ITunes 10 disables Wireless

Hi there,
So I've upgraded to the newest version of iTunes on my laptop. Since then, my wireless disappeared. I could not even create a new wireless network, and could not connect to the internet at all. I finally got frustrated and did a System Restore to the day before and everything worked fine again. However, now the iTunes does not work at all and tells me I have to re-install it. I can't update to iTunes 10 because of the bug but now I can't even have the older iTunes. Please help!

I'm having the exact same problem. I need to update my phone and this is causing problems for my iphone. I tried to call Apple and the iPhone line about it and they couldnt help me either. Is their a way to possibly pinpoin the bug that is causing this problem?

Similar Messages

  • Airport Utility Disables Wireless Connection - No Connectivity Error

    In setting up an AX to stream iTunes to my stereo over my existing wireless network (Netgear access point), it appears that the Airport Utility has somehow disabled wireless access for my laptop, as I now get a "limited or no connectivity" error message and cannot connect to the internet.
    Airport Utility detected the AX, I set a password for it, directed it to join my wireless network, selected WPA2 encryption and entered the 26-character key to the network. AU then said the AX couldn't join the network, and wireless connectivity for the whole PC disappeared and I haven't been able to get it back.
    It appears that Airport Utility somehow altered some of the network settings on my PC but I can't figure out what. I spent hours trying to figure this out last night and am at a loss. Help!

    Welcome to the discussion area, mrdowntown!
    When you are setting up the AirPort Express, you are using a default network provided by the Express with a name like +Apple Network xxxxxx+. You need to be on this network to be able to configure the device. Your computer was on this network.
    Chances are, your PC may still be trying to access that network, and not the network that you normally use. See if that might be the case.
    WPA2 Security would be used on the AirPort Express if that is exactly the setting the Netgear router is using. If the Netgear is using WPA type encryption, try the WPA/WPA Personal setting on the AirPort Express.
    Unless the security settings match up exactly, the Express will not be able to join the Netgear wireless network correctly. See if you can find the settings page for the Netgear to see exactly what type of security it is using.
    You'll need to "hard reset" the Express by holding in the reset button until you see the amber light begin to flash more quickly. Then try to reconfigure the Express. Unfortunately, if you don't have the right settings entered on the Express, you'll have to start all over again.

  • ITunes 11 - wireless sync gone?

    I'm running iTunes 11 on a windows laptop.
    I have an iPad 2 and iPhone 5 running the latest iOS software.
    The ability for iTunes to wirelessly find/sync my iOS devices does not work.
    Has this function been disabled from iTunes 11?

    I am in the same boat, I think its unfortunate they promote a feature that no longer works... they should get this fixed!

  • Iphone 4S updated to iOS 5.0.1 last nite no longer visible in iTunes for wireless sync.  check box is viewable as checked when connected via usb. anyone else having this problem and been able to sort? Thanks.

    Hi all.  Update my iphone 4S via usb last night.  Since then the iphone is not visible in itunes for wireless syncing.  The sync wirelessly box is checked and is viewable as checked when phone connected via usb.  Anyone else have this problem and been able to sort?  Thanks.  Doug

    Hi all.  Update my iphone 4S via usb last night.  Since then the iphone is not visible in itunes for wireless syncing.  The sync wirelessly box is checked and is viewable as checked when phone connected via usb.  Anyone else have this problem and been able to sort?  Thanks.  Doug

  • Itunes and wireless devices no longer show up in upper right corner of itunes window

    Help! My Internet service was interupted last week and when it returned my iTunes and wireless devices no longer show up in upper right corner of the iTunes window.  I finally figured out how to get both of my wireless devices to show up on the left hand column under devices, but nothing else shows up now in the upper right corner!  I cannot for the life of me figure this one out and the tech manual is not helping at all.  Help!

    If you have the left-hand sidebar showing then that is where the store and your devices will show can be selected - if you press option-command-S if you are using a Mac, control-S on a PC, then the sidebar should be hidden and the store and device should go back to the top right. Is that what you mean ?

  • Disable wireless broadcasting - HP laserjet pro 400 color mfp m475dw

    How do I disable SSID broadcasting for HP laserjet pro 400 color mfp m475dw.  I have turned off wireless configuration through printer web console, but it is still broadcasting.  I have also updated the firmware to latest available 20131028.
    This question was solved.
    View Solution.

