Itunes 10 errors during installation with ipodservice error message

I have been trying to get itunes 10 installed for weeks. The upgrade would not work normally, so I removed itunes/quicktime/safari and decided try installing fresh.
I still get a error during the installation process saying that ipodservice.exe cannot execute instruction at 0x7c91b21a referenced at 0x0000000010. memory could not be 'written'
does anyone know how to fix this?

i'm getting a similar message. running Windows XP with Symantec AV

Similar Messages

I bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom

i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also

Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
1) Ensure the device is powered off.
2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
4) When the restore screen appears (exclamation mark), release the Volume Down button.
5) From the restore screen, press then release the following keys to initiate the reset process:
1. Volume Up button
2. Volume Down button
3. Power button
4. Volume Down button
*Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
-KristieQ_VZW
Follow us on Twitter @VZW Support

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

Error during installation with xp sp3 ie8

message error is registation is not possible. i have administrative permission. i have correct with subinacl and reset_fp11.bat. but i have the same error.

Can you try installing from the stand alone installer? If it still fails, please let us know the exact error message.
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

1603 - Fatal error during installation

Hi all,
3 days ago I got Adobe Creative Cloud with access to all Apps in the Creative Suite. After downloading the Adobe Application Manager I commenced downloads/installs of each of the apps. Nearly half of them have come back saying that "Installation completed although some optional components failed to install correctly.
After hitting the hyperlink of "more details" I get this:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Microsoft_VC90_CRT_x86 1.0.0.0 {08D2E121-7F6A-43EB-97FD-629B44903403} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x8007054F.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x8007054F.
ERROR: Third party payload installer Microsoft_VC90_CRT_x86.msi failed with exit code: 1603
Two questions. What do I do from here to ensure that all problem installations are rectified? And is this error code a minor or major issue?
Thank you,
dropbear1990

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

1603 fatal error during installation-L7680 all in one printer

I continue to get this error because the installation finds newer software and quits. I have completed the MSI error 1603 solution 16 page paper for windows XP and was unsuccessful. I then used CCleaner to clean all registry errors, and that still didn't work.
Is there a quick fix to get past this error and install the latest scanner software on the HP site? I can print with this printer, but can not see it on the network nor use the scanner.
Best regards,
Ed

Hello @charleydog
Welcome to the forums
I read your post about the Fatal Error 1935 you're receiving when installing your Photosmart C4280 on your Windows 8.1 system.
I have located a specific document for this certain error you are seeing. I would suggest checking out the guide and trying out all of the steps it recommends to resolve the Fatal Error issue.
Fatal Error 'Error 1935. Fatal error during installation.' (MSI Error 1935) Displays During HP Softw...
I hope this helps you!
Have a terrific weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

TS5376 When I try to remove "Apple Mobile Device Support" I get a "Fatal error during installation" message. I have windows XP

The program will not start because MSVCR80.dll is missing. I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work. I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.

First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Itunes 7.6 installation Fatal Error during installation

I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

Itunes: Fatal Error During Installation

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted and when I tried to open up iTunes(after restarting), a little window came up saying:
+Preparing to install...+
Then after a minute or two it said: +Please wait while Windows configures iTunes+
Then another window pops up saying:
+*Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. *+
+*Verify that you have access to that directory.*+
and I have no idea what that means so i closed it then a pop up shows saying: +Fatal Error During Installation.+
WHAT DO I DO?!?!? please help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

Try first going through this article to remove iTunes and Quicktime completely (http://docs.info.apple.com/article.html?artnum=93698).
After you remove everything, don't re-install yet. Download the Windows Installer Cleanup Utility (http://support.microsoft.com/kb/290301). After insalling that, remove any references of iTunes, Apple, or Quicktime in the list.
Try re-installing now.

"error during installation" 10.3 with iMac G5 Please Help

Hi there, I have an iMac G5- the first iteration 17". I am preparing to sell it so I used disk utility off of the original OSX DVDs (or CDs) that came with the computer to erase the drive and do the 7 pass overwrite. I have subsequently tried to reinstall the original OS (10.3) and I get the same error every time. "There was an error during installation. Please try again."
I have tried repairing disk permissions, and repairing the disk. They execute succesfully (after a restart) and yet I receive the same error message. Can someone please help me. Thank you in advance for your time.
-Eric

This indicates you are upgrading to 10g from some previous Oracle version. It also indicates your libraries either do not exist or exist in a location that the new installation is expecting to see them (in this case look at where you have your lib and lib32 specified at)

Itune doesnt install showing error during installation of assembly ''Microsoft.VC80.CRT,type=wim32'',version=''8.0.50727.6195''.publicKeyToken=''1 fc8b3b9a1e18e3b

itune doesnt install showing error during installation of assembly ''Microsoft.VC80.CRT,type=wim32'',version=''8.0.50727.6195''.publicKeyToken=''1 fc8b3b9a1e18e3b

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

Try:
iOS: If you can't back up or restore from a backup in iTunes

I can't update, I keep getting a "Fatal error during installation. Error 1603" message

I can't update, I keep getting a "Fatal error during installation. Error 1603" message

ireeeeen wrote:
Oh it's from photoshop elements 5.0
hopefully you can answer my question
You'll have more luck in the Elements forum:
http://forums.adobe.com/community/photoshop_elements

Itunes 10 errors during installation with ipodservice error message

Similar Messages

Maybe you are looking for