Itunes 10.7 windows installation issue
I am having trouble updating my itunes to 10.7. I have windows 7 and have all thesystem requirements to install/use 10.7 but I keep having an error message appearing meaning I cannot install it. Anyone else having similar issues/help me resolve this?
Thanks!
Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down?
Similar Messages
-
Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5
Hi all
After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
error 1719 Windows installer issue.
I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
Dave
DJHHi Lenora
See below
Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
03-19-2013,17:33:38 : CSetupApp::ScanXML
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
03-19-2013,17:33:38 : MSI Version = 3.1
03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : System Central Processor = 64
03-19-2013,17:33:38 : Product Type = SETUP_BEX64
03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Product Version = 12.5
03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Equal PID
03-19-2013,17:33:38 : Product version: 12.5.2213
03-19-2013,17:33:38 : StartBESequence
03-19-2013,17:33:38 : Executing BE_PreCheckInstall
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing StartBESequence
03-19-2013,17:33:38 : Pulling user data from the MSI
03-19-2013,17:33:38 : Upgrade state set to 0
03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
03-19-2013,17:33:38 : MSI processing complete
03-19-2013,17:33:38 : Pulling user data from the command line
03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
03-19-2013,17:33:38 : After check for parameter file exists.
03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
03-19-2013,17:33:38 : After Check for INSTALL_MODE.
03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
03-19-2013,17:33:38 : Ignoring the TSM switch.
03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
03-19-2013,17:33:38 : Not in Maintenance mode
03-19-2013,17:33:38 : Getting the Silent Params.
03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
03-19-2013,17:33:38 : List of switches set follows:
03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
03-19-2013,17:33:38 : /SNO: = 0930292112010690
03-19-2013,17:33:38 : /USER: = backup
03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
03-19-2013,17:33:38 : /PASS: = ********
03-19-2013,17:33:38 : /TS:
03-19-2013,17:33:38 : /TD: = ALL
03-19-2013,17:33:38 : /DOCS:
03-19-2013,17:33:38 : /LOADER:
03-19-2013,17:33:38 : /AOFO:
03-19-2013,17:33:38 : /EXCH:
03-19-2013,17:33:38 : /SQL:
03-19-2013,17:33:38 : /NTA:
03-19-2013,17:33:38 : /RAULUS:
03-19-2013,17:33:38 : /DBSERVER:
03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
03-19-2013,17:33:38 : /BACKUPDATA: = 0
03-19-2013,17:33:38 : /MAC:
03-19-2013,17:33:38 : Command line processing complete
03-19-2013,17:33:38 : Install set to run in UI mode
03-19-2013,17:33:38 : CDlgPushWelcome::Pass
03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
03-19-2013,17:33:43 : Validating license data
03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:33:44 : Connected to SQL Server.
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:05 : After Check for Remote_Install.
03-19-2013,17:34:05 : After Check for RA_INSTALL.
03-19-2013,17:34:07 : Validating serialization data
03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
03-19-2013,17:34:07 : After Check for INSTALL_MODE.
03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:34:07 : On Init of CDlgChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
03-19-2013,17:34:12 : Validating Local Options Data
03-19-2013,17:34:13 : Validating service account data
03-19-2013,17:34:13 : CDlgSSO Pass Function.
03-19-2013,17:34:13 : After Check for INSTALL_MODE.
03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : Validating DlgChooseDBServer data
03-19-2013,17:34:20 : Drive C: Required: 1102 MB Available: 37138 MB
03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:20 : CDlgCAS Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : CDlgClone Pass Function.
03-19-2013,17:34:20 : CDlgClone not passed.
03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : Install Summary XML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
03-19-2013,17:34:20 : Install Summary XSL File:
03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
03-19-2013,17:34:20 : Install Summary HTML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
03-19-2013,17:34:20 : Not Quickstart Edition
03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
computer. The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:27 : Executing InstallLiveUpdate.
03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Vista or Longhorn server. Not installing .NET Frameworks.
03-19-2013,17:34:40 : .NET Framework was detected. Skipping install.
03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:34:41 : m_bUseNativeClient = 1
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
03-19-2013,17:34:41 : SQL Server version 9
03-19-2013,17:34:41 : SQL version returned: 9
03-19-2013,17:34:41 : Executing SQL_GetServicePack.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
03-19-2013,17:34:45 : V-225-53: ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601. ***To search for information about this error, click
here
03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
03-19-2013,17:34:45 : Failed to install third party products.