    The information is in the manual.  Did you download it and read it?
    Go here.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=433754...
    Page 28 Network options.  Disable Wireless Direct.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Windows 7 and XP Disable wireless when connected to hot wired

    Hello there,
    We are facing IP address shortage due to redundant network connections from laptops because every laptop uses two IP address when connected to wireless network and hard wire. Does Windows 7 and XP natively has the options to disable wireless when a laptop
    is connected to hard wired? I know the wireless can easily disabled by manual process but problem is user don't have the knowledge or don't bother to do that. So if there is a way to use GPO to configure this would be ideal -- no 3rd party solution please.
    Any suggestion is most welcomed.
    Thanks,
    TL

    There are no Fail proof ways for Win 7 or 8 to make sure that AT ALL times Wire is used over WIFI. The metric setting is ignored by MS. I know cause my metric for the wired is 10 and for the WiFi is 9999, but at all times the WiFi is used instead of the
    Wired. This is by design as Microsoft being as inept as always did not properly design their operating system. This is a DESIGN DEFECT, which Microsoft will not admit to, despite the fact that it could be caused by no other method EXCEPT incompetent design,
    ignored during quality assurance testing etc. The reason there are a million people looking for a fix for this design flaw is that there is NO fix available. MS will not fix it as they got your money and could care less. Being that they are among the most
    evil and greedy companies currently in business is why it will never be fixed. I dare them to prove me wrong and fix the obvious design defect. I double dare all who read this to log in to the MS tech net and demand that they fix this DESIGN DEFECT.
    Any developer qualified to design an OS should have no problem permanently fixing this and Microsoft has NO EXCUSE for not doing so with an update!!!!!! All they have to do in the code logic is ask the system if the device getting an IP etc is using a "radio"
    then it asks all the other devices that are getting or have gotten an IP if it was gotten via a radio, If during any of these quires the answer is I DID NOT get my IP from a radio connection then that IP path gets priority and all the others, IE WiFi gets
    disabled. Then if there is a change in the network, loss of connectivity for example, the process is repeated and when everything say's it got its IP from a radio then the WiFi takes over. So in a nut shell every connection is looked at to see if it is from
    a radio based device or a hardwired based device, NOT using metrics since that apparently can not be counted on, the prof is in the 500+ PCs I just setup, ALL OF WHICH GIVE A SIGNIFICANTLY LOWER METRIC TO THE WIRED, but still choose the WIFi. The order of
    the connection establishment should not matter since the test is performed on every connection and as soon as one is found that is not radio based, it is left on and all others are turned off. Common sense really. This is NOT ROCKET science! Just good common
    sense programing.
    So I challenge everyone who reads this comment to add a demand for MS to fix the DESIGN DEFECT once and for all.
    That's all I have to say. If there is a script as some of the suggestions here mention that can do it, if there is a single 3rd party product out there that can do it, then there is NO EXCUSE for MS not to provide a PERMANENT OFFICIAL MICROSOFT CERTIFIED
    FREE fix for this DEFECT. And yes it can only be classified as a DESIGN DEFECT as common sense say's you would AT NO time under normal operations EVER want the MUCH slower WiFi, 100 mbps  compared to 1000 mbps for wired to be in charge. EVER! Even if
    the wired nic is only 100 mbps, some cheep junk laptops have the indecency to come with a 100 mbps nic instead of a Gigabit, the Wired is still better 99.99999% of the time.
    And one last thing this IS THE ONLY REAL ACCEPTABLE ANSWER to the original question, and all the others just like it who EXPECT, with GOOD REASON, that COMMON SENSE, would be in charge NOT ignorance and defective designs, and that AT ALL TIME WIRED RULES
    OVER WIFI.
    Hope this helps, it is time to insist that MS do their job AND FIX THE DESIGN DEFECT!!!!!!!!!
    Ralph
    PS Not all systems have switches on the outside for disabling the WiFi. My HPs don't and trying to train all the users on how to MANUALLY disable it and when to do so etc is like trying heard flock of sparrows, it's not happening, NOR SHOULD IT NEED TO!

  • How can I disable wireless admin privileges to the router ?

    I am using an Airport Utility for Windows for Airport Extreme. For the sake of better security, how can I disable wireless admin privileges to the router so that the router can only be configured via hardwire connection?

