ITunes 10 (64bit on Windows 7) reporting wrong capacity

After upgrading to iTunes 10 64-bit, the reported storage of Video and therefore also the amount of free storage is incorrect.
it seems that a bunch of video files are 'missed' somehow.
Did anyone encounter this behavior?

Many thanks.
That's consistent with an application (other than QuickTime itself) having dropped old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Similar Messages

  • Download Itunes 10 64bit with Windows 7 "Freezes"

    I have attempted downloading Itunes 10 64bit on my new ASUS PC with Windows 7. It starts to download then "Freezes" at about 20-25mbs. I am using agood broadband connection. Is the software available on anyother media ie: CD rom?

    I have iTunes 10.2.1 running on ASUS Win7 64 bit.
    After the upgrade to iTunes 10.2.1 I had major problems syncing. I had not had issues previously. I keep my iPhone locked but previously I could just plug it in and iTunes would start and the iPhone would sync. Now I have had many error messages, such as:
    A folder was specified instead of a file.
    A duplicate file name was specified.
    An internal device error occurred.
    The required file cannot be found.
    An unknown error occurred (0xE8004006)
    There are too many files open currently.
    iTunes could not back up the iPhone "myphone" because the backup session failed.
    A connection could not be established to the iPhone.
    Not all errors occurred at once, but during the many hours I worked on the issues. My troubleshooting went in this order:
    shut down iPhone and try again to resync -- still received connect errors.
    reset iPhone (hold down top button and home button about 10 seconds) -- still errors.
    deauthorize and reauthorize my computer -- still issues.
    uninstall all apple programs in an order specified by apple and download and install the latest version of iTunes (latest was already installed, but reinstalled it) -- still errors.
    Then I saw an entry by someone about unlocking the iPhone. I did this before connecting the iPhone to the computer and it connected. However, I still had other errors.
    I configured iTunes to not sync with Outlook email, calendar, notes, etc. Only synced with Contacts. I also unchecked many of the apps to be synced. I finally got it to back up and complete a sync (according to the iTunes message). However, my Outlook contacts did not sync properly. That is, a new Outlook entry did not come across. Maybe other issues but not sure yet.
    Also, the iTunes sync is very, very slow and iTunes appears to freeze during the sync. That is, the iTunes window cannot be repositioned and if I open another window and close/minimize it, the image remains on top of the iTunes window and does not clear.
    Bottom line, it appears to sync now but with limited results. My apps now work after the second somewhat successful sync whereas after the first sync an app would open and then immediately close (except for the bundle of apps that came with the iPhone). I am not satisfied and all is not well. I am still experimenting and trying to regain all functionality.

  • ITunes install failure on Windows desktop report missing MSVCR80.dll

    I need iTunes in order to manage my iPad and iPhone4. After download en installing iTunes 11.1.14 on my Windows 7 Ultimate desktop I got a message iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)  and report of missing MSVCR80.dll. I tried several times but got same fallure report. Could anybody help me to solve this problem?

    How To Fix Msvcr80.dll Not Found or Missing Errors
    http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom 

  • ITunes reports wrong capacity

    I have 69 MP3 songs in my library. Average size is 4 Mbytes. (Confirmed).
    ITunes reports 69 songs, 4.2 hours, 1,014 Mbytes.
    That's about four times my actual usage.
    I have no photos or other material stored in iTunes or on my iPod nano.
    Anyone have an explanation? Or how to resolve the problem?
    TIA

    I have a 40gig Ipod and when i connect to my computer at work, which has itunes ver 7, it sees my ipod as having 110 gig capacity and is unable to see any songs.
    with those symptoms, it's also worth checking on the possibility from the following troubleshooting document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • I got a problem on installing iTune-64bit on WIndows 7, error message says the folder "itunes" is on a locked disk or you do not have write permissions for this folder.

    I got a problem on running the iTune 64bit on Windows 7, error message says " the folder "itunes" is on a locked disk or your do not have write permission for this folder.    Any one ran into this problem ?  
    It worked before.

    Open Disk Utility via Spotlight or in the Applications folder stored within the Utilities folder. Close all applications and 3rd party software and choose "Repair Disk Permissions." Reboot the computer when finished, and test to see if the issue is resolved.

  • Itunes wont run in 64bit on windows 7

    hi guys
    have a problem tried connecting myiphone 4s on windows 7 64bit it keeps saying
    this iphone can not be used because the required software is not installed.
    i have the 64bit version of itunes loaded on my windows 7 pc

    Bump
    Yeah its strange how making an update (which would be supposed to improve) ruins this program.
    Again if anyone have an answer it'd be really nice. And yes I would also only expect it to do this on large and requiring applications but no its not because of my specs (and besides it worked in the previous version).

  • I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

    I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Itunes doesnt start in Windows 7 64bit pc

    ITunes doesnt start in Windows 7 64bit pc. I have Tried to reinstall again for so many times. Reinstall quick time player so many times. ITunes never starts. However in task manager always there is iTunes process running in the iTunes.exe.*32 name.
    Please help me to fix this issue.
    Thanks,
    Ashunandha

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Itune 8.2 for windows xp 64bit

    hi
    Why isnt there an install for itunes that works for windows xp 64 bit users, this really ****** me off i paid alot of money for my iphone but i cant update it or put music on it because they dont have a 64bit xp install please read this and make an install as soon as possible because this is just getting redicilious.
    kind regards
    Helix

    This is a user to user forum so it is unlikely that anyone from Apple will see your post.
    You can leave feedback here:
    http://www.apple.com/feedback/itunesapp.html
    There may be ways round the XP 64 bit issue, here is one link, there may be others:
    http://yukichigai.googlepages.com/iphonex64

  • My iphone (3 GS 8GB)doesn't sycron my calender with itunes (10.3.6) (windows 7  64bit) Outlook 2010 (64bit)

    My Iphone 3 GS (8GB) didn't sycron my calender from Outlook 2010 (64 bit). Itunes 10.6.3. Windows 7 Pro (64bit).
    Itunes started and started the Syncro, but than stopped without Error?!
    I always have an Ipad 1 sycron with another PC. Itunes 10.6.3 Windows 7 (32bit).
    Same Error.