03-19-2013,17:37:25 : Validating install complete
03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:37:25 : Removed files:
03-19-2013,17:37:25 : ERROR: Installation failed with error 1603.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:41:16 : Windows Operating System Version: 6.1
03-19-2013,17:41:16 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:41:18 : Executing managed _Setup:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:41:18 : Loading XML from:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:41:19 : Launching UI Install
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:19 : m_bUseNativeClient = 1
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:41:20 : CopySupportFiles
03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:41:28 : Typical install value is set to : True
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:43:04 : Install is not executing as the service account.
03-19-2013,17:43:04 : Successfully Logged on as service account.
03-19-2013,17:43:04 : Successfully impersonated service account.
03-19-2013,17:43:04 : EUserName value successfully written to the registry.
03-19-2013,17:43:04 : EPassword value successfully written to the registry.
03-19-2013,17:43:04 : EDomain value successfully written to the registry.
03-19-2013,17:43:09 : There were no remote computers selected for install
03-19-2013,17:43:09 : m_bUseNativeClient = 1
03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:43:10 : Terminal Services enabled.
03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:43:11 : Executing InstallLiveUpdate.
03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:36 : Starting Install
03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:44:36 : Discovered Total Actions: 115
03-19-2013,17:44:36 : The return code from the MSI is: 1601
03-19-2013,17:44:36 : Cleaning up the symc status key
03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:44:36 : Clean up Symantec installer keys.
03-19-2013,17:44:37 : Terminal Services enabled.
03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:45:28 : Gathering Telemetry items
03-19-2013,17:45:28 : Failed to start the management service
03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,17:45:28 : Sending Telemetry to Symantec
03-19-2013,17:45:28 : Transmit Telemetry initialized.
03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,17:56:31 : Windows Operating System Version: 6.1
03-19-2013,17:56:31 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:56:33 : Executing managed _Setup:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:56:33 : Loading XML from:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:56:34 : Launching UI Install
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : m_bUseNativeClient = 1
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:56:35 : CopySupportFiles
03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:56:49 : Typical install value is set to : True
03-19-2013,17:56:50 : Executing SQL_GetServicePack.
03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : Executing SQL_GetServicePack.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:57:37 : m_bUseNativeClient = 1
03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:58:41 : Install is not executing as the service account.
03-19-2013,17:58:41 : Successfully Logged on as service account.
03-19-2013,17:58:41 : Successfully impersonated service account.
03-19-2013,17:58:41 : EUserName value successfully written to the registry.
03-19-2013,17:58:41 : EPassword value successfully written to the registry.
03-19-2013,17:58:41 : EDomain value successfully written to the registry.
03-19-2013,17:58:51 : There were no remote computers selected for install
03-19-2013,17:58:51 : m_bUseNativeClient = 1
03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:58:52 : Terminal Services enabled.
03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:58:54 : Executing InstallLiveUpdate.
03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Starting Install
03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:59:08 : Discovered Total Actions: 115
03-19-2013,17:59:08 : The return code from the MSI is: 1601
03-19-2013,17:59:08 : Cleaning up the symc status key
03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:59:08 : Clean up Symantec installer keys.
03-19-2013,17:59:10 : Terminal Services enabled.
03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
03-19-2013,18:00:01 : The return code is: 0
03-19-2013,18:00:01 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:02:24 : Windows Operating System Version: 6.1
03-19-2013,18:02:24 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:02:26 : Executing managed _Setup:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:02:26 : Loading XML from:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:02:26 : Launching UI Install
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : m_bUseNativeClient = 1
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:02:26 : CopySupportFiles
03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:11 : The return code is: 0
03-19-2013,18:03:11 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:03:21 : Windows Operating System Version: 6.1
03-19-2013,18:03:21 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:22 : Windows Operating System Version: 6.1
03-19-2013,18:03:22 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:23 : Executing managed _Setup:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:23 : Loading XML from:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Launching UI Install
03-19-2013,18:03:24 : Executing managed _Setup:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : m_bUseNativeClient = 1
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : Loading XML from:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:24 : CopySupportFiles
03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:58 : Typical install value is set to : True
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:05:35 : Install is not executing as the service account.
03-19-2013,18:05:35 : Successfully Logged on as service account.
03-19-2013,18:05:35 : Successfully impersonated service account.
