ITunes 10 Installation Error: Windows Installer

I'm sure this is a common issue, but I have yet to even solve this problem and I am in need of assistance. Topic with same issue: http://discussions.apple.com/thread.jspa?threadID=2599360
I have uninstalled a previous version of iTunes to upgrade to iTunes 10. When I finished downloading it, I go into the installation process. Right in the middle of the installation, an error message pops up with this:
+*There is a problem with this Windows Installer package.*+
+*A program required for this install to complete could not be run.*+
+*Contact your support personnel or package vendor.*+
I've tried many solutions while I lurked the internet:
-Run As Administrator
-Installed the Latest Updates
-Updated Windows Installer
-Cleared Unworking Registry Files
And some I may have forgotten, but I'm sure I covered all of it.
I'm still given the same issue after all that.
Is there something that still needs to be done?
I'm running on an Acer laptop with Windows Vista.

Thanks for the help, polydorus!
But now I have another issue.
Before I had the iTunes problem, my sister gave me her iPod Touch 3G, which has been synced on her laptop before. I resetted via the Reset Options in the iTouch, then after a reboot, it came up with the iTunes Logo, a +, with the USB iPod Connector. So, I did what it said. I pulled up iTunes and plugged the iTouch in... The iPod Touch doesn't appear on the list. I tried unplugging it and putting it back in, resetting iTunes... then I upgraded iTunes, and now I'm still having the same problem.
So, my question is now... How can I get iTunes to find my iTouch?
I tried uninstalling Apple Mobile Device, but unsuccessfully uninstalling it, I repaired it after being able to upgrade iTunes. Could that be an issue?

Similar Messages

  • Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

    When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

    What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

  • Itunes 10 installation error -  Windows installer package

    When I try and install I tunes 10 i get this error. "There is a problem with this windows installer package a program required for this install to complete could not be run. Contact support personnell or package vendor"

    I also had this problem, and looked at variatent solutions such as clean unistalls and DEP conflicts within windows itself.  I even talked to the genisus team at my local apple store!! all were'nt able to solve this problem.
    However, i done some research into the problem and realised that the problem was with the Apple Update software that is downloaded during install. 
    so i ran the udate program thing that the computer wants to update itself and ITUNES INSTALLED!  to do it your self before you upset your registery is go to-  C:\program files\apple updates and double click on the blue globe icom and in my circumstance itunes installed.  I hope this helps and i hope Apple would offer me the job better that their own tech guys.

  • HT1926 (iTunes) Problem with Windows installer package?

    (iTunes) Problem with Windows installer package?  I try to install the new version of iTunes but get an error "Problem with Windows installer package.  A Program required for this install could not be run."  Can anyone help shed some light for me as to how to correct this?  I have tried to install the program through Chrome, Explorer and FireFox but have had no success.  I have included a screenshot of the error.  Hopefully it's visable.  Thank you for any help.

    Found answer for anyone else curious.  I love the apple community.  Thanks guys for help!
    https://discussions.apple.com/docs/DOC-3551

  • Device Installer error - Windows could not load the installer Image.

    I am windows XP and have loaded new Itunes 7.7 and the Iphone 3G I just received cannot be recognized by my PC/XP I get a dialog box saying
    Device Installer Error
    Windows could not load the Installer Image. Contact your hardware vendor for assistance.
    OK
    Of course it is not OK hence why I am here seeking help from this fine community of users of superior Apple products

    Deleted Itunes, Quicktime, apple mobile support and updater. Reinstalled and it all worked. Had to do the same thing last time. NOT TOO FUN.

  • I need help getting past the installation error "windows cannot fint TEMP file"

    I need help getting past the installation error "windows cannot find TEMP file"

    Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
    http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
    http://www.compusa.com/products/product_info.asp?product_code=339900#ts
    http://www.xpcgear.com/ide2sata.html
    http://www.ubuyitdirect.com/-p-1045.html?currency=USD
    http://www.satasite.com/sata-ide-converter.htm
    http://www.pcgears.com/default.aspx?oid=187150
     

  • Microsoft Office Customiziatoin Installer : Error during installation, file:///c:/Program Files (x86)/Microsoft Visual Studio Excel 2013, Windows 7 64 bit

    How do I get ride of the Microsoft Office Customization Installer  Error during installation, Name:  file:///c:/Program Files (x86)/Microsoft Visual Studio     From:  10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
    Downloading file: :///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed
    Details: 
    Name: 
    From: file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
    ************** Exception Text **************
    System.Deployment.Application.DeploymentDownloadException: Downloading file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed. ---> System.Net.WebException:
    Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.Net.WebException: Could not find file 'c:\Program Files (x86)\Microsoft Visual
    Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.IO.FileNotFoundException: Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
    Boolean checkHost)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       --- End of inner exception stack trace ---
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
       --- End of inner exception stack trace ---
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       --- End of inner exception stack trace ---
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

    I discovered the cause of this problem. I had pointed my "My Documents" folder to a NAS drive that I had rather than my C drive. Apparently Photoshop was dependant on it being on the C dirve. When I  repointed this back to my C drive CS5 installed properly.

  • TS1814 My phone doesn't have enough GB to update directly and when I Go to ITunes an error window comes up to tell me make sure my network settings are correct and active? How do I fix this to upgrade my phone .

