ITunes 10 clicking on column heading bug?

I really hope this is a bug - but clicking on a column heading (Rating, Name Artist etc.) doesn't work properly. Clicking on a column heading is meant to sort that column from top to bottom, and takes your view to the top or the bottom of that column.
So clicking Artists in iTunes 9 sorts Artist top to bottom, showing me...um.. ABBA. My selection stays where it was on whatever song I had selected. Clicking the heading again sorts the other way, and shows me the last alphabetical artist in my iTunes library.
But with iTunes 10, it "works" differently: clicking on the heading sorts everything around your selection, leaving the selection in view. Clicking it again, sorts everything around your selection the other way. This makes clicking on headings pointless, does it not?
Or is this some deliberate change?
Merlin.

I've had this issue, too. My podcasts now only display in broadcast order, and not grouped by podcast, which is annoying when you want to use the album art view (which even then isn't as useful, since they minimized the artwork to put the title and rating beside it...).

Similar Messages

Sorting the report by clicking the column header

Hello,
Currently working on a requirement where i need to sort the report by clicking the column header. Can anyone please help me on this.
Suppose i have 3 colums deptno,dname,sal fields in my report. if i click deptno column header, report has to sort by deptno.Like that i need for other columns also.
Any help is really appreciated
Thanks
Ram

Hello,
You can sort the fields using method suggested by Cauvery. However if you would like to have Ascending/ Descending sort order control at column header, then would require to implement few additional steps.
First do the sorting of field using the way suggested by Cauvery. Once sorting is done, right click on the column name and select the option ' Bind Sort Control'. You will see the sorted field in the window. select the field and click ok.
Now you would get 2 arrows on column. If you click upper arrow, fields would be sorted in Ascending Order and if you click on down arrow, it would be in Descending order.
Regards,
Chinmay Athavale

Can clicking on column heading sort the column contents instead of drill in

I have a pivot table with data that the client doesn't want to drill into. Instead, they want to be able to click the column heading and have the pivot table re-sort the data in the table based on the data in that column. Is that possible, or are clickable column headings only used for drilling in OBIEE? Thanks.

Madan -
That seems like a feature that should be added to the Pivot Table view if they are going to have it in the Table View. Still, thanks for pointing out the "Enable column sorting in Dashboards" check box in the Table view. I'll see if I can either get this data into the Table view, or at least let the client know the limitations of OBIEE.
Thanks again.
Daniel

ITunes 7 column header bug

Here's a screenshot: http://img175.imageshack.us/img175/2452/picture1fs5.png
Has anyone else noticed this problem?

Glad to see I'm not alone in experiencing this issue. Anyone have any word on a fix?
For what it's worth, this particular redraw issue is repeatable both on my new iMac and my elderly G3 iBook: I launch iTunes, hide it (⌘H), bring it back to the front, and, voila -- column-heading font redraw issues.
iMac 20", G3 icebook Mac OS X (10.4.8) Mac user since 1981

Swing JTable error when clicking on column header

Hi I'm using ADF Swing in JDev 10.1.3 linking a UI JTable to a ADF viewobject, when clicking on the column header i get the follwing:
[ConditionalEventPump] Exception occurred during event dispatching:
oracle.jbo.InvalidObjNameException: JBO-25005: Objektnavn 1 for type Variabel er ugyldigt
at oracle.jbo.common.VariableImpl.validateName(VariableImpl.java:234)
at oracle.jbo.common.VariableImpl.setVariableKind(VariableImpl.java:301)
at oracle.jbo.server.ViewRowSetImpl.defineNamedWhereClauseParam(ViewRowSetImpl.java:3390)
at oracle.jbo.server.ViewObjectImpl.retrieveByKey(ViewObjectImpl.java:10374)
at oracle.jbo.server.ViewObjectImpl.retrieveByKey(ViewObjectImpl.java:10180)
at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:3955)
at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:3794)
at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:3782)
at oracle.jbo.server.ViewObjectImpl.findByKey(ViewObjectImpl.java:6991)
at oracle.adf.model.bc4j.DCJboDataControl.setCurrentRowInRSI(DCJboDataControl.java:930)
at oracle.adf.model.bc4j.DCJboDataControl.setCurrentRowWithKey
(DCJboDataControl.java:881)
at oracle.jbo.uicli.jui.JUTableBinding$1$1.run(JUTableBinding.java:222)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:158)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Hi,
in this case the bind variable name comes from the viewLink definition. What is the m/d, is it based on e.g. Departments/Employees pushing the ADF BC wizard? I need to understand how to build a testcase that allows me to reproduce the issue. Do you show both , master and detail on the Swing form, or only the detail?
Frank

