Itunes 10.6 and iOS 5.1 the devices were no more recognized by itunes

Since I updated to itunes 10.6 and iOS 5.1 the devices were no more recognized by itunes (only be Win7 64bit) and the itunes 10.6 diagnose crashes the the programme

Try the link below, it solved a similar problem for me. I think the problem is the iTunes 64-bit installer. Step 5 fixed my problem. Also running Windows 7 64-bit
http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
Good luck!

Similar Messages

My playlist on the iPhone won't sync but is available in i tunes. I have itunes 10.5 and iOS 5.1.1

I discovered that when i select a playlist folder on the my iphone 4,the folders contain no songs, but i can stil play music from the song list.I tried to sync manually but nothing works.My entire playlist is available on i Tunes.Does anyone else have this problem and are there any fixes?

Hello there Harvey,
When you say that the device is not recognized in iTunes, if it is not showing in the sidebar or anywhere in iTunes then I recommend this article named iOS: Device not recognized in iTunes for Mac OS X found here http://support.apple.com/kb/ts1591.
To begin troubleshooting this issue on your iOS device, first follow the steps in the appropriate troubleshooting assistant below:
iPhone Troubleshooting Assistant
iPod touch Troubleshooting Assistant
iPad Troubleshooting Assistant
If the issue persists after following the troubleshooting assistant, continue with the steps below, testing to see if the issue is resolved after each section.
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch. iTunes 10 and later requires Mac OS X v10.5.8 or later.
Update to the latest version of iTunes and Install software updates on your Mac.
Check USB connections. iOS devices require USB 2.0 to function properly. If you are not sure if your Mac has USB 2.0 ports, refer to the computer's specifications. Disconnect other USB devices, and connect your device directly to a USB port on your Mac.
Restart your Mac.
Mac OS X v10.6.8 or earlier only: Reinstall the Apple Mobile Device Service.
Additional Information
In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.
Take care,
Sterling

Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5

Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5

Hi Gray Don,
Welcome to the Support Communities!
The article below may be able to help you with this. Follow the steps in order, but step 5 resolves the issue in most situations.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy

ITunes 10.6 and iOS 5.1 Don't WORK ON MY COMPUTER FOR MY PHONE DOESN"T SYNC!!!!

I AM TOTALLY ANGRY & P1SSED!!!! iTunes 10.6.1 BLOWS AS WELL AS iOS 5.1. NOW THE PHONE DOESN'T GET RECOGNIZED ON iTUNES OR MY WIFI NETWORK. I RESET NETWORK ON PHONE AND DID A REPAIR THROUGH CONTROL PANEL IN ON COMPUTER FOR iTUNES AND BONJOUR. AND NOW IT DON'T WANT TO SEE THE PHONE ON THE WIFI NETWORK HERE AT ALL. ONLY WAY I CAN SYNC IS PLUG PHONE INTO COMPUTER AND SYNC IT THAT WAY. NOW IF ANYBODY CAN GIVE ME ANY IDEAS TO GET THIS FIXED I WOULD APPRECIATE IT TREMENDOUSLY. THANKS IN ADVANCE FOR WHO CAN HELP ME OUT WITH THIS ISSUE. WHICH IS JUST 1 ISSUE, THE OTHER IS iTUNES STARTS UP SLOW WHEN CLICK ICON ON DESKTOP. I HAVE TRIED EVERYTHING DEAUTHORIZED COMPUTER RESET PHONE RESET NETWORK SETTINGS ETC YOU NAME I HAVE TRIED IT AND NOTHING WORKS TO CORRECT FIX THE PROBLEM ISSUE. WHAT ELSE DO I NEED TO DO OR TRY? NEXT THING I AM GONNA DO IS UNINSTALL ITUNES BONJOUR AND ALL STUFF RELATED TO APPLE AND WHAT NOT AND REBOOT COMPUTER AND REINSTALL ALL ITEMS BACK.

