ITunes 11.1.0.126 (Win7/64) will not recognize iPhone 5 (neither iOS 6 nor iOS 7)

iTunes 11.1.0.126 (Win7/64) will not recognize iPhone 5 (neither iOS 6 nor iOS 7).
Windows can see the USB-connected iPhone.

With iTunes 10 and iOS 6 it was OK

Similar Messages

  • My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

    My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

    I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

    i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

  • Windows 7 and itunes 10.4 will not recognize iphone 4

    windows 7 and itunes 10.4 will not recognize iphone 4.  iphone does not show up in device list in iTunes

    Found my answer by sifting through all itunes questions.  (I tried earlier, but apparently chose the wrong key words.  In my successful search I just searched through everything itunes related.) There was a posting where someone indicated they could not open alternative libraries using the option key method, precisely my situation.  They stated that they solved the problem by appending a ".itl" at the end of the library file.  I tried this myself and sure enough, it worked.  Hopefully it will also work for all others who are suffering from this scenario.

  • Itunes 10.5 will not recognize iphone

    Just updated to 10.5 itunes - now it will not recognize my iphone 4.3.5.  Suggestions?

    I am having this problem, but on my Macbook Pro running OS X 10.8.2 and iTunes 10.7.  Both my iPhone 5 and my wifes iPhone 5 are not recognized in iTunes.  Both our old iPhone 4S's come up just fine.  Any other work arounds?
    I have reinstalled iTunes, restarted both phones, and Mac.  Still not recognizable.
    EDIT: 
    Just tried the other cable from my iPhone 5 box, and it works fine.  I then tried plugging the faulty cable straight into the wall, and it gets no charge.  Faulty cable.

  • ITunes 11.1.4 will not recognize iPhone, iPad after Dell BIOS update

    I suspect the problems everyone is having are related to the BIOS.  I am running a Dell XPS i7-3770 CPU @ 3.40 GHz 3.4 GHz with 24 GB RAM, 64 bit OS x64 based processor.  OS is Windows 8.1
    I just updated my BIOS as suggested by Dell.  Now iTunes 11.1.4 will not recognize my iPhone or iPad.
    My computer accesses the iPhone or iPad, but iTunes does not recognize them.
    This was not a problem prior to updating BIOS.
    Is there a fix or patch?
    I have to sync my devices for work.
    Please no baby-steps replies.  Have tried everything including removing devices from device manager and reconnecting to force driver update and try to force iTunes recognition.  None of that works.
    Thanks!

    Here is the fix from Waldo-E3 elsewhere in this forum.
    Like I said, no baby steps answers please!
    Kudos to Waldo-E3!
      RESOLVED...
    Found these steps posted elsewhere by another and the solution worked for me...
    1. Go to Windows 8.1 Control Panel. 
    2. Go to Hardware and Sound; Devices and Printers; Unspecified (look for Apple Mobile Device USB Driver) 
    3. Right-click, then select properties on the menu list. 
    4. Select the "Hardware" tab at the top  When the properties dialog box opens, once more select properties on the lower right hand button. 
    5. Under the "Driver" tab menu, the update driver button will be grey and unselectable here. So you need to select and click "Change Settings" button located near the lower left corner. 
    6. Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button. 
    7. Select "Update Driver". 
    8. Select and click "Browse my computer for driver software". 
    9. For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.   
    10. Click Next, and let the driver re-install. 
    11. iTunes  11.1.4.62 should open automatically if your iphone is connected already

  • HT1688 itunes will not recognize iphone

    got message to unistall and reinstall 64-bit itunes. I have done this several times and Itunes will not recognize my iphone. I have tried this several times over the past few weeks and same results. highly annoyed and ready to unistall permanantly. Computer is windows.

    See:
    iPhone not recognized in iTunes for Mac
    iPhone not recognized in iTunes for Windows

  • I have tried everything but mac book will not recognize iphone

    i have tried everythiong but mymacbook will not recognize my iphone4s

    Read here.
    http://www.apple.com/support/iphone/assistant/itunes/

  • PC will not recognize iphone

    My PC with windows XP will not recognize my iphone. I was able to get it to backup up the phone by installing the latest iOS. Not sure how I managed that. For a while the pc thought thte iphone was a camera. The iphone does not show up in my computer. Does anybody know how to fix this?