    For the sake of better security, how can I disable wireless admin privileges to the router so that the router can only be configured via hardwire connection?
    Sorry, but this is not possible.
    If you want to limit access to administration of the router, you should change the Base Station password, and only give out that password to those individuals that you want to have access to the administration settings of the router.
    The forums have been having problems displaying screenshots, but we will attach one below in the hopes that the problems may be fixed.
    Important Note.......even with this,  "security" on the AirPort routers is an illusion.......since a one second press on the reset button will give any user 5 minutes of free access to go in and change any settings that they want. 
    So, you might want to keep any eye on things.

  • Problem disabling wireless option on a BEFW11S4

    Hi. Recently, my roommate making use of the wireless capability on our linksys decided to hardwire his connection like my other roommate and I. The topic describes the dilemma we're having now, and we believe it is what is contributing to an incredibly slow internet speed at the moment since we have many other wireless users in our area.
    My roommate attempted to disable it on his computer by going into the setup as described by the manual. He used the default IP, went to set up and selected the option to disable wireless. Then he tested the wireless connection out to see if it was disabled, and he still saw our network available. I then tried accessing setup on my computer and it still reads as being "disabled," but it isn't.
    I'm not sure if we just need to reset our router in a certain manner, if there's an issue with having to fill in our domain name, or whatever it is that is not making the alterations to our router stick. As you can tell, I'm not too router savvy, so any insight you can pass on to me would be most appreciated.
    Thanks in advance.

    hi there, it might be that the wireless you're connecting is not from your wireless router.. it might be that the connection was from your neighbor.. the reason why i said this is because I just thought that your SSID might be the default "linksys"... of course, there are some, if not most, that will just leave their SSID as just "linksys"
    to verify that the wireless being disabled is working, you will need to change the SSID of your router to see if you are still seeing your SSID... if not, then basically the disablity of wireless option is working
    "a helping hand in a community makes the world a universe"

  • How to Disable wireless on my Express?

    I'm in the process of setting up a Sonos sound system in the house. Need to disable wireless on my ape. Running lates software/IOS.
    Don't seem to find the previous option to disable the wireless net on my ape?

    What version of AirPort Utility are you using to configure the AirPort Express?
    If you are not sure, click the AirPort Utility menu in the upper left corner of the screen.
    Then click About AirPort Utility to find the info.

  • How to disable wireless for Version 4 G LTE Broadband Router with Voice?

    How can I disable wireless on the Version 4 G LTE Broadband Router with Voice?

        Gothcha! Thanks so much for following up and providing this information, James2014. I've provided a link with the instructions to turn off the wireless radio on the device. Check it out here, http://vz.to/VEHZt0
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • Disable Wireless on Wired LAN Connection

    Hi,
    Right Now, my macbook pro use my ethernet and my wifi at the same time and i don't want that. Is there a way to say to my macbook pro to stay only with my ethernet connection when my cable is plug in it and no wifi come by? (I travel a lot with my mac and i cannot just do Turn Off / ON Wifi each time i plug ny cable in my mac)
    Thanks in advance

    The issue with what everyone suggests is that your computer STILL obtains 2 IP addresses. If you have 4 laptops in the family thats 8 IP's.. if you're in a workplace of 30 people thats 60 IP's for 30 systems.. doesn't matter if they are being 'used' or not. it's a huge waste of network resource.
    Thats a HORRIBLE way to manage your resources. Plus, it wastes battery maintaining a connection it doesn't use.. Thats just silly! Apple truly does need to address this.. Even Dell laptops disable wireless connectivity (turns wifi on for GPS as needed, but keeps from connecting) while wired is connected.

  • How to disable wireless on wrt54g2?

    I have a Linksys router model wrt54g2 v1. My operating system is Windows XP Pro. The router works fine. When I ran setup the first time, I opted to enable wireless (Wi-Fi). However, the computers using the router are all cable-connected to the router, so I do not need the wireless capability. My question: How do I now disable wireless? Do I need to run the CD “Start Setup” process once again? The control panel does not seem to offer any configuration options. I have posted a screen capture of the control panel at http://64.33.7.192/linksys.gif. (I tried without success to post this question at the support Live Chat.) Thanks for your help.

    What browser are you using?
    Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
    Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
    Clear all browser caches.
    Be sure to log into the Admin account on the router.
    Try turning off these features in Chrome:
    Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
    Uncheck these:
    Use a web service to help resolve navigation errors
    Use a prediction service to help complete searches and URLs typed in the address bar
    Predict network actions to improve page load performance
    Enable phishing and malware protection

  • Have to disable Wireless MAC filter to see other computers

    I have two Windows 7 machines connected by wireless-N to my WAG160N. I frequently find that, although both computers can see the network, they can't see each other. I can temporarily solve this problem by disabling, and then re-enabling, the Wireless MAC filter. Any suggestions welcome
    Solved!
    Go to Solution.

