Itunes 11.1.2 not able to see my iPhone or iPad 4
I just plug my Iphone and my Ipad 4 generation and the dont show on itune 11.1.2
Thank
Hello Roland,
I would be concerned as well if my iPhone or iPad were not recognized by iTunes. I recommend the following articles for an issue liek this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
Thank you for using the Apple Support Communities.
Best,
Sheila M.
Really? These problems, in my experience, are caused by the 11.1.2 update, and no boilerplate help document is going to fix a broken software update.
Similar Messages
-
I have Windows 8 and Itunes 64 bit. Not able to synch any iphones or ipads with this version.
I have Windows 8 and Itunes 64 bit. Not able to synch any iphones or ipads with this version.
A Google search should provide a number of instructional links.
-
I have downloaded a French cd on iTunes. It is both speaking and music. It has downloaded fine in iTunes but it will not transfer to either my iPhone or iPad. Could someone advise please?
Or 80 years in router years.
Check the site of the manufacturer and see if there is an update for your router and install it. If there isn't one try restarting your router by pulling the plug on it and plugging it back in. -
Why am I not able to see my iPhone movies in my photo stream?
I noticed that all of my pics are being uploaded to my computer via icloud, but none of my movies are. What should I be doing differently?
For Find My Phone to work, the iPhone has to have Find My Phone turned on in Settings > iCloud.
The Mac has to have be signed in to the same iCloud account as the iPhone, click on Find My Phone, and the iPhone should show up IF the iPhone is turned on and connected to the internet. All of those conditions have to be met.
If you are meeting all of those, exactly how are you trying to locate the iPhone on the Mac? -
I had my iTunes musical library on an ext. drv. WD 2TB, ‘MY BOOK ESSENTIAL'. Three weeks ago, my computer was infected by a virus that fried it. It did not affect the external drive. I bought a new computer: a laptop, Dell XPS, Intel Core i7-2630QM CPU, Windows 7 Home Premium. I have been able to connect the WD external drive; however, I am not able to see the musical library in my iTunes or Explorer. ‘My Computer’ shows the external drive as ‘G:’ 95% full. It reads, 32.1 GB free of 1.36 TB. When I click on the drive to see its contents, it shows nothing. The library in iTunes also shows nothing. Can anyone help, please? How can I reconnect my old musical library to my new laptop and iTunes? Many thanks.
Hmm, viruses don't generally "fry" drives. They can make bootable operating systems not bootable, hide data, and corrupt executable files. Software can potentially wipe all the data from the drive but it shouldn't be able to physically damage the drive. Bah! What's done is done.
As to unhiding your files assuming they are just hidden....
Hit Start > Run, type in CMD and press enter. Type the following at the prompt and then press enter:
attrib -h -s -r g:\*.* /d /s
This tells windows to clear the hidden, read-only, and system flags from all files on the drive, assuming of course your profile has the power to "see" the files and change them.
If that doesn't work then you may need to take ownership of the drive first. The drive may have security settings that make it "belong" to an account on your old system. Right-click on the drive in Windows Explorer and click Properties. Click the Security tab, the Advanced button, the Owner tab, then the Edit tab. Make yourself the owner, then you can make any other changes to the security settings you want to back on the Permissions tab. (If you can't change the owner log out and log back in as Administrator). For iTunes your account (or everyone) and SYSTEM need full access to all files. Any changes you make should be applied to "This folder, subfolders and files", should be inheritable and you should also replace the permissions on all child objects.
tt2 -
Apple TV and iTunes not able to see each other
I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck. -
I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text -
Hi is it possible to see the photos on laptop from iphone without installing itune software. I am connection my iphone with laptop but not able to see the phots pls guide me how to do that?
You can import pics taken with the iphone to your computer withour itunes. Itunes has nothing to do with importing pics taken with the iphone.
-
I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.
Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M. -
I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
Please help.Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? -
Cisco 877w - Apple devices not able to see wired apple TV
Hello All,
Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
Has anyone got anything more complrehensive I can read?
Thanks
DavidHello David,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
Case Description:
Cisco 877w - Apple devices not able to see wired apple TV
Case Solution:
The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
Next perform the same config your BVI interface:
Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
Other commands that I used to troubleshoot with were:
debug ip mpacket - Multicast Packet Debugging
debug ip mroute - Debug Multicast Routing
sh ip mroute - Show IP Multicast Routes
By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward. -
hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!
does anybody know how to solve this problem? thx!If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0
-
hi, i installed the latest version of itune on my pc, but still i am not able to connect my iPhone with my pc....
The top window says Accessing iTunes Store and the animation underneath will
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I am not able to sync my iphone 4s to my itunes because my mac software is not up to date. What do I need to do?
Is this a brand new phone? If it is, which iTunes version does it say it requires (see side of box)?
With a Mac running 10.5.8 you can install the last version of iTunes 10.6
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575
An older iPhone 4S should work with the above but if it is a brand new one I don't know. If the box says it requires iTunes 10.7 then you will have to upgrade to OSX 10.6.8 at least in order to run iTunes 10.7. You provide no information about your computer hardware so I can't tell you if this is even possible.
1) Make sure your computer meets Snow Leopard technical specifications - http://support.apple.com/kb/SP575 This mostly means making sure it is an Intel Mac and has at least 1GB RAM (more is recommended). To check RAM, go to the Apple in the upper left corner of any window, then "About This Mac". Now continue to "More Info...". It should say you have at least 1GB of "memory".
2) Apple no longer carries 10.6 in its stores or online. Telephone Apple to purchase a Snow Leopard disc. In the USA: (800) 676-2775 (contact information for other countries: http://support.apple.com/kb/HE57)
Alternatively you can buy from online retailers but anticipate paying much more than the original price which is the price still charged by Apple
3) Backing up your computer before upgrading is always a good idea.
4) After installing from the DVD, update your Snow Leopard installation using Software Update or manually downloading and installing the Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399 -
My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?
Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.
Maybe you are looking for
-
T450s downgrade Win 8.1 Pro to Win 7 Pro Secure Boot Process?
Hi all, New owner of a T450S with 8.1 Pro. I have a Windows 7 Pro OEM disc (no serial number) that I can put on a USB thumb drive. Prior to owning a secure boot machine I would just format the hard and install Win 7. With secure boot and the downgrad
-
Is there a way to stream netflix from I phone to my TV?
Is there a way I can Stream Netflix from my I phone to my TV?
-
How to convert abap output/excel output to pie charts
Hi....... I've managed to output my Hierarchial sequential report output into a excel file....converting the abap output to xml and then mailing it.....now how can i convert this to pie chart......and mail it.....is it possible to have a pie chart in
-
Problems with symbol characters in WIKI using plaintext authentication
Hi! I have a Lion Server with Wiki service enabled, and using plaintext to authenticate against third provider LDAP server (Oracle/SUN ldap server). The authentication fails if the password has a at least & character inside (I do not test another sym
-
Which is better for programming?
I am interested in the MacBook Air and pro; which would be better for programming purposes?