta.pullipudi

Specifying alphabetic sort order for other languages.

The alphabetic sort order differs slightly for other languages then the English one. I rewrite the alphabetics in the special text flow of the Reference Page of the index file, regenerate the index file, but the result is wrong. The special Group Title characters for greek, hungarian, czech, russian etc. languages are combined among latin Group Title characters.
We work in FM 8 to create 3000 pages technical documentation in 14 languages. The output will be pdf file and help system. Our main problem now the index Group Titles sort order. Could you help me to solve this problem?
Thank you so much
Eva

Michael,
Thank you so much for your answer. It works great. I have a promlem only one letter, which is in the Czech alphabetics: "Ch". This letter would be after the "H". I have edited the sort order like this:
Symbols[\ ];Numerics[0];A;B;C;Č;D;E;F;G;H;Chch;I;J;K;L;M;N;O;P;Q;R;Ř;S;Š;T;U;Ú;V;W;X;Y;Z
<$symbols><$numerics>Aa Bb Cc *Čč* Dd Ee Ff Gg Hh Chch Ii Jj Kk Ll Mm Nn Oo Pp Qq Rr Řř Ss Šš Tt Uu Úú Vv Ww Xx Zz
The result in the generated index is, that the index entries beginning with Ch comes on below "C" and the GroupTitle "Ch" is disappearing. Take a look at the result in the generated index file, what I am talking about:

Dictionaries for other languages?

I have found only American English dictionary in my OS. I would like to add dictionaries for other languages (not translating dictionaries). Does anyone know where I can find more?
Thanks.

I have found only American English dictionary in my OS.
For spell checking, 10.4 already includes dictionaries for Australian, British, and Canadian English, German, Spanish, French, Italian, Dutch, Portuguese, and Swedish.
If you are talking about Dictionary.app, it's possible to add dictionaries if you upgrade to 10.5:
http://m10lmac.blogspot.com/2008/03/more-dictionaries-for-leopards.html

Images for other languages

Hi,
are the gif's available for other languages? I mean I have now english installed and this will give for the GO button a image on the button named go.gif. Is the go.gif also available in other languages or should I change the gif file myself?
Thanks
Herald ten Dam

There are a number of so-called translation memory tools that can translate MIF files. There's a Wikipedia article on translation memory tools: http://en.wikipedia.org/wiki/Translation_memory
We use Star Transit, but SDL Trados can do the job as well and there are a number of other tools. These tools separate text from formatted. Then the text is segemented. This allows you to reuse previous translations when the source documents is modified. Only new and modified segements will have to be translated then. These tools are very useful, but most of them are very expensive. A pretty new tool which is more affordable is memoQ (which I have never used myself). It is available from http://en.kilgray.com/.
As for screenshots, I think the most important thing is to make sure that they are imported by reference.
HTH
Susanne

I choose french language in the menu but itunes and apple store stay in other language ?? thks U for your help, I choose french language in the menu but itunes and apple store stay in other language ?? thks U for your help

I choose french language in the main menu but itunes
but application apple store stay in other language ??
thks U for your help

iOS: How to change the language when it's set to one you don't understand
http://support.apple.com/kb/HT2371
iTunes: Changing the display language
http://support.apple.com/kb/ht2242
iOS: Using international keyboards
http://support.apple.com/kb/HT4509
 Cheers, Tom

This version of Itunes has not been localized for this language

I received this message when trying to enter Itunes
This version of Itunes has not been correctly localized for this language
How do I get rid of it?

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Auto_lexer (stemming) not working for other languages(other than english)

Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

In the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2    (pkey            NUMBER,
3      lang            VARCHAR2 (2),
4      short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3    VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5    VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7    VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9    VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11    VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13    VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15    VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17    VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19    VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21    VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2    -- word list:
3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
5    -- english lexer:
6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7    -- german lexer:
8    ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9    ctx_ddl.set_attribute      ('german_lexer', 'composite',       'german');
10    ctx_ddl.set_attribute      ('german_lexer', 'alternate_spelling', 'german');
11    ctx_ddl.set_attribute      ('german_lexer', 'mixed_case',       'no');
12    ctx_ddl.set_attribute      ('german_lexer', 'base_letter',       'yes');
13    -- multi_lexer:
14    ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15    ctx_ddl.add_sub_lexer      ('global_lexer', 'default',            'english_lexer');
16    ctx_ddl.add_sub_lexer      ('global_lexer', 'german',            'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5    ('lexer            global_lexer
6       language column lang
7       wordlist       my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey           NUMBER,
   lang           VARCHAR2 (2),
   short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute     ('german_lexer', 'composite',          'german');
ctx_ddl.set_attribute     ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute     ('german_lexer', 'mixed_case',          'no');
ctx_ddl.set_attribute     ('german_lexer', 'base_letter',         'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'default',             'english_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'german',              'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer            global_lexer
    language column lang
    wordlist         my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/