Here is reults of a Diagnostic Test, whle iPhone was plugged into computer. If anyone can see something as a issue, please let me know, thanks.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0037AA9C0E1D0A58
Current user is an administrator.
The current local date and time is 2012-04-02 10:38:23.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3300 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:
Description:
IP Address:
Subnet Mask:
Default Gateway:
DHCP Enabled:
DHCP Server:
Lease Obtained:
Lease Expires:
DNS Servers:
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-02 10:37:10.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.2.0),
D: ATAPI iHAS422   8, Rev 4L11
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
LSI 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Joey’s iPhone, iPhone 4S running firmware version 5.1
Serial Number:
**** Device Sync Tests ****
Sync tests completed successfully.

When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?

When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.

Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings. Be sure to turn it off.
You are confusing an itunes store account with an icloud account. You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account. (have restrictions turned off) That will disconnect the device from the account but will not delete data in icloud or other devices. Then sign in using the new ID.

OS 10.7.5, iTunes 11.0.1, and iOS 6.0.2 ... everything is updated, but iTunes won't read iPhone 5 or iPad. Suggestions?

OS 10.7.5, iTunes 11.0.1, and iOS 6.0.2 ... everything is updated, but iTunes won't read iPhone 5 or iPad as devices. Syncing was easy before recent iTunes update. Suggestions?

Are you using the correct cables. iPod cables look similar, but are not, as they are 1.1 USB cables, where your iPhone and iPad require a 2.0 USB cable.
Also, make sure you are not plugging your USB cable into a Hub or keyboard USB port, but one directly on the computer.
You may want to reset the USB ports, by resetting the SMC and PRAM
HT1411 - Apple Portables: Resetting the System Management Controller (SMC)
HT1379 About NVRAM and PRAM - http://support.apple.com/kb/HT1379.

Am unsuccessful getting my iMac iTunes library synced to my iPad and iPhone. all devices are authorized and have latest software. the device icon is not shown in my toolbar as the tutorial indicates. what next?

can not get my iMac iTunes library synced to my iPad and iPhone using USB. all devices have latest software. There is no device icon on my IMAC toolbar as indicated it should be in the support FAQs. What advise does anyone have?

Hello Luckyone1,
Thanks for using Apple Support Communities.
If your iOS devices are note being recognized in iTunes on your Mac, please follow the steps in the article linked to below.
iOS: Device not recognized in iTunes for OS X - Apple Support
Take care,
Alex H.

I just got an IMac, and when i plug my IPad in, the device is not showing up on itunes ? can anyone help me ?

i just got an IMac, and when i plug my IPad in, the device is not showing up on itunes ? can anyone help me ?
i tried many times, and it still dosent work

Take a look at this Apple article -> iOS: Device not recognized in iTunes for Windows
Is the Apple Mobile Device Service installed and running on your computer?

HT4623 I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes) I can't get it to go away or to access my ipad. Any hints?

I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes) When I do this it wants to restore my ipad, which I have already done. I can't get out of this screen. Any hints on what to do next?

Something went wrong with your update; you are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times

Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content. Can someone help?

Automatically Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content. Can someone help? The Apps seem to sync fine, just not the music, videos, podcasts, or audiobooks.

Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

I have just updated iTunes on my laptop, and now when i plug my iPhone in, the device does not show up in iTunes. I have tried multiple wires and uninstalling and re-installing iTunes. What do i do?

I've just updated my iTunes on my laptop
And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
And i still have no luck
help!

Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

Connect the device to your computer. Open iTunes. Select iPhone, iPad, or iPod in the Devices list. Click the Summary tab and select "Manually manage music and videos". Click Apply. but after that say's everything on my iPhone will be deleted

Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
than it says it'ss erase my iphone and sync with itunes library.
what should i do?

It wil only erase the music and videos. Nothing else.

TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius said it may be a hardware error, but all of the buttons and cords work. Now

iPod is stuck in recovery mode, and not recognized by iTunes.
Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

If it does not work on other computers then I agree with the Genius

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Itunes 10.6 and iOS 5.1 the devices were no more recognized by itunes

Similar Messages

Maybe you are looking for