ITunes 10.6 won't recognize iTough 3rd gen

Just upgraded to OS 10.6 Snow leopard. Just upgraded iTunes from 10.5 to 10.6 and now my 3rd gen iTouch isn't recognized by iTunes. When I plug it into the computer it charges but doesn't load in iTunes. Need assistance please.

Have you tried deselecting Sync Podcasts under the Podcasts tab followed by a sync followed by reselecting Sync Podcasts and another sync?

Similar Messages

  • Itunes v11.1 won't recognize itouch 4th gen

    My itunes v11.1 is not recongnizing the itouch 4th gen that my sister just got. It's jailbroken and i want to restore it. the problem is that the unit is not opening up.help!

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    and
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • Itunes 11.3 won't recognize either of my iphones.

    iTunes 11.3 won't recognize either of my iphones.  Need help!

    Hi rickthegolfer123,
    Welcome to the Apple Support Communities!
    I know it can be frustrating when your iPhone is not recognized in iTunes. There are some good troubleshooting steps however to help you get this resolved. The steps may be different depending if you are using an Apple computer or a Windows computer so I will include both articles.
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • My iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    my iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    Turn it off by holding home+ power button untill the screen goes black ( as soon as it goes black, release the buttons).. This might take some practice , so dont worry if on the first try your phone reboots and goes to itunes screen again.
    Now, with your phone powered off, enter DFU mode:
    Method 1)
    Attach the phone to the pc
    Turn the phone off
    Hold power and home together for *exactly* 10 seconds
    Release power but keep holding home until the pc beeps as a USB device is recognized.
    Whilist in dfu mode, itunes will recognize the device and it will ask you if you wish to restore it. Simply click restore, and the restoring proces will begin.
    This will hopefully fix your iphone.
    Cheers

  • TS3540 iTunes and iPhoto won't recognize my iPhone when plugged into my mac.

    iTunes and iPhoto won't recognize my iPhone 4S, or my wife's iPhone 4 when pluged into my MAC.  I am running OSX v10.5.8, and both iPhones have the latest version of iOS.  I tried a few of the other trouble shooting tips from the community, but nothing seems to work.
    Any suggestions?  Thanks.
    -CoachJB54

    I tried that and iTunes and iPhoto still won't recognize the device.  Any other suggestions?
    Thanks.
    -CoachJB54

  • IPhone5c not charging. Brand new. Shows that it should be connected to iTunes but laptop won't recognize it's plugged in.

    IPhone5c not charging. Brand new. Shows that it should be connected to iTunes but laptop won't recognize it's plugged in. Any ideas what I can do to fix it??

    Try to connect in recovery mode. explained in this article:
    iOS: Unable to update or restore

  • ITunes & iPhoto suddenly won't recognize my iPhone 4S

    I've made some purchases recently both in and out of iTunes, so I decided I wanted to download them to my phone this morning. I plugged in my iPhone 4S (v7.1.2) and opened iTunes (v11.3), but iTunes wouldn't recognize the phone, even after I rebooted the phone, checked the cable, rebooted and reinstalled iTunes, etc.
    My phone is charging, so my MacBook (which is running Mavericks OS 10.9.4) is definitely connecting to it.
    But when I tried iPhoto, it won't recognize my phone, either. I rechecked the cable. It seems to be fine. I even tried a new cable. No dice.
    What's going on? Anyone else experience this? It's the first time since I first starting using iPhones in 2008 that I've ever had this kind of problem.
    Thanks in advance!

    What do you mean OS X won't allow you to uninstall iTunes?
    Very rarely is needing to uninstall iTunes on a Mac before reinstalling required as is required with the spagetti code involved with Windoze.
    http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US

  • The latest version of itunes -- just installed -- won't recognize my ipod touch 4th gen.  What's up?

    I just installed itunes version 10.5.2.11, and now it won't recognize my ipod touch 4th gen.  Running on windows 7, very fast desktop.  Previously no prolems with itunes or the ipod.  The computer does recognize the ipod and names it correctly in My Computer.  Any suggestions to wake up itunes and discover the ipod?

    See http://support.apple.com/kb/TS1591.

  • New version itunes (Dec 2012) won't recognize my ipod touch.

