ITunes 10.6.3.25 unresponsive windows7 64bit

I don't know much about iTunes.  I'm running a fast desktop PC running Windows 7 64bit Home Premium with all patches applied.  Plenty of memory and HD space available.  I have used iTunes a few times to charge up my Nano 6th edition and sync it with some of the music (a few dozen songs) I have in the my iTunes library. 
Today when booted the PC & I launched iTunes, it told me there was a new version of iTunes available.  I allowed the software to download & update and then immediately rebooted. Now, whenever I reboot and launch iTunes (now at 10.6.3.25) it starts OK and I can even play a song.  But if I do anything else in iTunes, iTunes immediately becomes unresponsive and I have to "end task" in Windows Task Manager to get rid of it - and then I reboot again.  For example, in iTunes I clicked on 'help/about', it told me I'm at 10.6.3.25, but when I next clicked on "help/diagnose", nothing happened and iTunes was non-responsive.  On another try (also after a reboot) I clicked on a playlist name which did display that it had 2 songs.  I right-clicked on the playlist name and selected delete - and then iTunes was again non-responsive.  Rebooted again &  did a full download and install of iTunes from Apple (just in case the 1st download/install was defective) and installed the new file (install looked good) & then rebooted.  But problem remains.  What to do?
ps - on the last reinstall I did select to "repair".

Update -
Using Windows Control Panel, I uninstalled:
Apple Mobile Device Support
Apple Application Support
Apple Software Update
Quicktime
iTunes
Then I rebooted and installed the 10.6.3.25 iTunes, which also installed the apps I listed above, except for Quicktime.
Then I rebooted again and launched iTunes.  The 1st thing I tried was to click on to "check for updates" from the iTunes "Help" dropdown menu.  iTunes immediately became non-responsive and I had to use Windows Task Mgr to get rid of it.  So - as far as I can tell, a complete uninstall-install of iTunes does not fix my problem. 
HELP!!??   

Similar Messages

  • Impossible d'installer itunes version 11.1.4 pour windows7 64bits.J'ai trois codes d'erreur.Error7(windows error 1114),R6034,code erreur2203.Merci pour votre aide

    J'ai voulu installer la nouvelle version d'Itunes 11.1.4 pour windows7 64 bits.
    Après 5 tentatives, j'ai toujours les mème codes d'erreur.
    3 au total
    Error7(windows error 1114)
    Runtime error program:C.\Program Files(x86)/Itunes.exe R6034
    Code error is 2203

    La réponse est un peu technique, dîtes nous, après les avoir testées, si les solutions proposées ont pu vous aider.

  • Can't re-install iTunes on Windows7 64bit PC.

    Can't re-install iTunes on Windows7 64bit PC. Tried uninstalling Apple programs in correct order and starting again with new download but I can't install Apple App support which means iTunes won't work. May be something to do with microsoft visual c++ redistributable package x86 which I cannot repair.
    Help please!
    Thanks
    Mike

    A hint from another thread suggests that temporarily disabling the Windows Firewall may help with the installation of the C++ Redistributable components.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Apple TV2 can see my laptop but it can't access the files in on my laptop. Home sharing is turned on. I'm using Windows7 64bit. ATV2 can access the files on my other laptop and PC. I've updated my iTunes and ATV2. Any suggestions?

    Apple TV2 can see my laptop but it can't access the files on the laptop. ATV2 can access the files on my other laptop and PC.
    My PC can see the laptop in question but it can't access the files.
    I've updated iTunes to and ATV2 to the lastest version. My laptop is running Windows7 64bit.
    Any suggestions?

    Welcome to the Apple Community.
    I assume you taken the step of restarting the laptop.
    Have you checked your security software is allowing access for iTunes, which security software are you using.

  • Windows7 (64bit) and itunes 64-bit installer failing

    I'm trying to install the itunes 64-bit installer on my new windows7 64bit system to sync my phone and pad but comes up with the following error
    any ideas?

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • The itunes package for windows7 64bit is not the update version.

    hi Apple, my os is windows7 64bit, I have download iturns from the 10.5.2 link, but the package is 9.2. The size of the file is 97,512,248 bytes. Could you update the file?

    Anyone the same problem?

