ITunes 11.0.2.26 Hangs On Startup

Ok, don't know when this started happening, but it's really frustrating.  Now before you ask me, if my computer meets the minimum requirements; trust me when i say it's MORE than enough
Now i have itunes installed on my SSD as well as my music being on an SSD as well (not the same ssd)
Now what happens is, whenever i start up iTunes on my PC i will just see a trasparent window for 10-15 seconds before it loads (now on my laptop, which also has an SSD and is on the same version of iTunes, it opens up instantly).
I have read over another post regarding the same issue and the ONLY thing that works, is if i disable my network adapter, magaiclly iTunes on my PC opens instantly as well.
I don't know how to fix this issue and why it only happens on my PC and not my laptop, anly help would be much appreaciated.

I uninstalled then reinstalled.
Even used "everything search" -a free tiny program- to positively ID all ".itl" files from my PC
and subsequently deleted.
New install shows same bogus songs anyway.
I've spent too much time with Apple.
Farewell forever.
-user

Similar Messages

  • Itunes is hanging at startup how do I fix?

    Itunes is hanging at startup message cannot find ~ amazon url

    Hi,
    Try a Reset of the Phone...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See the Information in this Link:
    Device Frozen
    http://support.apple.com/kb/ts1445
    Cheers,

  • ITunes 10.5 hangs on startup if Personal Hotspot is enabled

    Hi,
    I've seen lots of people reporting Itunes hanging on startup but i've not seen anyone mentional the Personal Hotspot feature in relation to this.
    On my particular phone/laptop the following is reproduceable 100% of the time.
    Connect iPhone to laptop with Personal Hotspot disabled, iTunes starts ok.
    Connect iPhone to laptop with Personal Hotspot enabled, iTunes hangs on startup.
    I have an iPhone 4 and iTunes 10.5.3.3
    Martin

    It's been 2 days and I still haven't found a fix. I can't sync my iPhone or iPad, nor can I access any of my media through iTunes. It's becoming really frustrating.
    I have discovered that if I disconnect from the internet then I can access iTunes, or if I create a new blank library I do not suffer the crash. However, internet access is critical for me and my library contains 30,000+ songs and over a hundred playlists, and the idea of rebuilding that from scratch is frankly very very unappealing.
    If anybody has any other solutions I would be incredibly grateful if they would share them.

  • Firefox stopped working and hangs upon startup

    First, a problem with iTunes - could not access the iTunes store. Uninstalled iTunes and re-installed, then Firefox hung up, had to close with Task Manager. After that Firefox hangs on startup. Have uninstalled and re-installed Firefox, still hangs on startup. Using Windows 7 OS.

    Firefox will not load to start in safe mode - it is just a blank white screen with no radio buttons or icons on it and the circling icon for loading.
    I deleted my old profile and uninstalled Firfox and tried downloading again, but the same problem exists. I am currently using IE as my browser, but prefered Firefox (when it worked). It seems the new version is the problem.

  • 10.4.1  hangs after startup - 64-bit Win7

    I tried reinstalling iTunes as my CDs were not showing up in iTunes.  The system is Windows 7 Professional 64-bit.  Now iTunes hangs at startup . . . all I see is the beginning of a translucent window.  I've uninstalled, reboot, reinstalled many times. 

    Bump. Also an update: I found out that iTunes doesn't hang all the time when I tell it to close, only when I have the visualizer going, not in full screen mode. Hope that might help anything.
    Thanks,
    Carter

  • WebLogic 10.3.2.0 hanging at startup after "The server log file is opened."

    Hi,
    A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
    "The server log file <log file dest> is opened. All server side log events will be written to this file."
    I think the next line should be:
    "Security initializing using security realm realm."
    Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
    Following is written to the log file:
    ####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
    WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
    Listen Address          :7001
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
    ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
    Thanks!!

    tried both of these, still having same error as below:
    <Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    <Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Truncated. see log file for complete stacktrace
    >
    <Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Pls help me out ASAP...

