Itunes 10- Song List View is just a black screen!!
I recently updated to itunes 10, initially it was working fine. Today, my computer bugged out while shutting down and I had to hold the power button on it. When it rebooted I scanned for viruses, errors, adware, etc... I have re-downloaded itunes and selected the 'Repair' option, but it did not help. I have made sure I am up-to-date on both itunes and quicktime updates. I have not seen any similar problems such as this while searching the internet, so I am posting here. If I hit the play button it will still play the songs from whatever playlist I am currently in, and the grid view works, but when I want to view the song list (which is the way i always use my itunes) it just turns the window within itunes, the window that has the song list, completely black. This happens for all of my playlists, recently added, full music collection, any playlist that can be viewed using the song list view. Is there anyone who has also experienced this? What can I do? It took me over 10 hours to create this playlist with the large amount of music I have and I would not be happy to have to sit there an go brain dead again creating it.... please help!
Tylerdowner, as a moderator, one would think that, prior to adjusting comments/solutions, especially when not having a Mac, you would do more research (bet you know someone with a Mac, to duplicate problem), or pass responding on to a moderator who does have a Mac (I am amazed that you are even a moderator on Mac problems/situations, if you only have access to a PC). Had the solutions above worked, I would not have needed to figure out another solution (we all know the newest release of anything is the most secure). Finally I am open to any fixes (tested) that you can provide, that improve upon mine. As a moderator, maybe you have pull with the Foxtab and/or Adobe people to get them to work out compatibility, and lastly, maybe add a warning at the Foxtab add-ons page, after verifying the problem yourself, with an associate's/friend's Mac.
Similar Messages
-
ITunes purchased shows do not playback just a black screen
My wife and son are leaving tomorrow to ME. We purchased ~1$12 worth of shows. They playback in iTunes application but do not playback on her iPod video 30GB and she is running 1.1.2 firmware.
You can select the video and feel the drive queueing it up but just a black screen is displayed. I have other videos I have converted myself and they work fine.
Any ideas on what causes this?bump
-
ITunes top songs lists, calculation?
Does anyone know how iTunes "top songs" lists are calculated? Obviously they measure downloads, but over what time?
Also, there's one listing on the "portal" page of my country's iTunes store, but when I click it, songs are listed in another order. When checking the web site (with top songs by country), there's still another list. Why the differences, and which one is correct?
A related question: is it possible to see the number of downloads for a certain song?
Thanks!Slightly more automated method:
Drag in the new song titles from the Store.
File > Display Duplicates.
Sort by Date Added. All the ones that are dupes and have a Buy button will now be together. Click the first, hold Shift, click the last to highlight the whole row, then Delete.
File > Display All. At this point, the remianing ones with a Buy button are known not to be dupes.
Since they are still sorted by Date Added, all the remaining ones with the Buy button will be together, and you can buy them!
Try this out with 8 or 10 new songs, including some that you know you already have and some that you don't. Give it a test before you do 200 songs.
Let me know! -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
We got a new computer so i plugged my Iphone4 in, nothing happened so i unplugged it now its just a black screen with the itunes icon & Usb and i cant turn it off or get on anything?
PLEASE HELP!Plug in your phone and launch iTunes on the computer. Then in the sidebar look for something about an iPhone. Click it and set up your iPhone. Has this iPhone ever been synced with another computer?
-
Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!
You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
My iphone 5c screen went out and its just a black screen ive tryed a hard reset and nothing still when i plug the charger in it dings every few secs and ive hooked it to itunes and restored it still nun do i need to buy a new screen or is something else wrong?
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
TS3354 I downloaded a movie but when I play it, it's just a black screen
I downloaded a movie on my iPad but when I go to play it, it's just a black screen. The whole entire movie is just a black screen.
Hi, Ktjayne05.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test playing the movie after processing these steps.
If the movie still displays a black screen, I would recommend deleting the movie and downloading it again free of charge by accessing your purchases via the iTunes Store.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Hope this helps,
Jason H. -
Safari has no graphics just a black screen
Safari has no graphics just a black screen,
This is from launch, the button and window frame are ok but the text look a bit odd on the bookmark bar and the url field is black and the content of the window are just black. I have reinstalled it with a fresh copy from apple.
HelpThis is from launch, the button and window frame are ok but the text look a bit odd on the bookmark bar and the url field is black and the content of the window are just black.
Okay ... that is usually caused by a problem that also makes the iTunes Store go black too. So even though Drgoo's post about fixing it in the following post is about fixing the iTunes issue, fingers crossed it should also help with your Safari problem too:
http://discussions.apple.com/message.jspa?messageID=10390276#10390276 -
The picture app won't open and when it does it's just a black screen. I have pictures saved buy I can't view them. Please help.
Try to Reset your device.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).
Web links to the user guide came with the iPhone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
You can also download it as a free iBook. -
N97 camera won't start(just a black screen)
My N97 camera won't start just a black screen this issue since the update to the new firmware
ooooooooops so sorry about this, here it goes and start with the first code.
With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My camera is not working, just a black screen, won't take pics please help
WWhy won't my camera take pics..just a black screen ?
CClose the camera app and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
Maybe you are looking for
-
My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer. They were working before and for many years. All of a sudden, A pop up win
-
DIfferent screen search fields in Purchase Order and Shopping Cart
Hi, I created a field in MDM and associated it in OCI , in order to appear in SRM , in the Catalog Search screen in the Purchase Order. But, the field also appears in the search screen in Shopping Cart. Do you know if there is any way of limiting the
-
Can't print directly from FMPro 6 since upgrade to 10.4
I have numerous computers but PC and Mac on a network, all peer to peer using FMPro 6 as a common database. I have never had difficulty printing fron FM Pro until I started using Mac OS 10.4. Now, most Macs with 10.4 has to print to pdf, then print t
-
Links donu00B4t work in mail forms(Mailing Campaign)
Hello, We have created some links in a mail form and when we execute the campaign, the link doesn´t navegate to the URL. The code is as follows: href="/exchweb/bin/redir.asp?URL=http://www.efeservicios.com It happens the same with a sound link, the p
-
Clients not connecting with AP 1600 after configuration
Hi there!! I'm configuring a new Aironet 1600. I have to configure two SSIDs: Emplyees (vlan 40) and guests (vlan 45). Authentication for Employees is 802.1x against a RADIUS server and Guest is just WAP2. I'm trying to test the AP with the guest SSI