ITunes 10.6.3.25 does not stop being the default audio player

I have tried to disable the setting for iTunes from being the default audio player but, it does not work.
After unchecking the box under:  Edit -> Preferences -> Advanced, clicked OK, closed iTunes and reopened it, the check box for this feature remains checked!
The older version of iTunes version 10 did work until I upgraded to this version (10.6.3.25).
I hope someone fixes or has a work around for this soon...It's really an inconvenience!
Cary

Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

Similar Messages

  • With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

    With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
    iPad2 sync is fine.
    Any ideas to solve it?

    This sounds like a problem you should take up with Apple Customer Support.
    The other users like yourself here are not going to be able to help you with this problem.
    Allan

  • My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup.
    In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Last,
    - Restore to factory settings/new iOS device.      

  • Pointer does not move to the default button in the dialog box

    example: when cleaning out trash the pointer does not go to the default button in the dialog box, you have to manually go there.
    This happens all the time.

    Hi Abhishek,
    In SAP this job shows completed till the 3rd step. and no error in the job log. but it does not execute the 4th and the 5th steps. And in Redwood, it shows completed for 1st and 2nd steps, 3rd step is in Error but has no error log. The 4th and 5th steps are in chained status. I have not amended the job chain after import. I have just scheduled it as it was running in the SAP system.
    Let me know if you need some further information on this.
    Regards
    madhu

  • Lacking sufficent privilges to make ITUNES the default Audio player.

    Never had any problems until updating to this latest version of ITUNES but it now gives me the "you lack sufficent privilages" message whenever I try to set ITUNES as the default player for audio files in preferances.
    I've set my permissions on MY DOCUMENTS/MY MUSIC and all sub-folders/files to full control for everyone and yet this problem persists.
    I have went into program access control and set ITUNES as default and it acts like it is setting it as default but when I open ITUNES it asks me if I want to set it to default player I check yes and it promply tells me I lack sufficent privilages to do so.
    I am of coure running as an ADMIN account.
    I am running XP PRO with all latest updates and patches
    SPYBOT S&D
    SpywareBlaster
    AVG anti-virus
    AD-AWARE SE
    COMODO Firewall
    I have tried changing things with all of the above security items turned off on 2 differant ADMIN level accounts and the result is the same...no joy
    My computer has Two ADMIN level accounts on it and a VISITOR account with limited privilages...could the limited Privilage account be causing a problem as it was added after my original install of ITUNEs (version 6.whatever) and was already installed on the computer when I installed the current upgraded version.
    Since ITUNES installs it's startup ICON in the ALL/USERS folder could the fact that the one account has limited privilages prevent allowing the change to be made on all accounts??
    If anyone has the solution please respond...this version should be called LOONEYTUNES cause that is where it is driving me!!

    It makes and keeps all the changes I make in preferances with the exception of making ITUNES the default audio player. The only solution or work around has been to go and right click on say a MP3 file select file/open with/select ITUNES check the box always open with this program box and then it will open the Mp3 files with ITUNES.
    It kinda gets what I want done I suppose, but I, like the Dyson vacuum guy on TV believe things "should work as they as supposed to".
    As yet ITUNES Ver.7 has been a disappointment, as long as windows XP has been around and as widspread as the usage of ITUNES is on windows platrom machines, IMHO there is no excuse for these kind of compatability issues.

  • Subvi does not stop from the mainVi immediately when the stop button pressed in the mainVi

    Hi guys,
    I have a mainVi which has a subVi inside. I want to have a kind of emeregency stop button in my mainVi.
    when I pressed the button, the program does not stop instantly. it does one loop and then stops.
    please help me to solve this problem.
    Attached you can find the Main and SubVI
    Attachments:
    Sample2 MainVI.vi ‏18 KB
    Move_MINI Editted SubVI.vi ‏13 KB

