ITunes 10.6 Windows

iTunes crashes after selecting "app store"

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if the problem has been resolved.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Similar Messages

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sail

Hello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Cant download itunes 10 using windows vista error installation of assembly policy 8.0 microsoft VC80.CRT

cant download itunes 10 using windows vista erroe about installation of assembly

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?

Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
That "itunes file from the old PC"? Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
That's on the iPod, correct? Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC? Are the songs in iTunes still playable?
This document provides the steps to transfer a complete iTunes library between two computers. See the section called External drive.
iTunes: How to move your music to a new computer - Apple Support
There are many steps, but this is a summary. (1) On the old PC, consolidate all of your iTunes data into the iTunes folder. (2) Copy this iTunes folder to the external drive. (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive). When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

Lost all Playlists in MAC iTunes AFTER Upgrading Windows iTunes to v.10.7 (via Parallels) - HELP!

I HAVE iTUNES v 10.6x installed on my Macbook Pro - been using for quite awhile without issues. All Updates to iTunes have gone just fine. I also use Parallels Desktop with Windows XP Pro installed on it and within that Windows installation on this Mac, I have installed many software programs -- all okay for over 3 years - no real issues. I also have installed iTunes in the Windows, but never really used the Preferences of iTunes to use its Advanced settings to change the location of the Library to the same location of the Mac's iTunes -- the Library is on an external HD. The use of iTunes in Windows was never really used because I never had the right location of the Library set in Preferences.
About 5 days ago, while in Windows XP, I got an Apple Software Upgrade Notice that a new version of iTunes was available for download -- Version 10.7. Not thinking about it then, I told myself that when I finished upgrading inside Windows that I would exit Windows and while in Macbook Pro's OS X 10.5.8, i just knew there would be an Apple Software Update Notice to also update my Mac's iTunes to version 10.7 also. That's what I planned to do while still in Windows. While installing the update to version 10.7 within Windows, I thought I'd try to set the proper location for the Library file using iTunes' Preferences and Advance Tab. I finished the upgrade to 10.7, went into Preferences and Advanced Tab and did just that and set the correct location on the external harddisk then tried to play songs using my Windows XP's upgraded iTunes. IT WORKED JUST FINE.
I now exited from Windows and went back to straight Macbook Pro OS X 10.5.8 and tried to check for this upgrade for iTunes from 10.6x to 10.7 by going to the Apple Website and downloaded this from there. When I then attempted to install the downloaded 10.7 (to replace/update my 10.6x) it would not install because my OS X 10.5.8 is not useable for the new 10.7. Okay, I'd just use my tried and true version 10.6x. WRONG!!!!!
When I attempted to open my iTunes on the Mac, it would open, but all my normal screen views were gone -- NO PLAYLISTS WHATSOEVER. The Music folder (the Library?) was fine but all songs had the infamous "!" MARK next to each and every song -- not playable. So, remembering the Library location setting in Preferences was the way to "reset" iTunes so the Library would be recognized and useable, I went into Preferences and reset the Library to the proper and same location as it always had been (and, where I had just previously set the Windows' iTunes to). Now the "!" marks were gone and each song in the Music Folder played just fine. BUT, NO PLAYLISTS WHATSOEVER. ALL MY ORGANIZATION EFFORTS FOR YEARS WAS GONE!!!
My thoughts are that the Windows iTunes upgrade to 10.7 changed some key iTunes files common to both operating systems on the Macbook Pro, Parallels Desktop, and Windows XP installation -- some Windows iTunes program files are kept and store in the same default location as the Mac's and on the internal hard drive of the Mac.
Because, in further researching this problem, I found that the "iTUNES LIBRARY.itl" file located on the Mac's hard drive had, in fact, been changed by the Windows iTunes upgrade to 10.7!!!!!! THOSE CHANGES "CORRUPTED" THIS FILE TO USE IN THE MAC iTUNES PROGRAM AND THE PLAYLISTS ARE GONE. I also use this software in this effort: PARALLELS DESKTOP VER 7.X, FULLY UPDATED WINDOWS XP PRO, FULLY UPDATE AS MUCH AS APPLE HAS PROVIDED TO MY OS X 10.5.8 (I CAN'T UPGRADE TO LION), AND OF COURSE iTUNES 10.6x.
THEREFORE, WHAT EXACTLY SHOULD/COULD I DO TO GET THE PLAYLISTS BACK INTO MY MAC OS X 10.5.8 iTUNES? I DON'T CARE TO USE THE WINDOWS iTUNES ANYMORE -- I'LL JUST STAY WITH MY MAC'S. PLEASE HELP!!! THANK YOU.
LARRY HAMILTON

Ok, now main problem is with Apps only.. problem is with msg. Iphone is sync with other library, do you want replace apps on this Iphone ??
I already took all my apps to the computer...
So... I need just sync Iphone with this new library and do not remove any app from Iphone...
how to do it please?

How do I install itunes on a windows 8 computer. I keep getting the message that the app cannot run on my computer.

I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.

Hi mlheidt,
If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Best,
Brett L

I have an iPhone 4 and tried to update to iOS6 but received an error message when trying to restore. The phone is no longer recognised on iTunes (using my Windows PC). I have reinstalled iTunes but this has not worked. What can I do??

I have followed the instructions on the apple support pages and still cannot get my phone to work. It continues to show the iTunes USB picture and is not recognised on my iTunes on the windows PC. When I connect the phone to my iMac it shows no data and says I can restore to factory setting. However if I do this will all my data be erased? How do I get my phone and data back? I have saved most of the photos that were on the phone but all my contact details and messages are stored and I really need to get them back! Would have limited memory on the phone when trying to update caused this problem?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

ITunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verizon 11.0.2.26 but no matter what I try it does not connect. HELP P

iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any help

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services". I don't know what this means and I do not know how to resolve it. Can you advise please?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open

I have installed iTunes on my Windows computer (XP sp2) but not in any way iTunes will start

I have installed iTunes on my Windows computer (XP pro sp2 x32) but not in any way iTunes will start when new iPad 4 is usb connected with computer
what can be wrong?

I recommend you do as LexSchellings and I are telling you to do. If you have uninstalled iTunes and the reinstalled it from Apple's website and it still does not work, you will have to contact the Apple Technical Support section for them to guide you through steps to try and get it working.
The US Contact Page is here: http://www.apple.com/contact/
The UK Contact Page is here: http://www.apple.com/uk/contact/

ITunes error 7 (windows 127) VideoToolbox.dll

I have uninstalled, reinstalled, tried installing the videotoolbox.dll file seperately, and looked up just about everything i can find but nothing matches my exact problem or fixes it. When I try to open itunes i get 2 error messages. The first reads:
"The procedure entry point kVTCompressionPropertyKey_ThrottleForBackground could not be located in the dynamic link library VideoToolbox.dll"
After I click ok I get another pop up saying:
"iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)"
Can anyone help me fix this?
Thank you
P.S. I am running Windows 7 64-bit

See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2

HT1364 All the cd's I have bought over the years, have all been uploaded into iTunes on a Windows PC. I have just bought an iMac and want to transfer my library across. What is the best way?

All the cd's I have bought over the years, have all been uploaded into iTunes on my Windows PC. I have tried just copying my iTunes folder across to my new iMac, but it doesn't recognise all of the music (but it does recognise some?). Can someone please tell me the best way to transfer my iTunes library from my PC to my iMac?
Thanks, Caroline

Copy the entire /My Music/iTunes/ folder from your PC to /Music/ on your Mac.

ITunes 10.6 Windows

Similar Messages

Maybe you are looking for