Itunes 10 does not 'see' my iphone after upgrading my Imac to Snow leopard

Hi,
I just upgraded my iMac to Snow Leopard 10.6.3. When I plug my iphone (4) (USB), Itunes does not sync my phone, and it does not even appear as being connected to my iMac. I dont have any other issues.
I should add that I always have connected my Iphone through the USB on the keyboard, as I dont have enough USB slots in the back. This has worked just fine in the past. The keyboard is wired.

Try plugging it into one of the USB ports on the Mac itself and see if that works.

Similar Messages

  • ITunes does not recognize my Iphone after I tried to unlock it

    I tried to unlock my iPhone with redsnow but smth went wrong and now it sais conect to iTunes, but iTunes does not recognize it. iPhone is stuck in conect to iTunes picture.

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone - http://support.apple.com/kb/HT3743.

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • Update to 10.0 failed.  iTunes does not see my iPhone.

    I removed iTunes from my computer and downloaded the update, but my phone is showing that I need to connect to iTunes. Does anyone know what may have gone wrong?  Thank you!

    Your profile says you are using OS X 10.6.3, which is a version of Snow Leopard.  Snow Leopard was first released nearly six years ago.
    The current version of iTunes, 12.0.1, is needed to interface to an iPhone 6.  OS X 10.6.3 is too old to run this version.
    So you must update/upgrade your operating system to obtain the latest version of iTunes.  The current version of OS X is 10.10.1 (Yosemite).

  • HT201263 itunes does not recognize my iphone after update

    First I had Trouble installing the latest Itunes Update, then I had to delete Itunes from my computer and re-install it. Now, it doesn't recognize my Iphone and I can't sync. What do I do now?  Yes, I have an older Iphone (3GS) but, what the ****!
    Any Ideas, Anyone?
    Thanks
    FurrfaceOK

    Hello FurrfaceOK,
    The following article provides troubleshooting that can help get iTunes to see your iPhone.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • New Iphone 3G - Army Laptop - USB Disabled- ITunes does not see Iphone

    I have a new Iphone 3G and am trying to sync up my Outlook Address Book, however my computer is a US Army Laptop that has the USB disabled. The XP operating system recognizes the device as a camera but ITunes does not see the Iphone. Any suggestions or am I out of luck?

    You will have to use a different computer that isn't from DoD. As you know they have disabled USB ports except for mice/keyboards because of various world wide issues, they are being very strict about this and I don't see them enabling it for an iPhone when they wouldn't let me use them for 5 minutes to get some data from an old dying machine.

  • ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
    That sounds like the probable cause you cannot add contacts.
    Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps).  Also contacts sync has nothing to do with iCloud behavior.  The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere.  Specific syncs are not relevant.

  • TS1538 after a restore, the itouch screen has a "USB arrow to iTunes" picture.  Now iTunes does not see the itouch and my itouch is non-responsive

    i was restoring my itouch and after completed, the itouch screen has a "USB arrow to iTunes" picture.  Now iTunes does not see the itouch and my itouch is non-responsive

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

    hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

    You may need to put the iPad in recovery mode to restore it.
    http://support.apple.com/kb/HT1808

  • ITunes does not 'see' iPhone in new iMac

    I am not sure if I should post this in the iPhone Forum or here ... but I just bought a new 21" iMac and used the Migration utility to copy all my data over from my MacBook. It seems to be fine and everything is working correctly BUT ... when I plug in my iPhone it does not show up in iTunes. I did go into iTunes and "authorize" my new computer ... buy it still does not see my iPhone.
    I am sure there is a simple answer to this but I can't figure out what it is.
    Thanks for your help!!
    Mary in Charlotte, NC

    Check your System Profiler and see if the computer is recognizing the phone in there (if it's not, try a new cord). If it is, login to another User account and see if the iTunes in there sees the phone. If it isn't,you might try reinstalling iTunes.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)

    Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)
    Are others having the same problems?

    Try this. Worked for me.
    - turn off your router
    - turn off you Mac's after removing all available printers
    - turn off all iDevices
    - do a factory reset of your printer remove all cables min. 30 sec.
    - turn on your router first
    - ran the network set up wizard
    - give your printer also a new name like "DeskJet 2015"
       Something which you don't have used before.
    - turn on your Mac's and add your printer
    - turn on your iDevices at least.
    Should work after these steps.
    It worked for me including all iDevices.
    iOS and Yosemite

  • When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

  • My iTunes will not recognize my iPhone after iTunes was updated.

    my iTunes will not recognize my iPhone after iTunes was updated. what does that mean?
    <Re-Titled By Host>

    Hello mzshay2u2,
    Thanks for using Apple Support Communities.
    From your post I understand that you're unable to locate your iPhone within iTunes 12 on your Mac.  First, I'd like you to take a look at the screenshot below, as iTunes 12 changed the navigation of your Library.
    Sync your iPhone, iPad and iPod with iTunes using USB
    If you do not see your iPhone's icon there, then continue on to the link below.
    iOS: Device not recognized in iTunes for OS X
    Cheers,
    Alex H.

  • Itunes does not see ipod touch

    Upgraded Itunes11.0.0.163 for Windows 7 64 bit.  Running on Asus Laptop.  Windows 7 Ultimate 64 bit.
    Itunes does not recognize ipod toch Gen 4 updated to ios 6
    Totally uninstalled and manually cleaned all itunes software several times.
    Reset iPod touch offline several times.
    Updated iPod touch driver.
    WIndows ses the iPod as portable device, iTunes does not see it. 
    Any ideas on why I can't use iTunes with my touchi?  Has anyone hadluck with non apple softyware, seems apple has made a mess of itunes on this version.  I've been throught multiple threads on reinstalling and with tweaks.  I've read the apple device is faulty in this latest version, any news on when this fault will be fixed?  Love to hear from an Apple person on this.  Samsung is looking more and more attractive.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I updated to iTunes 10.7 and now iTunes does not see my iPod Touch.  It says the Apple Mobile Device USB Driver cannot be installed.

    I updated to iTunes 10.7 and now iTunes does not see my iPod touch.  After the update I got a message that the Apple Mobile Device USB Driver could not be installed.  I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem.  I have followed the suggested fixes in Apple Support.   Any suggestions?  Thanks!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for

  • SM35 Re-processing of Incorrect/Error session in Background Mode

    Hi all, I am trying to reprocess a session in SM35 which is in Error status. Here I am a facing an issue, if I reprocess this session in background mode then it says that Batch input data is not available for a screen which is already processed. Idea

  • D-Link Dir-615 internet problems

    Hi All, I am not posting this for help. I came across a problem and could not find any help on the net that would solve it. So this is to help anyone whom might have similar problems. First, let me give you the scenario. I have SBC DSL as my ISP and

  • Can remote developers connect to a CF host

    Our LAN has a small server with CF and a SQL Server database and our Flex projects are set to ColdFusion Flash Remoting Service. The server has a fixed IP, but at the moment this is only linked to inetpub. We now have a developer with Flex Builder on

  • I have 170 go of memory left on my hard disk but it tells me that the disk is full and I can't save anything. What to do?

    I have a Macbook pro and a new hard disk was installed last march. Today, I have a message telling me that my disk is full and that I can't save anything. But when I checked my disk to see if I have any space left, it shows 170 go of free space!!! I

  • Jms Protocol error

    Hi , I am using Oracle 10g version 10.1.3 and Oracle AS JMS Server I have a java client that is using the following configuration for JNDI conext. // set the environment properties env.put(Context.INITIAL_CONTEXT_FACTORY,"com.evermind.server.rmi.RMII