    This is basic dataflow. Any code is available to run as soon as data is present on all its inputs. No data is present at its outputs until all the code inside has completed.
    What this means in your case is that the stop button will likely be read almost instantly when the while loop starts an iteration. It will not be read again until the start of the next iteration. This is why it will usually take an extra iteration to stop. You can either force it to read the stop button after the other code inside the loop completes or use a Producer/Consumer (events) architecture where the stop button will be read in a parallel loop containing an event structure.
    It also means that the Move_MINI subVI has no means of responding to any external events (such as the stop button being pressed) after it has started running. All the other subVIs are missing so it is hard to tell what is going on. From the control labels and VI names I suspect that this may be some kind of motion control system. If so it probably takes 100s of milliseconds to seconds or longer to complete a move. To allow an external event to modify the behavior of such a VI, you need a means of communication between the event (stop button) and the VI. A notifier may be an appropriate choice. The VI also needs to be configured in such a manner that it never goes more than about 100 ms without an opportunity to stop. Without knowing more about the subVIs, I cannot say how this might work.
    Lynn

  • Office documents does not open in the default office application from Search Results

    1 WFE + 1 App Server + 1 server for OWA + 1 separate DB server make up our DEV SharePoint 2013 environment. We migrated many web applications from our SP 2010 environment to SP 2013 environment. Client integration is enabled and "Open
    Documents in Client Applications by Default" feature is enabled at the site collection level. OWA is enabled and working on the search results, such as showing preview.
    From the document libraries, if I open office documents like word, excel and PowerPoint, they open in the respective office applications. However, from the search results, when I try to open by clicking on the result, it opens on the browser.  I want
    OWA to show document preview but still want to open the document in the default office application. How to overcome this?
    I have IE 8.
    Thanks, Soumya | MCITP, SharePoint 2010

    Go to the bottom of the Search page, you will see a Preferences link:
    From there, you can set your preference. This is a per-user setting and as far as I'm aware, cannot be set globally.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • When I open a new window, the spinner does not stop, or the window open

    I have a MBP 3 yrs. old, running Snow Lep. When I open a new window, the spinner in the address bar spins and window does not open unless I click on the X and stop the spinner. Some times this doesn't work either. It just hangs up trying to open the next window.

    The given are very little details about your problem so please elaborate. 
    2. on each page load you have to verify whether the session variable. if "IsLoggedIn" exists and its value is "true" then you can show the requested page otherwise redirect to login page.
    if(Session["IsLoggedIn"] == null || Session["IsLoggedIn"] != "true")
    Response.Redirect("login.aspx");
    Better way: use a master page. In the load_page event, check the session. Thus, you wouldn't need to write the method to check in every page, just in the master page.
    Noam B.
    Do not Forget to Vote as Answer/Helpful, please. It encourages us to help you...
    Masterpage is a better idea.
    But The login page shouldn't use MasterPage OR need to have logic to check before redirecting to login page if you are already in Login page.
    Otherwise you will get into Recursive Redirection error.
    hope this helps.

  • Capture Now does not stop after the limit is exceeded........

    Hi,
    I'm using FCP HD 4.5 on a DP500 G4, OS 10.3.9. I'm doing "capture Now" to get some VHS video into my machine. FCP will not stop the capture no matter how I set the time limit. This used to work, so what did I do??
    Quite frustrating.
    I've told FCP that I'm using a "non-controllable device" but the capture just keeps on going and going and going..........
    Help......
    Pete D.
    dual 500 G4 Mac OS X (10.3.9)

    When I tell it to stop it responds and stops just fine..... if it's been going for 10 minutes I have a 10 minute long file - even if the limit was 3 minutes......
    What happens when you tell it to stop rather than
    relying on the time limit?
    x
    Do your part in supporting your fellow users. If a
    response has been Helpful to you or
    Solved your question, please mark it as such
    as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered
    when you get enough information to close the thread.

  • Unable to set iTunes as the default audio player - do not have enough access privileges for this operation

    I have just upgraded to iTunes 10.5.1.42 (from 10.5.0.143).
    When iTunes is launched, a message from iTunes came up saying:
    iTunes has detected that it is not the default player for audio files. Do you want to make iTunes the default player for audio files?
    [   ]  Do not show this message again
                                [ Yes ]   [ No ]
    Clicking the Yes  button, another iTunes message appears:
    An error occurred while updating the default player for audio file types. You do not have enough access privileges for this operation.
                                    [ OK ]
    I found in Googles as well as from some of my own notes dated a few years back which others (and myself) encountered the same problem before. I don't recall what was the solution to this annoying problem. Maybe I should just check the first box and tell iTunes to "shut up"? It seems that iTunes is already the default program designated to open audio files like MP3, WAV or what not. Why does it need to be set as the default player again?
    Come to think about it, I do have a few files with .aup as extension. These were played with "audacity". Perhaps that upsets iTunes player?