03-19-2013,18:05:35 : EUserName value successfully written to the registry.
03-19-2013,18:05:35 : EPassword value successfully written to the registry.
03-19-2013,18:05:35 : EDomain value successfully written to the registry.
03-19-2013,18:05:36 : There were no remote computers selected for install
03-19-2013,18:05:36 : m_bUseNativeClient = 1
03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:05:37 : Terminal Services enabled.
03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:05:38 : Executing InstallLiveUpdate.
03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Starting Install
03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:05:50 : Discovered Total Actions: 115
03-19-2013,18:05:50 : The return code from the MSI is: 1601
03-19-2013,18:05:51 : Cleaning up the symc status key
03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:05:51 : Clean up Symantec installer keys.
03-19-2013,18:05:51 : Terminal Services enabled.
03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
03-19-2013,18:06:32 : The return code is: 0
03-19-2013,18:06:32 : SUCCESS: Installation has completed successfully.
03-19-2013,18:07:36 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:07:39 : Error initializing shared data
03-19-2013,18:07:39 : ERROR: Installation failed with error 1603. GetLastError = :0
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:47 : Launching UI Install
03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : m_bUseNativeClient = 1
03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:13:48 : CopySupportFiles
03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:13:54 : Typical install value is set to : True
03-19-2013,18:13:55 : m_bUseNativeClient = 1
03-19-2013,18:13:55 : Executing SQL_GetServicePack.
03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : Executing SQL_GetServicePack.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:16:09 : Service account specified is not valid
03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
03-19-2013,18:16:10 : Error validating service account credentials.
03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:16:20 : Install is not executing as the service account.
03-19-2013,18:16:20 : Successfully Logged on as service account.
03-19-2013,18:16:20 : Successfully impersonated service account.
03-19-2013,18:16:20 : EUserName value successfully written to the registry.
03-19-2013,18:16:20 : EPassword value successfully written to the registry.
03-19-2013,18:16:20 : EDomain value successfully written to the registry.
03-19-2013,18:16:22 : There were no remote computers selected for install
03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:16:23 : Terminal Services enabled.
03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:16:25 : Executing InstallLiveUpdate.
03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Starting Install
03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:16:39 : Discovered Total Actions: 115
03-19-2013,18:16:39 : The return code from the MSI is: 1601
03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:16:39 : Clean up Symantec installer keys.
03-19-2013,18:16:39 : Cleaning up the symc status key
03-19-2013,18:16:41 : Terminal Services enabled.
03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:09 : Gathering Telemetry items
03-19-2013,18:17:09 : Failed to start the management service
03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,18:17:09 : Sending Telemetry to Symantec
03-19-2013,18:17:09 : Transmit Telemetry initialized.
03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
03-19-2013,18:17:33 : Telemetry transmission failed. Data was not sent.
03-19-2013,18:17:33 : The return code is: 1601
03-19-2013,18:17:33 : ERROR: Installation failed with error 1601. GetLastError = :0
03-19-2013,18:17:48 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:17:51 : Error initializing shared data
03-19-2013,18:53:53 : m_bUseNativeClient = 1
03-19-2013,18:53:53 : Executing SQL_GetServicePack.
03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : Executing SQL_GetServicePack.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : m_bUseNativeClient = 1
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:58:06 : Windows Operating System Version: 6.1
03-19-2013,18:58:06 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:58:08 : Executing managed _Setup:
03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:58:09 : Loading XML from:
03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:58:09 : Launching UI Install
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : m_bUseNativeClient = 1
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:58:10 : CopySupportFiles
03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:58:15 : Typical install value is set to : True
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:59:43 : Install is not executing as the service account.
03-19-2013,18:59:43 : Successfully Logged on as service account.
03-19-2013,18:59:44 : Successfully impersonated service account.
03-19-2013,18:59:44 : EUserName value successfully written to the registry.
03-19-2013,18:59:44 : EPassword value successfully written to the registry.
03-19-2013,18:59:44 : EDomain value successfully written to the registry.
03-19-2013,18:59:46 : There were no remote computers selected for install
03-19-2013,18:59:46 : m_bUseNativeClient = 1
03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:59:47 : Terminal Services enabled.
03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:59:49 : Executing InstallLiveUpdate.
03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Starting Install
03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,19:00:03 : Discovered Total Actions: 115
03-19-2013,19:00:03 : The return code from the MSI is: 1601
03-19-2013,19:00:03 : Cleaning up the symc status key
03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,19:00:03 : Clean up Symantec installer keys.