PLD Invoice localization for other languages in SBO 8.8

Hello,
We are installing SBO 8.8 in our client.
After we have designed the standard layouts (Invoice, Purchase Order, etc) in Portuguese langua, our client wants to create them also in English language.
Is there any way to translate them automatically?
Do I have to create a new layout for each language or is there any way to simpligy the layout translation?
I tried to find info in the PLD manual (How to Customize Printing Templates with the PLD) but found no help on it.
Thanks,
Manuel Dias

Thanks Bala,
It that's true, then the field "Language" in the business partner master data is unusefull.
When I open the SBO business partner documentation from SAP, related to this field it says:
"Language: If the business partner is located abroad and you want to print documents in his local language, specify the required language. By default, the company language is displayed.
Note 1: Before you print documents for foreign business partners, ensure that the foreign language fields have been translated.
Note 2: The field is only displayed if you have selected Multi-Language Support on the Company Details: Basic Initialization tab.
It seems that there is a way to translate the foreign language fields, base on note 2 statement.
Am I correct?
Thanks again,
Manuel Dias

Adobe Product Setting for Other Languages

Im a new user of Adobe *Photoshop* CS3 Extended and Adobe Illustrator CS3. . Is Adobe *settable* to other Language other than English??? if so . . how is it done??? thanks

hello i want to change the language of my version of cs,actualy my
version is in potuguais i want in french.what is the solution ?
i had a problem for open my image with the french enteprise for print
the french cs say " i dont recognize the target " why and how open?

Locale.getDefault() for other language OS

I have a Swedish operating system and would like to get Swedish as the default locale. However, looking into the Locale API there seems to be no constant for Swedish. It seems to be limited to 10 or 11 languages in total. How can I detect OSs that is based on other languages than those 10 or 11 mentioned in Locale?

Yes, spell check in OS X is totally separate from the choice of input source. It can also be set in system prefs/language & text/text/spelling, but that is even less convenient. I don't know of any easier way than what you have already discovered.
However there is at least one app, Nisus Writer, where the app preferences can be set so as to link the keyboard, spellcheck, and font for any given language, with the whole set choosable via a single keyboard shortcut.

ITunes Store option to search for "other versions" of songs?

When searching for music, there used to be an option to search for "other versions" of the same song -- and it seems to have disappeared. I found so many other great artists doing covers of songs! Writing to Apple Support did not produce a response. Wondering if anyone here knows?

It's too bad they took away this feature. I used it all the time to find other good versions of a song by different artists.
I previously took multiple painful steps to go back to an earlier iTunes version when I discovered that iTunes 11 dropped the "sort" feature. When I heard that the recent version allowed sorting, I downloaded it. However, when they reinstated the sort feature, they apparently did not include the "other versions" feature.

Anyone Using iWeb for Other LANGUAGE content?

Hi,
Do any iWeb user create their website with other language such as Chinese,Japanese,Korean...??

Hi Tom,
Thanks for the kindness!
OK.I've create some entries of blog and name it with English and Chinese..while click on it when published it shown at the URL as www.xxx.com/blog/iloveuxxxx(with chinese words)...
When i try to email the similiar address above to others...the link will not complete because of the Chinese words...means,the link will only highlight as www.xxx.com/blog/iloveu and the xxx(chinese words) can't be highlighting...at last,friends unable to log on the full address...
Because of that issue..i've decided to changed the entries' title to English Only...now i publishing the iWeb and visit my website after published and click on the entries of blog as i said above..and the URL shown the same address as before i changed...however i publish and even publish all to MME..i doesn't work...
Do anyone know what's happen to the issue above?shall i delete the chinese words in every html of the entries' blog?
Thanks and Appreciate!!

Itunes 10.6.1 crash for other language

Similar Messages

Maybe you are looking for