ITunes 10 aborts iPad update with error 1631

Hi all,
I've just switched to iTunes 10 and tried to "search for updates" for my lovely iPad 32GB+3G (without using a micro sim). But iTunes 10 aborts my update reques with a errorcode 1631. The message is like that: "itunes was unable to search for updates for the network operator settings for your iphone."
iTunes 9 was working fine. My iPhone is working with iTunes 10 as expected.
So, what should I try, before downgrading to iTunes 9 again?

I upgraded to itunes 10 (awefully long and slow process) and now my netbook cannot find my ipad. Windows Xp can. The ipad registers on itunes with the same cable on another computer.
I have followed the advice on the Apple support page
1. Have stopped and restarted the ipad service
2. uninstalled and reinstalled itunes 10
3. uninstalled itunes 9 and reinstalled itunes 10 (the itunes libary will not read and itunes fails to start)
4. have reinstalled itunes 10
And still itunes 10 will not find the device.
This has been a totally awful experience worthy of a microsoft vista award

Similar Messages

ITunes fails to install with error Ox800736FD. Any ideas?

iTunes fails to install with error Ox800736FD. Any ideas?
Trying to install on a Acer Aspire-- no CD/DVD

Ox800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows Update failed to check for updates with error 0x800B0001

Hi all,
I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
Windows Update failed to check for updates with error 0x800B0001
Note: I cannot see the Win2K12 server in the WSUS console under computers node.

I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
http://tplive.azurewebsites.net/2013/12/windows-update-error/
You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
not recognize that the installation of the update was not successful.
The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
properly and completely patched.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
But I proceed to type the words do not transfer to the screen.
Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
How long before they are?

The BestBuy guys are clueless. I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them. You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

Windows failed to install the following update with error 0x80070005

Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-us

Okay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

IPad update/restore error and itunes no longer recognizes device

I just updated my iPad to 5 today. An error occurred during the restore and it is now stuck on the "connect to itunes" screen. I have followed all the instructions to restart my iPad but now itunes will not recognize it. When I follow these steps, the connect to itunes screen comes on but itunes does not start on my computer. When I open itunes, the ipad is not listed as a device. I've researched a ton of threads and have tried the following with NO success.
Different USB
Verified current version of itunes
Verified & restarted AMDS
Reinstalled itunes
Temporarily disabled security software.
Ran msconfgs
I am so frustrated that nothing has worked and my iPad is still stuck. I wish I had never done the update. Please help!

Unable to update or restore
http://support.apple.com/kb/ht1808

TS1363 my itunes will not update a error message apears during dload C:\Users\Edwin\AppData\Local\Apple\Apple Software Update\ my phone has the new update and now wont sync with my pc due to this

my itunes will not update keeps comming up with a error when dloading the latest version now my iphone4s wont sync as it has the latest software

Is the message refering to a specific .msi file? If so, which particular .msi is it referring to? (iTunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

Can't upgrade my ipad2 to ios5 .. itunes says ipad update server not found

I have my main desktop I use for setting up my new iPad2. Syncs fine, but when I tried to update to ios5, keep getting message that ipad update server is not available, check internet connection. Itunes sees the internet, because it allows me to connect to the istore .. etc. Changed cables, I have tried it with firewall on, and firewall off .. makes no difference. The test shows no connection, but you can see by the diagnostics that it did connect.
PC is XP Pro,
I could connect fine from my laptop, working on same home network, however if I upgrade, it will dump all my apps .. I don't want to lose everything.
Is there a way to unsync my desktop, then sync with my laptop instead, backup, then do the update from my laptop?
Here is the info below ..   Thank you ..
The diagnostics file shows;
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-S2L
iTunes 10.5.1.42
QuickTime 7.7.1
FairPlay 1.13.36
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
Current user is an administrator.
The current local date and time is 2011-11-27 20:39:51.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16002)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.1.42 is currently running.
iTunesHelper 10.5.1.42 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Description:          Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC - Packet Scheduler Miniport
IP Address:          192.168.1.99
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          No
DHCP Server:          255.255.255.255
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:          192.168.1.1
Active Connection:          (none)
Connected:          No
Online:                    No
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-27 20:27:00.

It's my understanding that you do not need Lion on your Mac but you do need the latest version of iTunes. If you already have this, there may be some other problem.