03-19-2013,19:00:05 : Terminal Services enabled.
03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:10 : Gathering Telemetry items
03-19-2013,19:00:10 : Failed to start the management service
03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,19:00:10 : Sending Telemetry to Symantec
03-19-2013,19:00:10 : Transmit Telemetry initialized.
03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
03-19-2013,19:00:10 : The return code is: 1601
03-19-2013,19:00:11 : ERROR: Installation failed with error 1601. GetLastError = :0
DJH -
HT1926 (iTunes) Problem with Windows installer package?
(iTunes) Problem with Windows installer package? I try to install the new version of iTunes but get an error "Problem with Windows installer package. A Program required for this install could not be run." Can anyone help shed some light for me as to how to correct this? I have tried to install the program through Chrome, Explorer and FireFox but have had no success. I have included a screenshot of the error. Hopefully it's visable. Thank you for any help.
Found answer for anyone else curious. I love the apple community. Thanks guys for help!
https://discussions.apple.com/docs/DOC-3551 -
Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?
Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert -
I can't install Itunes because of Windows installer package error, please help!
I tried installing Itunes for a long time on my desktop, I'm running Vista. Everytime I try to install Itunes it runs for a bit, then gives me this message
" There is a problem with Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I went through many posts on how to solve this problem, I uninstalled and deleted all the files from this thread : http://support.apple.com/kb/HT1923
and tried to reinstall Itunes, didn't work, same error message.
After i tried to install Itunes in Clean boot still didn't work.
I also downloaded MicrosoftFixit.Program which apperantly fixed this problem for some people, not for me.
Then I extracted Itunes and tried to install all the components seperately, everything installed correctly, however when I tried to install Apple Software update
I got the same error message, i think it is the Apple software update that is causing this problem but I have no idea how to solve this problem.
How do I solve this, any thoughts or suggestions???Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
Now, uninstall Bonjour from Control Panel. -
Unable to install Itunes, Win-XP, Windows Installer error 1722.
When I install itunes on XP-SP3 (fully updated) with Windows installer 4.5 - I get this message half the way through -refer to attachment-
I have uninstalled all apple products, installed quick time - this installed but still provided the error. I have extracted the package and attempted to install each product seperatly however it provides this error only while installing the Apple Software Update. The error code comes from the event viewer.
Any help would be greatly appreciated.This is a serious error. With out fixing this we cannot install itunes on the system. Any help please. Thank you.
-
ITunes 10.5 Windows installer package error?
i created windows installer package for iTunes 10.5. The The problem is when i am trying to install package it throws error like "failed to start applemobiledeviceservice". plz give me suggestion how to solve this error?
There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit*** -
I am unable to install iTunes due to Windows Installer error message on Vista
I needed to update my iTunes since I purchased the iPad2. My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message. I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."
I finally got the program to install/run. I downloaded a third copy and saved it again on the desktop. I selected "Run as Administrator" instead of "Run" It must have been the 10th plus time I tried to install, but this time it completed. I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.
-
"windows installer" issue while running Cap 2
Hi folks,
just re-installed Captivate 2 on a fresh Win XP (SP2) system.
Now everytime I start Captivate and even load a project, first
comes the windows installer telling me "please wait while Windows
configures Captivate 2" -- it does do "domething" and later opens
Cap 2 respectively a loaded project, but why ? I didn´t have
these issues before, does anyone know what´s up ?Hi Gunter. I've seen this happen with other applications but
not with Captivate. The problem was that Windows had "confused" the
path to the executable file from a desktop shortcut. Try using
Windows navigator to go directly to the main folder ...
C:\Program Files\Adobe\Adobe Captivate 2\
... and double-click directly on "AdobeCaptivate.EXE" to see
if that opens Captivate without the installer being kicked in.
If it works correctly that way, just right-click the EXE and
create a new shortcut to replace the bad one(s).
Let us know if this helps, and have a great day!!
. -
Good day, I'm having issues with windows installer on a xp sp3 pc. I downloaded the newest version of windows installer and ran it a couple of times. Every time it installs without problems and then I restart the pc but when I try and install the program
I need the same error comes up to say that windows installer crashed or is not working.
How can I resolve this issue?What do you see in event logs?
Can you post the exact error?
