ITunes 10.7 can not eject my ipod nano 4
When I bought iPhone5, I update my iTunes to 10.7.21 to identify iPhone5.
But the new version iTunes can not eject my ipod nano 4 normally.
When I tried to eject iPod nano 4, the "usb mass message is uninstalled" message shows, bu the ipod nano 4 still existed in iTunes.
Then my Windows 7 system can not shut down successfully.
Can you fix this bug right now?
I'm having the same problem, including it not syncing my playlists. Also, I have the iBooks app installed and it won't sync my books?? I paid for those and thyey show up in my iTunes, just not on my touch.
Similar Messages
-
I can not eject my ipod as the device icon no longer shows up
I can not eject my ipod from Itunes as the device icon no longer shows up in Itunes. I looked on line but none of the solutions were possible to follow as the various options indicated just weren't there!
Hello scheherazada,
Thank you for using Apple Support Communities.
Here is an article for you to start with your troubleshooting to get your iPod recognized.
iPod: Appears in Windows but not in iTunes - Apple Support
Regards,
Jeff D. -
my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I can not update my ipod nano 2nd. Please held me...
I can not update my ipod nano 2nd. Please held me...
Try the 5 "R's" here > Apple - Support - iPod - iPod nano (2nd generation) Troubleshooting
-
I can not eject my ipod from itunes
I just move from ipod photo to a new ipod video but after synchronizing with Itunes and try to eject it there is a message display that says that the Ipod can not be ejected because it is been used by other application. I hope someone can help me with this
ThanksThis happened to me today. Are you using the iPod as a hard drive? If you are, then maybe there's something on your iPod that is open. You can't eject iPod if there's something on it that's open.
-
What is the oldest version of iTunes that i can use with my ipod nano 7th gen
I am planning on buying an older computer (uesd) because it is ceaper. i know that the newer the ipod, the newer the itunes version has to be. also the newer the itunes version is, the newer the computer has to be as older computers become too out of date for the new versions of itunes. i am also wanting to purchase a 7th gen nano. so pretty much i need to know how far back in the itunes timeline i can go, while still being compatible with my nano.
10.7
-
I can not turn on my Ipod Nano which is not used for a long time, Please help me how can i deal with it. It a must to bring them to Apple Store or there are tricks to fix it?
Thanh you very muchYes I did it, I followed all instructions on ipod user guide in all issues that said.
The only way to turn on my ipod is connecting the usb cord to the energy and logo appears with an old date 1970. Apple support told me to restore my ipod nano, if the problem continues i must go to repare my apple. -
Itunes and windows xp not finding my ipod nano..anyone know how to fix it?
I got my ipod nano for xmas, and was really pleased with it. But 3 days on, the computer couldnt find it in my computer OR my devices.
Then itunes failed to find it. Im now totally stuck, i have tried changing USB ports and basics like that.. but it hasnt worked. Does anyone know how to fix this?
Please get in touch if you do know how to solve this, as im normally pretty good with technology, but this one has totally stumped me!!
Thanks
xx--Tasha--xx
Emachines Windows XPI got my ipod nano for xmas, and was really pleased
with it. But 3 days on, the computer couldnt find it
in my computer OR my devices.
Then itunes failed to find it. Im now totally stuck,
i have tried changing USB ports and basics like
that.. but it hasnt worked. Does anyone know how to
fix this?
Please get in touch if you do know how to solve this,
as im normally pretty good with technology, but this
one has totally stumped me!!
Thanks
xx--Tasha--xx
Emachines
Windows XP
I had this same problem. I was reading another discussion that had this problem as well and they suggested unplugging your printer. I have a Lexmark printer connected through USB. I unplugged the printer and my ipod has worked like a charm. Strange! -
ITunes says it can not sync my Ipod Classic
I have an 80 gb Ipod classic ( in great condition! ) that I have used over the past year with iTunes. I have a acurrent version of iTunes. I am trying to add more tracks and when I plug it in, it says that my ipod is corrupt and may need to be reset. It attempts to connect and downlaod new software and it kicks it out and says it is not possible. What can I do??
Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.
-
iPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar how do i find it again?.....Help!
You can use iTunes, connect iPod Touch to computer iTunes.
Select iPod Touch in iTunes under DEVICES (left panel)
Select Books tab (right panel near the top)
Deselect those books that you have read
Click Sync button (bottom right)
Have a read to get up to speed using iPod Touch
iPod touch User Guide (For iOS 5.0 Software) -
I can't sync my ipod nano with the new version of itunes that I downloaded as the old version was not working. The response I get is that" it can't sync due to my old music library which I still have on my ipod, can someone help with this, Thanks Peter
See Recover your iTunes library from your iPod or iOS device.
tt2 -
What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work
Have you seen this article?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
B-rock -
I am trying to get some advice as to why my Ipod will not completely sync since I updated Itunes. Itunes keeps telling me it can not sync my Ipod due to a duplicate file name? It will sync some of my songs but not all of them. Any thoughts?
Most likely the iPod filesystem is corrupted, during a partial sync, that freeze due to a timeout.
In My Computer, select the iPod, right click Properties->Tools->Check Now
tick both Fix filesystem and scan.for bad sectors.
This will fix the duplicate name error.
Good Luck! -
Can not synchronise my ipod with itunes. the required medium can not be found
Can not synchronise my ipod with itunes. I receive the message the required medium can not be found
Is it along the lines of the "required disk cannot be found?" What OS are you using and are you running the latest version of iTunes? I assume you have tried multiple USB ports as well as tried using a different USB sync cable to rule out a damaged/faulty cable?
Do you have any other USB devices plugged in while you try to sync your iPod?
B-rock
Maybe you are looking for
-
Problem with vhba and dynamic vnic placement
Hello all, I have a problem with vnic/vhba placement policies on an UCS-B: When a configure a Service Profile, evrything is good: - I use a "specify manualy" vnic/vhba placement policy and can create this configuration: - vhba 0 : Order 1 - vhba 1 :
-
What program should I use? And how much storage would I need for a 3 hour film?
-
Cant find PS Extended CS6 in Download assistant?
I cant find it anywhere in the download assistant and don't know why not. I am not to savvy with tech specs and dont know what is preventing me from downloading it. Pleas help me. I have an ACER ASPIRE 3830TG TIMELINE X 13.3". Here are some specs: W
-
CS3 Copy and Paste objects - changing ID names
Hi all, That subject doesn't describe things as accurately as I'd like. But here's the behavior my new CS3 is doing that I'd like to stop if possible. If I have an object (Div tag or whatver.., maybe an entire set of nested tables 3 nests deep). If,
-
Need a SQL query(Pls Its urgent)
Hi, I want a SQL query for the foll.. Details r below.. Table AFPFTRAN BU TRansactiondate Amt 13202 10-04-05 10,000 13203 11-05-05 20,000 13202 20-04-05 5,000 Table AFGENCOD BU Clerk Name Clerk Code 13202 Amit TFBG 13203 Anand TFMG I want a query to