    Since installing new itunes on computer, the program won't recognize my ipod.  It does recognize my daughter's iphone.  I've gone through several troubleshooting lists, restarting devices and doing everything recommended.  I did a tutorial to help me recognize the new features and the one that's supposed to be there for my device just isn't.
    Help?

    I've had the same problem. Go in and unplug all devices.Go to Control panel> Uninstall programs> Uninstall all programs accotiated with Mac ****If you are Windows**** (Itunes,Itunes update,Ipod touble shoot). Just go into list a separt by Developer and click on each and uninstall each by apple/ Macintosh, what ever yours says. Restart Download the newest version of itunes then. It should work.
    P.S. Where are you from? ( What state?)

  • Ipod said it needs restored but Itunes or windows won't recognize

    I have an 80 gb classic and it said one day (after being fully charged) that it needed to be restored. So I plug it in and Itunes won't recognize it and windows shows it as a removeable disk but there's no info there either. I have the latest version of Itunes and have tried everything. I plugged my wifes 80 gb in and it syncs fine. I'm just hoping I don't have to get a new one. Any ideas would be helpful, thanks.

    hello there - I have a 160gb ipod classic and my itunes does not recognize my ipod at all and suddenley there is abou 100gb of "other" that just seems to of appeared since last synch
    can any one help
    i cannot restore because it does not recognize the ipod. my ipod shuffle is okay
    thanks

  • Itunes for mac won't recognize ipod but iTunes on parallels will

    Just upgraded itunes to 10.5 and purchased a new ipod classic (160gb). All my music is on my old macbook, but itunes won't recognize that the ipod is attached. Finder will, but iTunes won't. However, when I run iTunes in parallels desktop on the same mac, it recognizes the iPod and asks to sync. How do I get the mac itunes to recognize the ipod?

    Sorry for the late response. I realised my notifications are off. I've tried that. All my software is up to date, setting for wifi sync are all checked off. I spent 1 hour on the phone with Apple with no results. Most threads are about Windows PC. I run a a MacBook. Variables could be my Linksys router but i/ve played with the firewall settings and nothing. I have a range extender but all devices are using the same network. Any final ideas?

  • Computer says iPod is there, but iTunes and Windows won't recognize it

    I've had a 60GB ipod photo for about 4 years and it has served me well. This morning the iPod froze in the middle of a song. I hit reset, and it came back blank - all the files were gone. When I got to work and hooked it up to my computer, iTunes and Windows can't recognize it, but I can find it in device manager - which means I couldn't do restore.
    I hit reset a few more times, changed USB ports and, somewhat miraculously, the iPod came back, complete with all files. On the way home from work it happened again and I haven't been so lucky.
    I forced it into disk mode and iTunes recognized it, but told me it was corrupt. I also received a computer sound card error - my sound card was busy, and an error stating that audio/video playback could be limited. I tried restore, but I received the unknown error. I'm using the latest version of iTunes and I'm all out of ideas.
    Any suggestions or should I put this iPod to rest and save up to buy a new one?
    Thanks

    The most likely problem is that the hard drive in the iPod is becoming unreliable. It may be experiencing sticktion, which is friction that makes the spinning platter stick and the motor cannot get it spinning. The iPod is regularly spinning the hard drive up, to cache songs into memory, and then spinning it down, to save power. If the drive was not able to spin up when commanded (in the middle of a song), the iPod would seem to lock up. Later, bumping the iPod may make the hard drive spin again, so it seems to work again, at least for a while.
    If this the the problem, the only way to fix it would be to replace the hard drive inside.
    You might try reformatting the iPod using Windows, if you can get it to appear in a My Computer or Windows Explorer window. Use a full format instead of a quick format. If that process competes successfully, run iTunes and try using Restore again to install and initialize the iPod's software.
    If formatting does not compete successfully, it may be time for that new iPod.
    You can do some experimenting on the old iPod, if you're into such things. I have successfully installed a compact flash card (through an adapter), inside a 4th gen iPod as a replacement for the hard drive. It is only 4GB at the moment, but CF cards up to 16GB are getting relatively cheap, so I might get one of those and start using by old broken 4G iPod again, +now with shock-resistant energy-saving flash-based storage+.