    Update itunes

  • Just started. iphoto will not recognize iphone as a camera

    frustrated here. All of a sudden, IPhoto will not recognize my iPhone as a camera and therefore will not upload photos taken on the phone. No settings have been changed. Not sure what to do here.

    Got any photos in your camera roll that were emailed to you or saved through safari? If so, try deleting them or emailing them to yourself & then deleting them from your camera roll. See if iphoto will then see your phone.

  • Itunes on new computer will not recognize iphone 4

    I have a iphone 4 and a new macbook pro.  Just downloaded and updated to latest software on both phone and itunes and the device will not be recognized by the computer or itunes

    iOS: Device not recognized in iTunes for Mac OS X

  • Windows 8 will not recognize iPhone 5 USB

    I just bought a new computer and went to setup itunes, My ipad synced well but iphone 5 will not get recognized in windows 8, can anyone who has overcame this help please Thank you all

    Check especially the Apple Mobile Device Service sections here:
    iOS: Device not recognized in iTunes for Windows

  • Computer will not recognize iPhone, not even to charge

    My computer has stopped recognizing my iPhone as being connected, and will not bring it up in iTunes or charge it. I've tried three different iPhone cables and three different USB ports, and none of them will connect. I know that the USB ports are working correctly, and the iphone will connect to AC power with the three cables. Basically, I know that every component is working separately, but when I put them together they will not work! The Apple device driver is not located in Device Manager, not even as a USB storage device. I expect the driver to install when I connect my phone, but instead my computer just ignores it! I ran diagnostics on iTunes, and this is what came up:
    Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
    Hewlett-Packard HP Pavilion tx2500 Notebook PC
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    iTunes Serial Number 631DC1C4FDB2366B
    Current user is not an administrator.
    The current local date and time is 2010-04-20 09:51:51.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 3200 Graphics
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: a8ab6a891b0f1e4cf924b4c02b23599e
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod classic running firmware version 1.1.2
    Serial Number: 8K733VWXYMV
    iPhone 3GS running firmware version 3.1.3
    Serial Number: 87937RWF3NS
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Please help me fix my phone, I need to be able to at least charge it from my laptop and to put new music on it!

    i have used three different charger cables. when i plug it in i get a battery symbol with a bit of red at the tail end. bellow that is a lightning bolt symbol.ive been leaving it plugged in for hours....but no progress.

  • After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

    After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
    Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
    When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
    I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
    It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
    I tried to clear the cache in both programs but it didn't help.
    Has anyone an idea????

    First see if a reboot of your PC helps.  If not,
    Resets may be in order:
    Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop.  If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
    Bridge:  Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
    Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

  • IMac 10.6.8 will not recognize iPhone v.4.12.09 with iOS 7.1.1

    I cannot get photos from my iPhone version 4.12.09 with iOS 7.1.1 to appear on the desktop of my iMac running 10.6.8.
    It will not open iPhoto nor will preview recognize the iPhone as being connected. No way to get newly taken photos to iPhoto.

    Have you just tried opening iPhoto manually to see if your iPhone will show up that way?
    Have you tried shutting down your Mac and doing a PRAM reset?
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone.

Maybe you are looking for

  • My mic is not working but it works fine every were...

    My mic for skype all the sudden starts being very queit i am talking to my friend and he is saying he can not hear me I used the skype call thing to see for my self and somtimes i can hear my self but very very very queit i use windows 8.1 and deskto

  • Sound advice from BT's business partner Lithium

    I was curious about who and what is behind our new forums, so popped over to the Lithium site and wandered around a bit. BT seem to have chosen a partner who has a good pedigree in online communities. A Lithium Guru, one PaulGi, has some great advice

  • Exporting from Aperture 3.0.2

    I am able to Export a project to an new library from my iMac but when I try exactly the same operation from my MacBook I get a message ' Export cancelled - The library has not been exported to "(null)" because the operation was cancelled.' Any ideas?

  • Help required with Live 24

    Hi, I had an older SB Li've 5. DE Card before i bought the Li've 24 Bit . I used to play all AC3 Files in my play center as in the mixer i had the option of decode ac3 files. But in the new i did not find this option and in the media source player it

  • Am i supposed to invoke application.cfc?

    My website is always on the index.cfm page, do I just throw a <cfinvoke> tag in there to call the application.cfc?  Am I supposed to name it with an uppercase A (Application.cfc)?