    Hello magestecal,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Take care,
    Alex H.

  • SWFobject does not work with the latest flash player update in IE

    So I get an installer show up this morning for the new flash
    player after installation and testing of my site. It appears
    SWFobject is not working in IE anymore. But it still works fine in
    everything else.
    What the hell is going on!?

    quote:
    Originally posted by:
    Krolben
    The bug comes from the newest automatic Microsoft updates for
    Win XP. I've noticed it on quite many major sites and testes on
    several computers. Those that have not yet been updated with the
    latest Win XP patches access the site fine. Those that have been
    patched seem to fail when the site checks the flash plugin version
    in IE 7.
    This is tested on sites using both swfObject and the Adobe
    runActiveContent solution.
    He is right. I am a Web designer and after a windows update
    tonight all pages using swfobject stopped working unless I add the
    code "?detectflash=false" into the address bar. This problem has
    even rendered a major site like www.fox.com unusable in IE7.

  • Photoshop CS6 Brush Manager does not show all the default brushes

    The brush panel shows all the default brushes, but the Brush Presets panel and the Brush Preset Manger do not, intact the last brush that they show is "100 Rough Round Bristle". it only shows the first 67 at max... if you delete anything before the 100 Rough Round, that becomes the new default number. It's like the rest of the brushes don't exist. Although I can select them in the Brush Panel.
    If I want to load any other brush set, it over writes any brushes that appear after "100 Rough Round Bristle".
    Need some serious help as my workflow is being severely hampered.
    Cheers!
    Arlen

    Which operating system are you using?
    Could you post a screenshot(s) of the issue?

  • Hello, I have a Dutch bought iMac but live in Sweden my ID will not allow me to shop in Itunes  and this confuses me, my iTunes is in Dutch, but my Swedish Itunes ID and Apple ID does not work in the Dutch store...only thing I wnat to do is to be able to

    Hello everybody,
    I bought my iMac in Holland in 2009 but I live in Sweden, I made an Apple id here and it works for the Apple Store, but it doesn't work with Itunes as I have my itunes in Dutch of course and am right away transferred to the Swedish iTunes and am told I can't buy music because I live in Sweden and am directed to itunes sweden on top of that I am not such a Swedish speaking or reading person and now I am stuck:(, I can't do anything with music and such, does anyone of you out there know how to solve this problem?
    It's a worldwide problem because as soon as a site knows your ipaddress it right away transfers you to the site in the country you live in, idiotic to my view, we have open borders, many people living in countries that they were not born in, many prefering to have their computers in their native language and then meet problems!
    Have a nice day/evening all:)
    greetings from
    Gonda

    Gonda...
    Not just a language issue...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching your billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Workflow does not stop after the first reject

    Hi!
    We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally reusable Approval
    Workflow. So I tried creating a new workflow attached to a list I created.
    In this process, when the list is submitted, it needs to be approved by 2 people sequentially - John Doe & then Billy Bob.
    When I create a new workflow, I click on actions and select "Start Approval Process". After doing that, it populates Step 1 with the following line - Start Approval process on Current Item with these users. I clicked on "these users" link and added the approvers
    in sequences - John Doe, then Billy Bob.
    I saved the workflow, checked for any errors and published the workflow. While testing with this workflow, I realized that when John Doe rejects the process, the task is still assigned to Billy Bob when it is actually suppose to stop.
    How can I stop this workflow right after John Doe rejects the process?
    Any help will be appreciated!

    Hi whocareswhoiam,
    Please post your question to Office 365 forums for quick reply. Below is the link.
    http://community.office365.com/en-us/f/default.aspx
    Thanks for your understanding.
    Best regards,
    Emir

  • Ringing does not stop when the contact answers.

    When I call someone and that person answers, the phone keeps ringing until the end of conversation. Any solution? Iphone 4S running IOS 7.1
    This happens from IOS 7.0.4 -> 7.0.6 -> 7.1, since I brought the phone, and I brought 2 of them, same situation on both...

    Hi,
    Did you find a fix for that ?
    Cheers,
    Yann

Maybe you are looking for