    Peter Hah
    After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
    Look out for "japiohelp".
    In short:
    a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
    b) enter "netsh winsock reset" and pres enter
    c) reboot the computer
    and Bob's your uncle.
    P.

  • Iphone 3gs not recognized by iTunes 10.3.1, Windows 7 64bit

    Iphone 3gs, 4.3.2
    iTunes 10.3.1
    Windows 7, 64-bit
    Ever since iTunes updated I am unable to sync my iphone 3gs.  I have tried the following steps:
    -Uninstalling all iTunes and related software (per apple support steps), restarting, reinstalling all itunes software.  Did not work.
    -Trying several different USB cables, did not work.
    -Tried all USB ports on my computer, did not work.
    -Restarting phone/computer, did not work.
    -Turning off antivirus software (Avast) and firewall (ZoneAlarm), did not work.
    I tried syncing with my friends computer (iTunes 10.3.1 and Windows Vista), and it worked!  Unfortunately none of my music is on that computer.
    Next, I came across an article and tried the advice listed (install ifunbox on pc, delete itunes.db and itunes.cdb files on Iphone).  This allowed my iphone to be recognized by iTunes.  It began to sync, and gave me the following error: Unable to sync because the disk is not available.
    I unplugged the phone and plugged it back in, it began to sync again.  This time it went through all of the aps succesfully and got about halfway throught the music portion, and then iTunes froze.  I restarted both systems and this happened the last 5 or 6 times...iTunes freezes during the music sync portion.
    One other interesting note...in iTunes, the space claim bar (colored bar on bottom of sync screen) shows that there should be about 5 GB of music on my iphone, however the ipod app on the iphone shows no music.
    Ughh sorry for the long post I am so frustrated right now.

    Nope, haven't been able to fix it.  I was able to get some songs to sync by 'manually managing songs' however the songs were all corrupt.  They either wouldn't play, or they would start in the middle of the song, and the beginning of the song would somehow be spliced in to the middle of the song!
    So frustrating.  I can't get apps to sync either.
    At this point I am not even going to try syncing my phone until a new iOS or iTunes comes out.
    For now I have resorted to jaibreaking so that I can at least have a little fun with it

  • When I installed iTunes 11 on a windows 8 system I get the music, but the screen dosn't have te library on the left.  The left side of iTunes is the name.  I got the songs by using a external hard drive.  What have I done wrong?

    When I installed iTunes 11 on a Windows 8 system the installation did not seem to work correctly.  There is no sidebar and no ribbon w/ File, Edit, etc.  I tried to use an external hard drive to move from an older computer using XP to the new one w/ Wdw 8.  I thought if I deleted iTunes from the Wdw 8, I could reload it. Apparently I did not delete the music files because they appeared in the format I complained about, no side bar or ribbon.  Can anyone walk me through the process of deleting everything and reinstalling?  I am not very computer savy so a step by step would really be appreciated.
    Thank you,

    ctrl B - Show menus
    ctrl S - Show sidebar

  • Weird look for Itunes 8.1 64bit on windows 7 RC.

    Hi there.
    I have this weird problem with my itunes on the new windows 7.
    Its look like this.
    http://img43.imageshack.us/img43/2453/itunesw.jpg
    I did not have this problem before with windows 7, i used the beta before RC and there did it work, i have the newest graphic driver from nvidia to my graphic card.
    can anyone tell me if it is a problem with itunes or the drivers in windows 7?

    oka, i did ask the same question somewhere else. And got this.
    Additional bugs found so far also include the visualizer and new genius features. It appears at least for some people that the iTunes visualizer does not seem to be working properly in iTunes 8.1. When you enable the Classic visualizer and start it up, it will stick in one mode and not change automatically. Usually this feature can be enabled or disabled by pressing the M key to toggle between automatic and frozen modes for the display. However, this doesn't seem to be working anymore. You can still switch the view and colors by pressing the Q, W, A, S, Z, and X keys to toggle between various settings for the visualizer, but it seems this bug will have to be addressed by Apple in another update. Deleting the iTunes preference files does not help this issue, and new user accounts are also affected.

  • I have problems when downloading itunes 11 (i have windows 64bits), i have problems when downloading itunes 11 (i have windows 64bits)

    i have this message.
    please help

    Hi WillHunt112,
    Welcome to Apple Support Communities.
    You may find this article helpful for troubleshooting your iTunes installation:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Best,
    Jeremy

  • Installing Forms 11g 64bit on Windows Server 2008 64bit

    Hi,
    we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
    - installed JDK 64bit
    - installed WLS1032-generic
    - started installation of Forms/Reports
    Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
    Info in Log-File :
    =========================================================
    oracle.as.provisioning.util.ConfigException:
    Fehler beim Starten der Domain.
    Cause:
    Zeitüberschreitung beim Starten von Admin_Server.
    Action:
    Weitere Informationen finden Sie in den Logs.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    [2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    ================================================
    Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
    Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
    Any idea or help is appreciated.
    Thanks,
    Mark

    FYI,
    This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
    =================================
    1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
    2) Roll back the change so the System Path contains again the directory path with parenthesis
    3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
    if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
    4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
    5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
    ==================================
    Thanks for your replies,
    Mark

Maybe you are looking for