    Unfortunately just leaving MAC filtering off doesn't help. I have to turn it off and then it on again every time. As soon as I turn it on again the other computer becomes visible. Here are my settings:
    Encapsulation: RFC 2364 PPPoA
    Multiplexing: VC
    QoS Type: UBR
    Autodetect: Sisable
    Virtual Circuit: 8 VPI, 48 VCI
    DSL Molulation: Multimode
    DHCP Server: Enable
    DDNS Service: Disable
    MAC Address Clone: Disable
    NAT: Enable
    RIP: Disable
    Wireless Configuration: Manual
    Network Mode: Mixed
    Radio Band: Standard - 20 MhZ Channel
    Wide Channel: 4
    Standard Channel 11-2.462 GHz
    SSID Broadcast: Enable
    Security Mode: WPA2-Personal
    Encription: TKIP or AES
    Pre-Shared key: <something long>
    Key renewal: 3600 seconds
    AP isolation: Disable
    SPI Firewall Protection: Enable
    Filters: nothing checked
    Blok WAN Requests: Block Anonymous Internet Requests
    UPnP: Enable
    Management via WLAN: Enable
    IGMP Proxy: Disable
    Firmware Version: V1.00.15

  • Disabling wireless

    A simple enough requirement, you'd think - I wish to disable wireless on the BT Hub, as my computer is permanently connected to it by cable (I have no other wireless devices).
    The help page says it's possible (Wireless Configuration under Advanced Setting - simply set wireless enable to 'no'), and in fact I successfully managed to do this just after I installed the hub (the wireless blue light went out as expected).
    Today, however, I noticed the blue wireless light back on (I hadn't changed any settings), and the option to disable it (in Advance Settings) is no longer available. I wonder if the upgraded software (it automatically upgraded itself yesterday) has removed the option to disable wireless (and if so, why)? I phoned technical support. They insisted that the default is wireless-enabled and that I can't change it, and that it's always been that way. This contradicts both the help pages and my own experience immediately after installing (not to mention common sense). But they were insistent.
    So, I tried something else: Power Save. In theory this seems to do the trick - it turns off wireless, but lets me continue with broadband connection via ethernet cable. Only problem is that you have to schedule it. You can't have it running in Power Save mode all the time. What a pain. In practice it means that even if I schedule Power Save from 04.00 to 03.30, I find that when I turn everything on at the mains in the morning (around 9.00) it's not in Power Save mode. I have to set it to go into Power Save mode at 09.30 (you can't just switch Power Save mode on - you have to schedule it as an event in the future).
    Any suggestions? Many thanks in advance.
    Solved!
    Go to Solution.

    @BMD
    You may find that the update has reactivated BTFon. (Customers before a certain date had to opt in to this service but new customers are automatically opted in to BTFon so may not be aware of this).
    If you never had BTFon then in theory you still shouldn't have it. You could check if you want by either using a wireless enabled PC and searching for signals or check your status on the BTFon site.
    If you are a member of BTFon then you can opt out from their site. It will take upto 48 hours for the request to be carried out. From there the ability to switch the wireless off should come back.
    A fix which is a pain if you've set your hub up to how you want it is to do a factory reset thus removing the latest firmware update and putting the wireless turn off ability back into your hub.
    -+-No longer a forum member-+-

  • WRT610N-ver2 - Network Mode N-only disables wireless security

    WRT610N-ver2 - Network Mode N-only disables wireless security
    Firmware 2.00.01 build 15  Sep. 13, 2010
    When I set Newtork Mode to N-only, the wireless security turns to DISABLED & can only be re-eneabled by returning to MIXED mode
    Same thing on both bands.

    Try to re-flash the firmware of the router once again. The re-flash process means that you will be updating your firmware with a version that is similar to the one that you are currently using.  A firmware re-flash will help in fixing the script of your device’s current firmware. After re-flashing the firmware reset the router. Here is the link for resetting the router: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=eaa3127db5f4402584c959a7251e754c_4008.xml&pid=80&r...
    After the process try to reconfigure the router again and then check the status..

Maybe you are looking for