  • Ipod nano 5 gen and windows7 64bit

    i recently brought a new pc running windows7 64bit,ive managed to transfer my itunes library but i cant add any more music to my ipod ive tryed reseting ipod and reinstalling itunes version for windows7.when i plug my ipod into pc it does register but i cant add or remove tracks.any ideas

    You posted to the wrong area of discussions. This is the 5th Generation iPod group (the video full sized iPods that were released previous to the "Classic" models). If you are asking a Nano question, you want to post to this area...
    http://discussions.apple.com/category.jspa?categoryID=265
    Regards,
    Patrick

  • Unable to UNINSTALL "hp Color LaserJet CM1312 MFP Series" from Windows7 64bit OS on HP-8730w

    i am unable to UNINSTALL the "hp Color LaserJet CM1312 MFP Series" from Windows7 64bit OS installed on HP Notebook 8730w Mobile Workstation.
    If i click the uninstall button using the original printer driver CD, nothing happens; no error messages either.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Acrobat Pro XI not working at all in Windows7 64bit - tried everything

    I am using Acrobat Pro XI not working at all in Windows7 64bit - tried everything. About a month ago I built new computer. Acrobat worked fine. In last week it started not producing PDFs using Save As and would crash when processing scanned document. So I redownloaded exe file, used the acrocleaner to erase existing program, and reloaded Acrobat Pro XI.
    No the program will not start at all. Freezes when opening by clicking PDF file or by opening program icon.
    plz help

    Hi dufflebag123,
    Please try the following basic troubleshooting steps:
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing in the new enabled Admin user account and check.
    Regards,
    Rave

  • HP 2000-2209 TU - drivers for Windows7 64bit

    Hi,
    I have recently installed Windows7 (64bit) on my Laptop HP 2000-2209 TU.  Since then my Wifi/ Wireless network  is not working. 
    I tried to download it from the Hp website, but they have drivers for Windows8 only.
    Could you please help me to resolve this issue?
    Thanks in advance
    Baiju

    You're very welcome.
    You need these drivers for the devices you listed...
    Ethernet Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104622-1&cc=us&dlc=en&lc=en...
    Network Controller:  See my instructions below.  I need more info on that.
    PCI Device:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127099-1&cc=us&dlc=en&lc=en...
    PCI Simple Communications Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104495-1&cc=us&dlc=en&lc=en...
    SM Bus Controller:  Install this driver first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104727-1&cc=us&dlc=en&lc=en...
    Wireless card (Network Controller):
    I will need you to perform a simple set of clicks in order for me to identify the model wireless card that needs the driver.
    Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category.  The network controller device will have a little ! mark next to it.
    So, find the network controller device, click on that and then click on the Details tab.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that list and select the second item (Hardware ID's).
    Post the top string of characters you see in the window.

  • GW 7.0.4 Windows7 64bit Scrolling crash

    Hi,
    We have several users running GroupWise 7.0.4 on different Windows7 64bit laptops. If they try to reply to a long e-mail and scroll down to the bottom and then up, GroupWise crashes. If they use the mouse wheel then GroupWise is fine. It only happens when the use the scrollbar. They have different models of Dell laptops. Some are XPS and some are Latitudes. Other users have the same model of Latitude running Windows XP sp3. The XP machines work without issue. Everyone in the office runs Office 2010 and Grouplink's ContactWise. Unfortunatly, the people running Windows7 64 are officers of the company. Getting much time at any of their machines is hard. Right now they use the mouse wheel but they grumble that Outlook won't have this problem.
    Thanks,
    John

    On 6/15/2012 7:46 AM, jkenney57 wrote:
    >
    > Hi,
    > We have several users running GroupWise 7.0.4 on different Windows7
    > 64bit laptops. If they try to reply to a long e-mail and scroll down to
    > the bottom and then up, GroupWise crashes. If they use the mouse wheel
    > then GroupWise is fine. It only happens when the use the scrollbar.
    > They have different models of Dell laptops. Some are XPS and some are
    > Latitudes. Other users have the same model of Latitude running Windows
    > XP sp3. The XP machines work without issue. Everyone in the office runs
    > Office 2010 and Grouplink's ContactWise. Unfortunatly, the people
    > running Windows7 64 are officers of the company. Getting much time at
    > any of their machines is hard. Right now they use the mouse wheel but
    > they grumble that Outlook won't have this problem.
    > Thanks,
    > John
    >
    >
    Interesting.I have dell laptop, gw 7.04 client, windows 7x64 and do not
    experience this issue. Studio 17 model.
    Could this be
    some setting in the touchpad? I remember modifying mine quite a bit,
    turning off most of the special features.
    Does it occur with PGUP/PageDown/Arrow Scrolling?

