ITunes 10.6.3.25 very slow to respond - Windows 7 64 bit

After having sworn off iTunes over 10 years ago, I just installed the latest version this weekend -- my kids gave me a Touch for Father's Day and my son assured me that iTunes had improved over the years. My experiences with it so far would indicate that is not the case.
It takes a number of minutes to synch to my iPod Touch (8Gb version) -- this was before there was even any music on it. While this is happening, the iTUnes exe is using one full core of CPU processing continually, and the program is unresponsive in Windows. After much waiting, I managed to get a small test selection of music on the device. If I play this from within iTunes, it will play, but if I then pick a different song to play, I need to again wait several minutes durig which iTunes is again unresponsive. The same wait occurs trying to exit iTunes. I have disabled auto synching, but I am still getting these ridiculous delays. This is on a fast Intel Core i7 machine, so I can only imagine how long this would take on an older machine. While this hang is occuring, there is one maxed out core, but there is no change to memory usage, so nothing is actually happening, and the program is just spinnning its wheels. (Without handling the Windows message queue properly, either.) This should not be this painful. These are small mp3 files being transferred onto a small device. These transfers and synchs should take miliseconds, not minutes..
Anyone have any suggestions? I feel like I'm back in 1995 when I try to use this program.

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

Similar Messages

ITunes 7.6, 7.7 very slow on Vista 64-bit

I installed iTunes 7.7 (iTunes64Setup.exe) on my Windows Vista Ultimate 64-bit edition. It installs successfully. It works in the sense that it does not crash and I can listen to music and sync my iPod.
It is, however, painfully slow. When I scrolls through the library, there is a noticeable delay the scroll bars and my mouse cursor. The delay worsens when I resize iTunes horizontally long way.
Is this a known issue?
Vista 64-bit users, could you tell me how fast iTunes 7.7 works on your 64-bit Vista?

Just wanted to add my 2 cents. I have the same problem and it seems to affect the playback as well (stutters & starts).

ITunes 9.1.1 (12) very slow

My wife's iMac has os 10.4 with iTunes 9.1.1 (12) on it. As more and more playlists are added, iTunes is very slow to respond and the CPU usage is going up! CPU usage is averaging 40% and the fan that cools the system is running at max speed (which is very annoying).
Have attempted to rebuild the library (975GB, music, TV shows and movies) and initially it seemed okay, but with the additional playlists being added the CPU usage is going up and iTunes is slowing down.
If anyone has a suggestion, I would greatly appreciate it. My wife wants me to trash the iMac and she would just go back to listening to CD's.
Thanks,

Many things happening here.
Is this library on an external drive? You say you have a 540GB drive but then you also say, "975GB, music, TV shows and movies)." It helps to know all the parameters.
As said before, too many playlists, especially smart playlists, slow itunes. Turn off live updating on smart playlists unless essential. Playlists of any kind make your library file larger and more to read and write.
How much of your 975 GB is music, shows, etc.? If it's 95% music in mp3s that is huge. iTunes takes longer the larger the library.
Is there a way to determine (and increase) the virtual memory?
No, and you wouldn't want to anyway. VM uses the hard drive and that is slow vs. RAM.
Also, will increasing RAM help? The iMac has 1.5GB and I can increase that to 2.5 GB.
Possibly, but some of the slow down may just be the large library and the fact that iTunes is constantly using the file. If this is being done in conjunction with an external drive that could also be slowing things down (what are the specifications on that drive?) If I run iTunes and check Activity Monitor for memory usage I see I still have plenty of free RAM but my iTunes has definitely slowed down since day 1 when I only had 2 CDs in it.
What is "slow"? It may just be the way iTunes works on your computer, your computer processor speed, the demands you are placing on it, or your computer could have other issues.
I'm not sure if this works in your scenario, but consider using multiple libraries to keep them small. Do you need all your video and music in the same library? Switch between libraries by starting iTunes with the option key held down.

After APTV and itunes upgrade on mac, streaming from itunes to Apple TV is very slow.

After APTV and itunes upgrade on mac to latest on 02/15, streaming from itunes to Apple TV is very slow. even 5 mins song takes 10-15 mins to start. Netflix/Youtube work fine on Apple TV. restarted Mac, router, modem, appletv. reset Appletv to factory setting and re-start.

Apple TV 2 does not appear in iTunes (exception being when connected via micro-usb for restore) as it has no sync capabilities.
See if this helps
http://support.apple.com/kb/TS2845

My iphone 5s is very slow to respond to my logging

My iPhone 5s is very slow to respond to my login.

Hello AAK100,
Thank you for providing the details of the issue you are experiencing with your iPhone.
The first thing I recommend is quitting and relaunching all the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting all the apps, I recommend restarting your iPhone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

My MacBook Pro suddenly became very slow, cursor responding slowely

My MacBook Pro suddenly became very slow, cursor responding slowely

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Recently Apple TV has been very slow in responding to remote

Recently Apple TV has suddenly been very slow in responding to infared remote. In some instances it responds quickly to a push of a button ( menu, select, right, left) and then it is nonresponsive to the same command. The remote is the original Apple Remote which came with Apple TV What could be causing this?

Hi there jvaini,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting the Apple Remote
http://support.apple.com/kb/ht1722
-Griff W.