    My phone doesn't have enough GB to update directly and when I Go to ITunes an error window comes up to tell me make sure my network settings are correct and active? How do I fix this to upgrade my phone .
    <E-mail Edited by Host>

    Hi Diesel vdub,
    Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

  • I can't install Itunes because of Windows installer package error, please help!

    I tried installing Itunes for a long time on my desktop, I'm running Vista. Everytime I try to install Itunes it runs for a bit, then gives me this message
    " There is a problem with Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    I went through many posts on how to solve this problem, I uninstalled and deleted all the files from this thread : http://support.apple.com/kb/HT1923
    and tried to reinstall Itunes, didn't work, same error message.
    After i tried to install Itunes in Clean boot still didn't work.
    I also downloaded MicrosoftFixit.Program which apperantly fixed this problem for some people, not for me.
    Then I extracted Itunes and tried to install all the components seperately, everything installed correctly, however when I tried to install Apple Software update
    I got the same error message, i think it is the Apple software update that is causing this problem but I have no idea how to solve this problem.
    How do I solve this, any thoughts or suggestions???

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    Now, uninstall Bonjour from Control Panel.

  • Unable to install Itunes, Win-XP, Windows Installer error 1722.

    When I install itunes on XP-SP3 (fully updated) with Windows installer 4.5 - I get this message half the way through -refer to attachment-
    I have uninstalled all apple products, installed quick time - this installed but still provided the error. I have extracted the package and attempted to install each product seperatly however it provides this error only while installing the Apple Software Update. The error code comes from the event viewer.
    Any help would be greatly appreciated.

    This is a serious error. With out fixing this we cannot install itunes on the system. Any help please. Thank you.

  • ITunes 10.5 Windows installer package error?

    i created windows installer package for iTunes 10.5. The The problem is when i am trying to install package it throws error like "failed to start applemobiledeviceservice". plz give me suggestion how to solve this error?

    There are numerous threads discussing errors with 10.5.0
    can't install itunes 10.5
    ***Fix for iTunes 10.5 Install on Win7 64bit***

  • I am unable to install iTunes due to Windows Installer error message on Vista

    I needed to update my iTunes since I purchased the iPad2.  My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message.  I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."

    I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

  • ITunes 10.5 Error- Windows Installer Package

    Previously, I had iTunes on my computer, but then got rid of it because my iPod got stolen. I now have a new one, but iTunes 10.5 will not install on my computer. When I've tried to install it, right before it was done installing, an error message popped up saying, "There is a problem with the Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I've looked through support topics, but cannot find the solution. Please help.
    If it helps any, my computer is Windows Vista Home Premium.

    Go to support.microsoft.com/fixit
    In section 2 click on: Install or upgrade software or hardware
    Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
    This link may get you there:  http://support.microsoft.com/mats/Program_Install_and_Uninstall/
    Let it run and then try to download it again

  • Error 1606 iTunes crashes at windows installer.. networking problem?

    i run the .exe file and it bring sup the windows installer screen, than it will dissapear for a second and come back with this line "could not access network location" and then there is a directory to My Pictures on my network.. please help

    I have the same problem. Installing Itunes 7 on my XP laptop. The installer comes with the error, then no choice but to quit the installation. It's even a network share I haven't used in a year. What's the solution please. It's driving me mad... I really need to install this.

  • Itunes: Fatal Error During Installation (it wont download at all) HELP!

    Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
    +*Preparing to install...*+
    Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
    Then another window pops up saying:
    *+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
    *+Verify that you have access to that directory.+*
    and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
    so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
    *+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    +*Verify that you have access to that directory.*+
    Then after this i went to the folder
    +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
    WHAT DO I DO?!?!? please can someone help me
    The details for my computer are:
    Microsoft Windows XP
    Professional Version 2002
    Service Pack 2

    if it helps at all...
    I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
    and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
    ...is there any possible way that anybody can help me out with this.
    any help that anyone can offer is very greatly appreciated,
    Please & Thank You.

Maybe you are looking for

  • OS X Lion installed, want OS X Snow Leopard on External HD

    I upgraded to OS X Lion (which I love), but I would like to install OS X Snow Leopard on an external hard drive. Unfortunately after inserting the Snow Leopard disk, I am receiving the message: "You cannot install this OS with the current OS you are

  • Aspect ratio is wrong ! please help!

    Ive just made an animation in after effects. the comp is set to pal dv wide screen 1.46 when I bring this into fcp its in 4x3 I ticked the anamorphic box but nothing has append! what am I doing wrong? thanks for any help

  • DFF segment Issue

    Hi All, I have added a new attribute to existing DFF in standard forms, and that DFF is there on standard OA Page. But the newly added attribute is not visible on OA Page. pls Help Regards, Raghava

  • Jam pack content error, any ideas?

    Just did a re-install of Logic Studio, and all of the supplied content. When I make a new software instrument track and select a jam pack preset sound from the library browser, it loads the sound just fine, but when I try to select another sound it s

  • Blogging using iweb

    Hi I am thinking of moving my wifes site to iWeb. I setup a test account for her and she is currently updating a couple of pages to get a feel of the software. All in all she quite likes it. We are going on holiday in October and she would like to be