  • Windows7 (64bit)へIllustrator CS4をインストールしようとするとエラーが出る

    Windows7 (64bit)にIllustrator CS4をインストールしようとすると、"Critical errors were found in setup. Please see the setup log for details" というメッセージが出てインストールが止まってしまいます。
    過去の質問やネットの質問サイトを見ても、完全に該当する記事が見当たらず、お手上げ状態です。
    今まで使っていたPC (Windows Vista SP2 32bit) が先日動かなくなり、急きょWindows7 (64bit) のPCにインストールすることになりました。
    PCのスペックはCPU: Intel Core i5, Mem: 8GB, Storage: 256GB SSD です。
    よろしくお願いします。

    早々のコメント、ありがとうございます。
    ご提示されたリンク先の文章は、既に読んでおりました。
    問題のPCには、Illustrator以外のCS4製品はインストールされていません。
    （Adobe製品は、Reader XI, Acrobat 9 Srandard, Flash, AIRだけです）
    リンク先の最後から2番目の内容は、他のCS4がインストールされていて、それをアンインストールしても、
    Windowsのアンインストール画面の一覧に表示されていて…（以下略）というものだと思われましたので、
    本件とは完全に一致しないと認識しました。
    他に何か思い当たることがありましたら、またコメントしていただけると幸甚に存じます。
    これからも、よろしくお願いします。

  • 3000 J 115 Vista Premium 32bit - cant boot from CD/DVD drive to do clean Windows7-64bit install

    My 3000 J 115 Windows Vista Home Premium desktop configuration is as follows:
    - an EISA area
    - 2 SATA HDD
    - 2 IDE HDD
    - 1 IDE DVD-RW drive
    I changed the BIOS boot order so that the CD/DVD drive is first. Upon rebooting, the CD/DVD drive light comes on at bootup time, but later it proceeds to boot from HDD.
    I tried removing all other HDDs from the boot device list so that the CD/DVD drive is the only boot device - then I get the msg "NTLDR is missing. Press CtrlAltDel to restart".
    The machine will boot only if the C drive HDD is on the bootable device list - the C drive is on the original disk that came with the machine (that disk also has the EISA partition). And then, it wont boot from the CD/DVD even if it is the first on the boot device list. Finally, it shows up all OS's on the OS selection screen at bootup even when the HDDs on which those OS's reside are not present in the boot list (I guess this is again because of the EISA).
    I need to boot from the CD/DVD to do a clean install of Windows7 64bit from the bootable Windows installation CD. How can I get my machine to do that? (I checked my jumper and cable settings for the IDE drives and they seem to be ok)

    I've had a similar issue trying to install Windows 7 on my mid-2010 MacBook Air, getting stuck at the Mac not recognising the USB Stick as a bootable device.
    The rEFIt Toolkit solved this for me - simply install, reboot, and your stick shows up. From there everything was smooth sailing for me

  • Windows7 64bit Client + ActiveX Viewer

    Hello,  We have been running Crystal Reports Server for several years with no issues.  We recently started deploying Windows7 64bit on several of our clients desktops.  When they try to load a web report they receive the message to install the ActiveX Viewer.  When they click install they get an error "The Crystal Reports Viewer is unable to create it's resouces".  I have read the KB articel about regiestering the dll from the worksation, but I prefer to have this happen automaticlly like on the 32bit clients.  Does anyone know away to fix this, by the way I'm running version 11.5.3.438 is there a service pack to address this issue?

    Win7 in general and win7 64bit inparticular are not supported platforms for your product version.
    You'll need to upgrade to Xi3.1 Sp3 , if you want to use Win7 clients.

  • TV display shows USB cable from apple tv and iTunes logo. Otherwise completely unresponsive! what can be done to revive apple tv?

    TV display shows USB cable from apple tv and iTunes logo.
    Otherwise completely unresponsive! what can be done to revive apple tv?

    That is telling that the Apple TV is in recovery mode and needs to be restored. This is done by connecting to iTunes via micro USB.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Maybe you are looking for

  • Got a problem with K7N2G-L

    the problem is the MB doesn't seem to be disabling the onboard video like it should when i attach an expansion card into the agp slot (using an MSI G4MX-TD8X).  i've tried everything i can think of to get the dang thing to post... or at least show it

  • Can I resize a partitioned hard drive

    I have a hard drive partitioned into 2 sections. If I delete all the files from part no 2 section can `I remove the partition? ie extend space on partition no.1 so in fact there are no partitions?

  • Glint effect question

    HI all, I have created a glint effect flash and I was wondering how I can publish it as an html with static jpg file (image map) when I try to do that through the publishing I can't see the text of the glint I only see a rectangle where the text is.

  • Swing Applet in JSP: problem with fetching data from database

    i am facing a problem while fetching data from database using Swing Applet plugged in a JSP page. // necessary import statements public class NewJApplet extends javax.swing.JApplet { private JLabel jlblNewTitle; private Vector vec; public static void

  • My desktop and screensaver options stopped functioning. I think I may have removed an app for it.

    Have iMac with Mountain Lion. Yesterday I ran a program called MacKeeper. It identified problems. I removed several apps. Now my desktop and screensaver options won't function. What can I do? Thanks.