Server Admin is very slow to respond

I have a brand new server that I'm doing a fresh install of OSX Snow Leopard on and I'm running into an interesting problem. For some reason, server admin is VERY slow to respond to any service changes... when I first load server admin, it takes 3 minutes to display the services. When I change a service, I get the spinning wheel in the right hand corner of the server admin pane for up to 10 minutes before I can click "save" ("save" is grayed out while the wheel on the server admin pane is spinning).
I've run OSX server from Tiger through Leopard and have never seen server admin be this slow.

You didn't need to reinstall.
I've confirmed this issue. Stop the firewall by launching the Terminal, and run:
sudo serveradmin stop ipfilter
Quit Server Admin if it's running (and unresponsive) and wait at least a couple minutes.
Re-launch SA and disable Stealth Mode for TCP/UDP.
Please submit a bug-report at
https://bugreport.apple.com
_But before you submit, please, be sure to read_:
http://www.afp548.com/article.php?story=20051102133234150

Typing on the iPad 2 very slow to respond with iOS 7

Why is typing on the iPad 2 very slow to respond with iOS 7?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.

ITunes App Store Australia download very slow

iTunes app store in Australia has had VERY slow download ALL day. Any suggestions.

rmau61 wrote:
iTunes app store in Australia has had VERY slow download ALL day. Any suggestions.
contact apple support to see what is going on -- there have been complaints about Icloud servers and mail - so hazarding a guess that they have a problem somewhere between you and them. Weather (storms) can cause an internet connection to be slow - or have to be rerouted in the system causing a traffic jam somewhere along the line. Generally - in the US I check the national weather service map and if there are storms in certain areas I give it up for the day as its just not going to connect.

Very slow bootup for windows 7 home premium on x200

hi i had recently bought the windows 7 home premium upgrade for my x200 with ocz vertex ssd. x200 model : 7459 p57. since i have install the os, i got a very slow bootup at the welcome page. anyone facing the issue or any solution? previously using the windows 7 rc edition with the ssd, there's no issue. can anyone help me?

You can probably simply download all the Windows 7 versions from the Lenovo Web site. Win 7 by itself will install enough to get you running for the most part.

CS4 apps are VERY slow to open Windows file browser with File Open or File Save As commands

We are running CS4 on Windows 7 with all available updates installed. Photoshop and the other CS4 applications are VERY slow to open a Windows file browsing window to select files when File Open or File Save As menu options are run -- it can take as long as a minute or two for the window to open. Once the window opens and a file is selected, then opening or saving the file is very quick. The location of the default directory, whether it is on a local drive or a network drive, makes no difference. Any suggestions as to what the problem might be?

Raphman02
The link that I posted earlier is off. Read this one
http://support.microsoft.com/kb/2501584. I discovered in my network that the MS Office File Validation Patch made excel crawl when opening over the network though nothing else changed. At the time I was opening Excel on Office 2003.
You can manually turn this off by editing the registry and tunring it off. Going forward I skipped the patch to keep my sanity. Not sure if this is the same as your issue, but the support article will go into detail how to either have Fix it
clear the issue or change the proper registry keys.
Hope this helps

Lightroom Develop Mode very slow in responding to commands

When I am trying to get a photo ready to print and am in the Develop window, the response time when I try to make adjustments to the phots are not acceptable. Very, very slow and almost impossible to accomplish what I need to do in order to get the photo into the print mode. I have a hang up somewhere but I am at a loss to know how to correct this problem. Any help greatly appreciated

I've got this exact same problem and I've tried a list of things to do. I've been on the internet researching this out for two days and nothing has worked. I have 3 sessions I need to get done and this slowness is unacceptable. LR used to run very smooth and fast and with in the past week its been a dog. It has to be something related in the catalog area. I have 13000 and the catalog is a mess. I don't understand the catalog one bit, I'd rather just have access to folders and upload that way instead of messing with the headache of a dang catalog.........did I say I hate the catalog?
Things I've tried with no results:
optimized catalog
moving RAW cache from external to internal drive
increasing RAW cache from 2G to 20G
preview rendering 1:1 (I really don't understand the purpose of this at all....after waiting for an hours to render 500 photos it did nothing to improve)
Moved a session of photos that I have been trying to work on from my external drive to my desktop (500 photos 10G worth) internal drive
reboot PC
reboot LR3
disabled unused startup programs
my PC is scheduled to defrag once a month
attempt to update Intel graphics driver but there was no new update to download
close all programs and run LR3 by itself
I may have failed to list something but I think thats it. I'm running Win7, Intell Duo Core 2 T6500 2.10Ghz processor, 320HD with about 70% free. I only use my HD to run programs and a external 320HD for image storage and retrieving. This particular drive has about 30% free, maybe less, but like I said before I've disconnected the drive and tried developing from my internal drive with the same results.
I'm out of things to try.........shoot to them over to me and I'll try it. I'm desperate. I'd love to dump the entire catalog and start over. Its so unorganized and I never can find what I'm looking for anyways......I hate that catalog with a passion but I love everything else about LR when its working.

ITunes 10.6.3.25 very slow to respond - Windows 7 64 bit

Similar Messages

Maybe you are looking for