  • Firefox 31 hangs on startup with no error messages

    Simply put, Firefox hangs right on startup. I see it loading the two generic tabs and then the wheel spins and then it says 'Not Responding' on the top of the window. I have to force close it each and every time, and I've also tried the following solutions in no particular order to alleviate the issue:
    1) Ran SuperAntiSpyware and Malwarebytes last night for any possible infections. Reported back with nothing.
    2) Booted my laptop up in Safe Mode (with networking) and still couldn't get it to operate.
    3) Performed several clean uninstalls and re-installations which also included clearing out the profiles altogether and then trying to open it again, nothing.
    4) Booted up Firefox by holding down the shift key and resetted it to its default settings and then tried firing it up again. Nothing.
    5) Attempted booting up FF in Safe Mode with the shift key, nothing.
    6) Created a new profile and tried booting FF, nothing.
    7) Read this article http://kb.mozillazine.org/Firefox_hangs#Hyper-Threading about Hyper-Threading and followed the instructions which got it to operate, but I can't access the toolbar or the option menus. When I click on options Firefox closes with no error messages. I have a feeling this isn't the issue at hand but I figure I'd try it and at least I can get it to fully load and not hang.
    8) Deleted all Firefox extensions and Plug-ins, nothing.
    9) Enabled Firefox through firewall and antivirus settings, nothing.
    10) Updated my BIOS firmware as suggested in #7, nothing.
    I've done almost 10 different things and I still can't figure out why Firefox keeps hanging on startup. I've looked into Youtube videos for tutorials and others posted about the Java crashing that was happening in an earlier version of FF. Since its not crashing, I'm unable to look into the crash logs and pinpoint a crash number or anything because it just freezes and when I click to close it I get a message saying: 'Close program' or 'Wait for it to respond.'
    I'm running a 64 bit Windows 7 on an HP Pavilion g6-1c44wm Notebook PC
    Microprocessor 2.10 GHz Intel Pentium Processor B950
    Microprocessor Cache 2MB L3 Cache
    Memory 4GB DDR3 SDRAM (1 DIMM)
    Memory Max Maximum supported = 8GB
    Video Graphics Intel HD Graphics
    Video Memory Up to 1696MB
    Hard Drive 500GB 5400RPM)
    I'm trying to be specific as possible! Please help! I'm at the end of my rope here!

    Try to completely uninstall firefox, that means to '''delete''' the [http://kb.mozillazine.org/Installation_directory#Windows Installation directory] located for your 64bit in C:\Program Files (x86)\Mozilla Firefox\ , also, '''delete''' the C:\Users\<username>\AppData\Local\Mozilla\Firefox and '''if exist''', '''delete''' the C:\Users\<username>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox.
    then download and install again a new full installer from : https://www.mozilla.org/en-US/firefox/all/
    disable firewall and antivirus and antispyware for a little bit, and run firefox. any luck ?
    thank you

  • 10.7.4 Hanging at Startup

    I don't often find the need for these forums, but I've got a tough one this time. Here's my issue:
    I was recently using my late 2008 MBP (6 Gig RAM, 500 Gig HD) without issue as I have done for the last several years. The other night, I was running my DJ software (Traktor) which worked fine all night. I ended the night and shut the lid on my MBP, the next day, Traktor was still shutting down (as it does on occasion). I gave it a few minutes, but it seemed to have crashed so I force quit the program. Things seemed to be running slow so I restarted. When I did, my system hung on startup at the gray Apple screen with the spinning wheel. After many days and many, many troubleshooting routines, I'm STILL unable to make this go away permanently. Here's what I've tried:
    (I've always been able to boot in Safe Boot mode, so that's how I've been doing maintenence)
    Initially, I thought this was probably related to my DJ software so I uninstalled it (including manually uninstalling all extensions and preferences).
    That didn't work so I started cleaning out my system (I haven't done a fresh install of OSX since like 2005, so it was probably time anyways). Still, no luck.
    I reinstalled 10.7.4. Success, but only for the initial startup. A subsequent reboot and I'm back at the stalled startup.
    Try removing more stuff from the system to no avail.
    Wipe hard drive completely, reinstall OS X. WORKS!
    So, I start migrating things back over from my backup (I used CCC instead of TM because I wasn't sure of the integrity of my TM backup). Things seem to be going OK.
    Reinstall Messages beta and restart. NOOOOOO. Back hanging at same place.
    I figure it has something to do with Messages, so I Uninstall the Messages beta. Still hanging at startup.
    Getting really frustrated now.
    Time to try a blast from the past: Applejack. Yes, I know, it's not officially supported under 10.7, but low and behold, cleaning caches gets me back in business--but only for one reboot. Then I'm back at a stalled startup until I clean the caches again (and it's the system cache, not the user cache).
    I tried resetting the SMC and the PRAM and then immediately cleaning the system caches. That again gives me one good restart then back to the hanging startup. And, that's where I'm at now.
    I'm absolutely stuck. I literally have not experienced this kind of issue in at least five years, so I could really use a hand on this one. The last log entry that I'm getting on the stalled startup is this:
    6/28/12 11:25:39.364 PM ntpd: proto: precision = 1.000 usec
    Then it just hangs forever. The spinning progress wheel just freezes. I left it sitting overnight at that screen, so I'm 100% sure that it's not going anywhere.
    I have a couple of theories on what the issues could be, but at this point, I'm totally open to suggestions. From what I can tell (from watching the logs over the course of several (seems like) hundred startups), it seems like this is about the point in the startup where iCloud is trying to check my user credentials. That said, I could be totally off base with that. Also, although the preceeding log entry seems to come after this on occasion, I'm NOT seeing this entry on any of the startups that hang:
    6/28/12 11:25:38.000 PM kernel: NVDANV50HAL loaded and registered.
    Seems to me that this could be an issue too since that's obviously associated with the graphics hardware.
    So, any help would be greatly appreciated!