  • ITunes 9.1 won't recognize my iPod.

    I only use my classic iPod for mp3 music files ... no artwork, pictures, TV, radio, or ANYTHING other than my music. It worked fine for 3 years, but now, I plug-in my iPod and nothing happens. iTunes doesn't see it. I've taken all my hardware to an APPLE store and verified that eveything works well, but iTunes still won't see it. What a piece of crap this has turned out to be. I tried older versions of iTunes, but they won't execute because a file "iTunes Library.itl" was created by an updated version. Don't know what to do next. As a programmer, our top priority was to make new versions of our software BACKWARD COMPATIBLE ... no excuses, it HAD to work or else. Version 9 doesn't work backward.

    I had the same problem. After reading some other posts I found the solution for now is removing itunes 9 and reinstalling iTunes 8.2.1 for G3. Open applications, remove the itunes app, also remove it from your dock. Open Finder, click Music, open itunes folder and move album artwork folder and itunes music folder to your desktop, delete all other files, librarygenius.itdb, library extras.itdb, music library.xml, and itunes library by moving them to trash and emptying. Don't worry once you download 8.2.1 for G3, http://support.apple.com/kb/DL857, and install it they will reappear. Reinstall 8.2.1, when install is done, open Itunes, go to Preferences, click the Advanced tab and uncheck "copy files when adding to itunes music folder". Now, open Music in Finder, open itunes and take your album artwork folder and itunes music folder from your desktop and place them back in the itunes folder in Music. Go to itunes, file, add to library and add the itunes music folder and your music will upload without creating duplicates. Once the adding is complete, lastly connect your Ipod and it should appear. Hopefully, this isn't difficult for you to understand but it worked for me.
    Just a side note and this might not be necessary but I did it anyway; I opened up Finder and searched for any file that was connected to itunes and removed them all except for my artwork folder and itunes music folder. I tried uninstalling 9 and reinstalling 8.2.1 the way it is suggested in previous post and after I completed the process and I went to open up itunes, I got the error message "could not open because itunes was installed with a newer version". That is when I decided I will clean my mac of any files related to itunes, except for artwork and music, download 8.2.1, do a completely new install. Good luck.

  • My laptop won't recognize my 7th gen nano

    My HP laptop (3 months old/Windows 8.1) and won't recognize my brand new 7th generation ipod nano...it says my "USB device not recognized"....says it malfunctioned and windows doesn't recognize....
    Any help appreciated....thanks

    What version of iTunes do you have installed on your PC?
    Allan

  • Updating iTunes to 11.0.4, Will my 3rd gen iPod touch work fine on it with version 4.3.1

    Well I received a free iPhone 4 but to use it with my iTunes I need to update iTunes to 11.0.4.  Was just wondering if I would have any problems using my 3rd gen iPod touch with 4.3.1 on the newest iTunes.  Thanks in advance.

    You should have no problems.

Maybe you are looking for

  • Base Unit Of Measurment in Material

    Dear Experts,     Base UoM in material master is in Metric Tonne "MT",While Creating the BOM of the Material My Base qunatity is also in MT by default but I want to change Base Uom to in KiloLiter "KL".But system is not allowing to change. In system

  • How Do you add Your APP to XP windows system in control panel??.

    Hi, Is there a way to make your APP be part of XP windows? to go or have it list in Add/Remove programs in control panel and to show up and stay in the Taskbar( next to the time on dask top) and how do y ou add to Rigister in XP windows. Other words,

  • Troulbe in measurement quadrature encoder with 6601.

    Hi, We are trying to measure position with 6601. The frequency of quadrature encoder is from 100Hz to 8MHz. Now, we connet the A,B and Z channel directly to counter . Using the example in CVI, we change the filter to 100ns and use x4 mode. It works p

  • Ruby code for sql queries

    Hello everybody, First off, let me apologize if my inquiry does not belong on this forum. I am confident however, that someone here has had experience with this since Oracle and ruby on rails/ruby are used frequently. My fingers are crossed, here's i

  • Basis Parameters for CRM

    Hi, are there any performance related / recommended parameters for CRM 4 systems? Can't find a specific note from SAP like is the case with BW and R/3. Many thanks, AB