Selecting Categorized Message and Clicking Category Column Heading Moves View to Uncategorized Messages

Greetings,
We migrated our users Microsoft Outlook 2010 mailboxes in Cache Exchange Mode last week from Exchange 2007 to Exchange 2013.
ISSUE: Yesterday, one of our secretaries reported that when she selects a Categorized message from her supervisor's shared mailbox and clicks the
Category column heading to arrange the messages by the specific Category in the message, the messages do not automatically arrange based on the selected message, but instead the view moves to messages that have no Category set at the top of
the list of messages.
The interesting thing is that the user
is able to arrange her own mailboxes messages in that fashion with no such problems.
Any advice you can provide towards a resolution would be greatly appreciated.
Thank You,
LawTechy

Thank you for your response Allen; however, the issue is not with Tasks, but with Messages.
For example, if the user selects an email with the Categories "REMINDER", then clicks on
Categories column heading at the top of the window to arrange the messages.
(It doesn't matter if they arrange from A to Z or Z to A.) Then the window with the list of messages focuses on messages with no Categories, rather than on the messages with the Categories "REMINDER". The user then has to scroll
up or down to find the emails with the Categories "REMINDER" and the folder has hundreds of messages.
I appreciate the suggestions. I will try them and let you know if either works or not. Thank you!

Ordering JTable rows when you click a column header

Hi! Maybe i want something impossible, maybe not.
I have a JTable and i want it to be ordered depending on the column header you click (similar to any explorer files)
Can anybody give me a hint?
Thanks in advance!.

thanks. Anyway, i have another problem. I add the 3 lines of code just like the Java Tutorial said, and then it throws a NullPointerException in paint() method. I know it�s not much information about it, but i thought someone could give me a hint.The only difference is these 3 lines, and it worked properly.
Thanks again!

Does component af:table support auto resorting when click on column head?

or further, could we customize the resorting principle, just like java api Comparable/Comparator does.
Thanks you.
Kevin.

Hi,
the table supports sorting, yes. The sorting is defined in the table model and not changeable without changing the model. However, you can setup a sort listener and use the event notification to re-query the data with a condition of you choice
Frank

Get clicked column header not working

Here's what I'm trying to do:
Have a multi-column listbox of elements. Allow the user to select a few rows he is interrested in (and the become highlighted). Allow sorting of the listbox by clicking on the column headers.
I've got the listbox populating fine, if nothing is selected, the sorting works fine (event structure based on mouseup event of the multi-column listbox, calling to the "get clicked column header" invoke node method sorts the data. The part that is not working is that If the user has elements selected, sorts the listbox, the same elements are selected (not the same rows, but those same elements in whatever row they ended up after being sorted).
What happens is if I select a few rows in the listbox (listbox configured for 0-N elements selectable, highlight entire row), and then click on the column header, the event structure fires off a value change event for the listbox and changes to no elements selected. if I then click the column header again, it fires off the mouse up event and I get the sorting, but now none of the rows are selected. Weird thing is that first time I click the column header and it fires the value change event, a call into get clickced column header returns negative value so it won't tell me which column header the user clicked to "empty" the selection.
Bugger!!!! doesn't work how I want it to.
Funny thing is if I change the listbox over to a 1-N elements selectable, and then select a few rows, and then click on the column header, the event structure fires off the mouse up event and I get the sorting and re-selecting exactly as I would expect.
What's the deal here?? is this a bug, or expected behavior. If it's expected, it would be nice if it were a little more consistent between the different types of listboxes. Also, any good suggestions as to how to allow users to have 0-N selected elements, and be able to sort the listbox and keep the selected rows selected?

Sounds annoying. Here is a variation of my goto method for these types of problems:
Use the MouseDown? event to catch important info like the old value.
Restore the old value at the end of the Mouse Up event.
Some details, like making sure that the down and up clicks are in the same cell.
Use Defer Updates to prevent flashing.
One of many kluges I have around for the MC Listbox....
Attachments:
MCListboxKluge.vi ‏20 KB

IR column Header value not displayed entirely during filteration

I have a IR, when I click any column Header and it shows the list of values as a dropdown.
some of them (which are larger) get cut off.. means the the entire content/value are not displayed within the dropdown. [width of dropdown is fixed and no of characters in the content/value is more..]
how can we fix this?
Also.. is there any we can increase the width of the Select List window when we click any column header in IR.
Thanks,
Deepak
Edited by: DeepakJ on Sep 15, 2011 4:08 PM