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread. -
Can't update/remove itunes; problems on windows installer
I've been trying to update my 10.6 iTunes because my IO6 devices only require 10.7 but windows installer has been giving me problems. I've got error messages such as;
"Error occured furing installation. Your system has not been modified"
"Windows installer service could not be accessed. This can occur if service installer is not correctly installed. Contact support personel."
"Windows installer could not be accessed. This can oocur if you are running windows in a safe mode or windows installer is not correctly installed."
I 've been searching solution online but still hasn't solve this.
I hope someone can help me with this.Is this on a 64-bit system, steffi? If so, try the following user tip:
"The Windows Installer Service could not be accessed" error messages when installing iTunes for Windows on 64-bit systems -
Error 1606 iTunes crashes at windows installer.. networking problem?
i run the .exe file and it bring sup the windows installer screen, than it will dissapear for a second and come back with this line "could not access network location" and then there is a directory to My Pictures on my network.. please help
I have the same problem. Installing Itunes 7 on my XP laptop. The installer comes with the error, then no choice but to quit the installation. It's even a network share I haven't used in a year. What's the solution please. It's driving me mad... I really need to install this.
-
Cannot install iTunes because of Windows Installer Package
Cannot install iTunes on Windows 7 because of Windows Installer package is missing.
Okay. Even though you're getting a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
Bonjour for Windows installation issue
When running the installer/setup application for Bonjour for Windows on my PC laptop, the installer quits and gives me the error message: "Explorerplugin.dll failed to register."
How do I resolve this problem?I'm having a very frustrating experience installing Bonjour. It seems to start the installation fine and then it stops and say it was interrupted. It gets to the point where it is Publishing Product Information and quits.
good gracious. i'm most familiar with that one from older versions of iTunes and QuickTime installers that were based on InstallShield technology ...
is the Bonjour Installer InstallShield-based? if so, perhaps try checking through the following document:
iTunes for Windows installation quits with 1607 error, while publishing product information, or is interrupted
(on the whole, this is much easier to deal with on XP Pro, rather than Home, if it is what is afoot.) -
MSI 880 GMA-45 Windows installation issues
Just built a system around the aforementioned motherboard.Other components include :
CPU : Phenom II X4 955
RAM : Corsair XMS3 , 2X2GB , 1333 ( Corsair's site states they're compatible with all Amd and Intel platforms)
VGA : Twintech GTX 550 Ti
PSU : Corsair Gaming GS 600
The issue : While the system seems to boot up fine, i couldn't install any operating system , from XP up to 7 .As soon as it would boot up from the installation cd, it'd either throw a blue screen with the irq less or equal error message, or a black screen with the letter "H" in a straight column (weird as it may sound, that's what i got).Moreover , it wouldn't boot up to the previous window installation.
After trying this and that, i swapped out the 550Ti with my older 8400 GS ; same issues.Tried the same without any gfx card on, it would boot from the previous installation, and proceed to windows install .
Is there a setting in my BIOS i am unaware of, or do i have to RMA the board ?
Thanks in advanceIndeed it was a faulty memory stick, ran memtest which came up with errors, swapped one stick out and everything went back to normal.Thanks for your aid
Maybe you are looking for
-
Can I install Oracle XE on a system that has the Instant Client installed?
Hello, After installing Oracle XE (Oracle Database Express Edition 11g Release 2 for Windows x64) on my Windows 8.1 64-bit system, I can not connect to the "Get started" url (http://127.0.0.1:8080/apex/f?p=4950). The output of "Start database" shows:
-
Need Urgent Help with Apache and PHP
I have been struggling with apache and php for a week now and I finally broke down to post a message. I have apache 1.3 running on my mac mini g4 with 10.4.9 and I installed sql. I went to the entropy website and downloaded php5 to install without kn
-
Can one copy a text layer's content to the clipboard?
I have searched for this but have been unsuccessful in doing so...I want to be able to either; a: copy the contents of a text layer to the clipboard so that when saving a file I can simply paste and save or... b: save a file by the contents in
-
How to format macbook pro to install mountain lion
I have a macbook pro i5 and mac osx 10.7.5, and i would like to update to mountain lion. I would like to know if I need to format my mac and how?
-
Dilemma?? GTX 570, 580 or Quadro 4000
hey guys apologies if im in the wrong place for this, its my first ever post online! I have a slight dilemma, I have just recently ordered a new setup, however im confused as to which graphics card to go for. I will mainly use the system for HD Vide