    Something you haven't mentioned is whether you have tried booting
    from your clone and having the same issues.  Did you try that?
    If it boots and works fine from the clone, then there could be
    a corrupted file trying to be accessed at boot (possible bad sector)
    on the internal drive or it could be that the drive is starting to
    give out.

  • Mac Pro 3,1 (early 2008) RAID card hangs at startup

    Hello,
    I have a Mac Pro 2.8Ghz Quad Core (early 2008) with 10GB RAM and 512MB VRAM.
    I have noticed that the Mac Pro RAID card hangs at startup for RAID volumes. 
    It seems to start okay with a single boot drive (have used both WD Raptor 150GB 10K and Seagate 'factory' 320GB 7200rpm as boot drives...)
    But the RAID 0 array using two factory 1TB WD 7200rpm is what seems to hang at startup.  I have run Disk Warrior, Disk Utility and RAID Utility and found no major errors...
    Any suggestions?  Have already replaced the RAID Card battery with OEM part.
    Thanks!

    Say good-bye to the Apple Pro RAID card. It started its life as a $999 card to support SAS/SCSI and/or RAID5.
    Then the problems with 2.5TB drives, battery, and does it really do something and add to your system.
    I would use SoftRAID and create a 3-drive mirror of 2TB drives instead.
    And an SSD for the system.
    Seems like those are some very old drives.
    I have a lot of the 150GB 10K VR drives, and some 300GB along with older 74GB and a couple of the Raptor series. Loud and while solid I would use for spare boot drives, clone only.
    Backup your data, pull the RAID card, and restore to the drives. And clone the system onto a 250GB $109 SSD. $139 buys a 400MB/sec writes and 800MB/sec reads Samsung PCIe-SSD XP941. None of my SCSI 15K drives would come close.

  • Database Hangs on Startup

    Hi
    We are using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 .
    We Restored the database on Test server from Production by using RMAN .
    The problem is when we startup the database it hangs after Mount phase.
    In alert log file We saw the following eror
    ERROR, tran=19.10.20602, session#=1, ose=0:
    ORA-03113: end-of-file on communication channel
    We removed all the DBLINKS as we thought that could be the problem but the problem was same.
    We found some Pending transactions in DBA_2PC_PENDING and purged all of them (19.10.20602 in the above error was part of Pending transaction)
    But the database still hangs on startup .
    The last entry in alert file inow is
    Wed Aug 17 16:05:12 2011
    QMNC started with pid=19, OS id=2803
    If we leave the database in this mode it will finally comes up with "Database opened" but this is after 6 to 7 hours.
    Ocassionaly we will see the following error in alert log file
    Fatal NI connect error 12170.
    VERSION INFORMATION:
    TNS for Solaris: Version 11.1.0.6.0 - Production
    Oracle Bequeath NT Protocol Adapter for Solaris: Version 11.1.0.6.0 - Pr
    oduction
    TCP/IP NT Protocol Adapter for Solaris: Version 11.1.0.6.0 - Production
    Time: 12-AUG-2011 15:12:37
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12606
    nt main err code: 0
    nt secondary err code: 0
    Please help
    Thanks

    The strange thing is that it hangs on Database mount for long time
    Total System Global Area 584761344 bytes
    Fixed Size 2090792 bytes
    Variable Size 159389912 bytes
    Database Buffers 415236096 bytes
    Redo Buffers 8044544 bytes
    Database mounted.
    and last entry in log file is :
    Starting background process QMNC
    Thu Aug 18 11:13:34 2011
    QMNC started with pid=19, OS id=18043
    But if I use CTRL+C
    it gives me the following in sql
    ^CORA-01013: user requested cancel of current operation
    and in alert log file now I an see "Completed: ALTER DATABASE OPEN"
    Please help.