Hi,
jQuery is not included to Apex 3.2 by default.
If you have not include jQuery library's to e.g. your page template or page header, then it is not "installed".
You can run your app and inspect HTML source to be sure.
You can download jQuery and jQuery UI and place files to your HTTP server folder. Then load those in e.g. page template header.
Or use jQuery files from Google by placing to page template header.
<link type="text/css" rel="stylesheet" href="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/themes/redmond/jquery-ui.css" />
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script>
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"></script>Regards,
Jari

Problem with column heading sorting

I have a problem with a classic report.
I created a simple report. We want to sort the report, when we click the column heading. But when we cklick on the column heading, nothing happens. In firefox we get the error "apex.jQuery.datepicker is undefined".
When we created another simple report and connect against another database (but the same web-server), we can sort the report, when we cklick a column heading. On both databases we installed the same apex version (=4.0.1.00.03).
on "apex.oracle.com" (workspace:ama / user:demo / pwd:demo) I created an example.
what is wrong?? Can anyone help me ??
Thanks
Robert

Hi Jari,
yes, you are right. I changed my query. I attempted to find a solution and so I changed the query several times => I used other tables, with or without date columns, with or without columns in the select and so on.
You said, the problem is the authentication scheme. It crossed my mind that I do another change:
during the creation of my application apex created a login page => page 101. For my example application I don't need a login page, and so I droped the page. After starting the application I saw the error message "page 101 not found ". So I searched for a property where apex definies the "start page" respectively "login page". But I don't found anything. Then I looked into the export file and searched for "101". I found the package procedure "wwv_flow_api.create_auth_setup" and the parameter "p_invalid_session_page", which receive the value "101". In apex the property "Session Not Valid Page" was blank. So I inserted the page number "1" (=the first and sole page in my application).
After the explained changes I could start my report.
I don't know, whether these informations help to find the problem!
Regards
Robert

Get the arrow on column header data table

<t:commandSortHeader columnName="spclMngmtAreaNm" arrow="true"
                              immediate="true">i am using <t:commandSortHeader with t:dataTable ,
when form intialize this arrow on datatable not showing.
when i click on column header only showing arrow .
how to show arrow on datatable column by form inilize.
thanks
siva

The easiest way to do this: set a default value for the sort column in your backing bean.
Example:
     private String sortColumn="firstName";
     public String getSortColumn() {
          return sortColumn;
     <t:dataTable sortColumn="#{yourBean.sortColumn}" ... />On page load, the arrow is set by default to the firstname column.
Best Regards,
Dimi

How do I sort songs in the iTunes store? You used to be able to click on the column header to sort the column (ie Popularity)?

How do I sort songs in the iTunes store? You used to be able to click on the column header to sort the column (ie Popularity)?

It seems this is a "backwards" upgrade from Apple in their iTunes 11 release....like you, I used to use that function in the iTunes store to sort through and decide which song version to purchase. (For a large returned list of songs...see all...then sort by any of the headers, including Popularity...this functionality is now gone.)
The iPad always suffered from this...was never able to sort on those same column headers with an iPad. It seems, this new iTunes release killed that functionality on the Mac as well.
Just one of the few things that went wrong with number 11!
Better luck next time,

Cannot auto size columns in iTunes 10.4. Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns.

Cannot auto size columns in iTunes 10.4. Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns. Cannot order albums alphabetically by double clicking on heading.

Very many thanks to you, Putaro! Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
If you've got Jax installed, consider removing it before updating to iTunes 10.4.
My iTunes is now working right as rain, thanks again to Putaro!
-Jon

How to sort data in descending order when user clicks on the column heading

Hi
I have a report called "Top customers", which shows the top customers for a specific product line. It displays the customer name and one column with the total amount spent in the period for each product line. By default, the leftmost product line is sorted in descending order.
If the user wants to know who are the top customers for another product line, they simply click on the column heading to sort the list by that column.
The problem is that when you click for the first time on a sortable column heading, Apex sorts it in ascending order; you need to click on the same column heading again to sort in descending order.
Is it possible to change this behaviour and sort the data in descending order in the first click? So the users don't have to click twice...
Thanks
Luis
PS: Apex 3 running on Oracle 10.2.0

Luis,
See: Can I "catch" a click on a sortable column header of a report?
Take a look at Anton Nielsen's answer with regards to hiding a column and displaying its value instead of the sortable column.
Asumming the following simple report query:
select product,sales
from <table>
Change that into:
select product
,sales*-1 as reverse_sales -- Select this one as an extra column
,sales -- Hide this column
from <table>
In your report column attributes (of column reverse_sales), html-expression, type #sales#. It then displays the normal sales. However apex will generate a 'order by 2 asc' for the first time. The '2' will refer to the sales*-1 value: sorting it asc, is the same as sorting sales descending...
Toon

ITunes 10 clicking on column heading bug?

Similar Messages

Maybe you are looking for