IPad update failed, error 1602

Does anyone know how to fix this?
I connected iPad to windowx xp desktop with latest itunes and it asked to update the iPad. After the update failed, it keeps showing connect to itunes on iPad, yet the itunes doesn't seem to recognize it. Also as I connect iPad it shows in the bottom right *Apple Mobile Device (recovery mode)* and Found New Hardware window pops up. Does this mean I will lose all apps and saved files/books?
Message was edited by: HLemmik

HLemmik wrote:
Thanks but I'm not even able to recover at the moment.. I called in and did what the support suggested, uninstalling all 3 apple programs + itunes and quicktime and restarted, reinstalled itunes, restarted and plugged ipad back in. Result is still the same. iPad shows connect to itunes and my computer displays "Found New Hardware" window while itunes doesn't show any devices. So I'm guessing something with drivers?
This is what it shows in device manager:
http://designftw.com/iPad/ipad_devicemanager.jpg
I wish I didn't do the update at all
You need to do the updates, because they slowly improve the performance of your iPad. And soon, iOS 4.0 is coming, which you will absolutely want, because it take the iPad to a whole new world.
I'm not even close to being an expert on Windows, not having used it in about 10 years. But I've monitored this board for a while, so here are some suggestions:
1. Try a different USB port, if you have one. Don't use a USB hub, try to connect directly to your computer.
2. If possible, see if your cable is damaged. It happens.
3. Before doing this, just make sure you have complete backup files from your most recent backup. I'm not sure where to find them, but as I recall, they should be located in your iTunes files. Then, completely reset and wipe your iPad, by going to Settings, General, Reset. Again, don't even consider this if you can't find your backup locations. You might want to search these discussions with "backup AND Windows AND location" to see where they're located.
If none of this works, go to an Apple Genius. He can plug you into a Mac to see if the iPad has a problem.
Again, it's not the update that caused the problem, it's a corrupted file or something. You'll fix it, so don't worry.

Itunes says ipad sync with other library but i downladed everything directly from the ipad.

hello, I downloaded all apps directly throught the ipad as I wasn't sure how itunes worked (i tried but couldn't). Now I'm trying to sync it and it say it is allready sync with another library and that I will loose all apps. I have all passwords but don't really now where to use them. And I dont really wat to pay all the apps again. What can I do?
Thanks

Is your computer authorized with your iTunes account with iTunes?
If so, with your iPad connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPad.
Now you should be able to select Sync Apps under the Apps tab making sure all apps below are selected before syncing.
You can re-download purchased apps without having to purchase the apps again.
http://support.apple.com/kb/HT2519

ITunes Crashes after clicking iTunes Store but updated with the latest version

iTunes Crashes after clicking iTunes Store. iTunes is updated with latest version still it didn't helped, have uninstalled & reinstalled.
Provide some resoultion

Hello energeticbala
Continue your troubleshooting with the article below for issues with iTunes crashing. Try opening it in Safe Mode and go to the iTunes Store to see if it stills works. The article will go on to troubleshoot if it user specific or system wide.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
-Norm G.

Camera RAW update with errors

I am running CS6 on a Macbook Pro. Photoshop cannot read camera raw files from my new Canon 6D. I went through the update process and as expected I needed a newer version of ACR. I completed the update process but with errors. Camera Raw was not updated. I was advised to try again. However, when I attempt to go through the update process again I am told that all apps are up to date. How can I complete/fix this update?
Randy

@ randyhat1,
This is really unfortunate that you are facing issues with ACR updates.
Please verify the current version of ACR on your system.
Also provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
You can zip all the files together and send us through mail. This would help us in finding the root cause.
We can setup a connect session for resolving the issue, What time frame would suit you for connect session? Do let me know accordingly I would send you the request.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh

Why is iTunes store not updating with new episodes

I've followed all the rules and have successfully updated with 18 episodes. Now, the past two episodes have been posted and while they show up if one is already subscribed to the RSS feed the newest episodes are not appearing on the podcast page in the iTunes store. Anyone else experience this frustrating problem? Suggested solutions other that removing the feed and resubmitting? Thanks, in advance, for your help!

I am having the same issue. I know what the issues are in the feed validator, but I put them there for use in the xml side of our site. I don't see why there would be an issue.
I have a category channel element added which gives each episode its own tag which I call for on our website. If you have time, can you please check if these issues need to be resolved?
http://www.null.jo/rss/rss.xml
I also have a new rss feed I want it to update to and it just isn't doing it. Thanks a lot.
Yazan

ITunes 10 aborts iPad update with error 1631

Similar Messages

Maybe you are looking for