  • Lenovo A390 hang on startup logo

    Hi there i just bought the Lenovo A390 i insert two sim card in it and when i power on the phone it hang on the startup logo ...any advice for this issues 
    Solved!
    Go to Solution.

    Please help, i have lenovo A390 hang at startup logo... there is no service center here in my city, is there any way to solve this problem?
    i try enter to recovery menu but no luck, how to upgrade / re-install this android phone?
    http://mobilesupport.lenovo.com/en-us/products/a390_smartphone
    Thanks
    Moderator Note; threads merged, link to this thread removed

  • Powerbook Pismo Hangs on Startup HELP!

    I have a G3 pismo that hangs on startup, no matter what I've tried!
    I have tried to reset the pmu. zap the pram, change out the hard drive with another one with OS 10.3.9, boot from an external hard drive with OS 10.3.9, and external cd drive with an OSX Panther install disk.
    I get the "You need to restart your computer" message in the background, and what looks like a kernal panic message in the front.
    The kernal is version 7.0.0.
    At the bottom of the page it says "We are hanging here..."
    Has anybody been through this? Am I missing something?
    Any help is greatly appreciated!

    Glen:
    Take a look at these two articles and see if you find anything of help:
    What’s a kernel panic.
    Resolving Kernel Panics
    Post back with further questions or comments.
    Good luck.
    cornelius

  • Indesign CS5.5 hangs on startup

    Hi,
    My Indesign CS5.5 (I'm running Macosx 10.6.7) hangs on startup and gets this crash log: http://pastebin.com/xDXmdrt4
    I've tried removing the recovery folder, the settings prefs and the FontExplorer plugin... nothing helps.
    Anyone?
    /Erlandsen

    Mikkel, if the problem goes away with a new account, it is almost certainly a problem with your ~/Library folder, and reinstalling InDesign does not touch that, so it is no surprise the reinstall did not help.
    If you truly removed all the folders I specified, then I'm quite surprised it didn't fix it. Sometimes it is a permissions problem -- you
    might check the permissions on those folders with Get Info in the Finder, and maaaaaaaybe try running Disk Utility's Repair Permissions (usually a waste of time).
    If not, well, try moving *everything* out of  your Library/ folder, and then putting it back bit-by-bit (well, half-by-half). This may be a somewhat unpleasant and potentially destructive process.

  • 10.5 Server hangs on startup

    Hi there,
    After some maintenace I had to restart my MDD Sever but it hanged on startup. Booted again in safe mode (over 45 mins) still no luck. I can get it to boot from a sharepoint running 10.5 client. What's the best thing I can do from there? Sorry, I can't think straight anymore.

    Just installed 10.5.6. No problems, following the usual apple guide to good
    housekeeping:
    1) close all programs
    2) REPAIR disk permissions (irrespective of whether you ran it the day before).
    3) Download and install software
    3a) On MBP, or Macbooks, ensure your AC adaptor is connected (irrespective of whether battery is 100% or not).
    4) Enter password (if asked) and install.
    My Mac Pro took about 5 minutes downloading the 190mB (probably Apple is busy right now) and about 1 1/2 minutes to install.

  • IMac G5 hangs on startup, won't boot from disc

    Hello,
    My brother's computer has been acting up and I've been unable to fix it for him...so I was hoping I might be able to get some advice here.
    Problem: hangs on startup. It goes to the gray screen with the Apple logo and the spinning progress wheel like it normally would, but never gets past that. You can hear the hard drive working and eventually the fan comes on.
    What I've done:
    1) attempted to boot from OSX disc, same result
    2) attempted to boot from Apple hardware test disc. this brings up an open firmware terminal style prompt but does not boot from the disc. using the prompts i reset pram and did the "reset all" command which restarted the computer but it continued to hang
    3) opened it up and pulled the only ram chip out and put it in the other slot. Unfortunately we don't have another chip to test out, but if you guys think it is a likely culprit I'll go buy him one to see if that fixes it.
    Any advice will be appreciated. Thanks!
    -Alan

    Do you hear the drive spinning up? Have you tried a safe bootAfter the startup tone, hold down the <shift> key until you (hopefully) reach the desktop, it will be longer than normal, because Disk Utility's "repair" is invisibly run; it also will bypass any login items. If the system gets to the desktop OK this time but stalls when the shift key is NOT held down, the problem may be some login item that will need to be removed, using the Accounts panel of System Preferences and its Login Items section.
    You could try to repair the machine using Target Disk Mode to access it.

Maybe you are looking for