ITunes 11.1.3.8 on Windows 8.1 64 bit display problems with CD tracks and Internet Radio

Recently installed iTunes 11.1.3.8 on a Windows 8.1 64 bit machine and I have the following problems:
1) Inserting a CD in order to listen or import tracks I get no display of tracks when I click the CD drive in the side bar. The list has only white and gray lines where the tracks should have been listed and the top of the table contains some grabbed display from Music table (i.e. the first track that was displayed in Music but only 2/3 of the line. The status bar at the bottom of the iTunes window shows correct information about the number of tracks and total playing time.
2) Hitting the play button while on this CD Drive listing starts the playback but the tracks play in random sequence even though shuffle play is not selected (not blue to be precise). In the zone with track name, playback progress, elapsed and remaining time and other track options the indications are correct.
3) Importing the CD works but the tracks are imported in random order. Track information from CDDB providers is accurate eventhough nothing is displayed while selecting CD drive as per problem 1). Imported tracks in Music show in random order. This is also strange because when I was importing something from a CDDB indexed CD or even a non indexed one the tracks were always imported in the order they were written on disc.
4) Going to Music -> Internet I get the same white and gray lines with no stations displayed but this time the status bar reads Zero Stations. Obviously I can't select/listen anything
I'd say I'm quite experienced with iTunes, using it since 2005 but never had problems of this type. Some assistance would be helpful. I smell a bug that maybe shows up in my particular configuration. Searched everywhere, maybe not good enough, but couldn't find something even similar.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

Similar Messages

  • HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

  • Itunes 10 Hangs When Started On Windows 7 Ultimate 64 bit - Sp1 Beta 178

    Hi
    Itunes 10 hangs when started on Windows 7 Ultimate 64 bit - Sp1 Beta 178
    I have tried following things :
    -Scanned for Virus + SpyWare
    -Scanned for Corrupted System Files
    -Scanned for Errors in registry
    -Cleaned up items that startup with windows
    -Installed latest Ati Catalyst 10.8 Drivers
    -Checked settings in Itunes Version 10
    My Mobile Model :
    Apple Iphone 3gs 16 Gb
    My Hardware and software :
    HP Pavilion m9660sc PC
    Intel Core I7 980X 3.33 Ghz
    DDR3 PC2-8500 6 Gb Memory
    HDD WDC WD10EADS-65L5B1
    DVD-RW TSSTcorp TS-H653Z
    LG L225WT Size 22 Screen
    AMD Radeon HD 4850 1 Ghz Memory
    Mainboard Pegatron Intel X58 Express
    Windows 7 Ultimate 64 bit
    Windows 7 Service Pack 1 Beta 178
    Adobe Reader 9.3.4 - Norwegian
    Spotify Version 0.4.7
    Microsoft Security Essentials 2.0 Beta
    Personal Ancestral File 5
    Java(TM) 6 Update Version 21
    Google Sketchup Pro 7.1
    Google Chrome Version 6.0.472.53
    Tales Of Monkey Island Version 2.0.0.0
    Kai Anders Wold - [email protected]

    Here is the latest update :
    Removing Microsoft Security Essentials 2.0 Beta fixed the itunes 10 hangs.
    Kai Anders Wold - [email protected]

  • I tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package anyone got any ideas how to fix this?

    i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
    i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?

    There are numerous threads discussing errors with 10.5.0
    can't install itunes 10.5
    ***Fix for iTunes 10.5 Install on Win7 64bit***

  • I can't download the new version of iTunes.  Halfway through the installation a pop up window appears saying "There is a problem with this Windows installer package. A program run as a part of the set up did not finish as expected. Contact your support pe

    I can't download the new version of iTunes.  Halfway through the installation a pop up window appears saying, "There is a problem with this Windows installer package. A program run as a part of a set up did not finish as expected. Contact your support personnel or package vendor.

    Got exact same problem, was told to delete all old apple, quick time and bonjoir from computer then it would work. I use a programme called malware bytes and this takes everthing out of your computer right down to the roots but unfortunately I still have same problem

  • I just want to reinstall windows 7. will i face any problem while syncing with new itunes, i just want to reinstall windows 7. will i face any problem while syncing with new itunes???

    i just want to reinstall windows 7. will i face any problem while syncing with new itunes, i just want to reinstall windows 7. will i face any problem while syncing with new itunes???

    Syncing to a new iTunes library or computer will erase your iPhone. Only if you back up your phone manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPhone without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved: http://support.apple.com/kb/HT4946
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    You can also back up iTunes and restore it on your new computer How to back up your media in iTunes ,but the iPhone will be erased anyway during the first sync.

  • When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

    when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

    Hi
    I've got a similar problem.  iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error.  I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified" 
    Any ideas?
    Rick

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • My iphone 4 was crushed on the road.  Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact mean

    My iphone 4 was crushed on the road.  Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store.  What does that mean please?

    Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.

  • In iTunes, is there any way to play one song at at time and have the song stop at its end.  I want to play guitar with a track and have that track stop playing rather than going to the next song.

    I want to play a single song in iTunes on my ipad and have the track stop when the song finishes, rather than itunes playing the next track.  I play guitar with the track and need iTunes to stop at the end of the song.
    I have worked around this issue by creating a separate play list for each song, then inserting the song into the play list.  I would like to find a more straight forward solution that would eliminate this extra step.  On my PC, I use QuickTime to bring up an individual song and then can play one track at a time.
    Thanks!

    On the IPod if the shuffle icon is colored blue it is ON, if it is colored white it is OFF. This control is global, if it is ON any album or list will be shuffled.

  • My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync.

    My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync. The same error message appears saying my computer needs to update software, but my mac has the latest software available (albeit rather old). Can I undo the software update on ipad??? Thanks

    Thanks for your response, Niel. Is there no way of removing the last update from my ipad????
    Appreciate your help
    James

  • WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

    My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft.  Now I cannot print at all.  I get an error that says,  "windows cannot print due to a problem with the current printer set up".  I have tried reinstalling and a ton of other solutions to no avail.  Can someone PLEASE Help!

    Hello there, @jesseangelique ,
    Welcome to the Community!
    I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
    Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Also, let me know which Officejet 8500 Model you have:
     HP Officejet Pro 8500 All-in-One Printer - A909a
     HP Officejet Pro 8500 All-in-One Printer - A909b
     HP Officejet Pro 8500 Premier All-in-One Printer - A909n
     HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problems with captivate 8 and windows 8

    I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

    Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

  • The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what ca

    The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what can I do?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

    I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

    Please also see Boot Camp: Set the default operating system.

Maybe you are looking for

  • Need suggestion in forms migration and database migration

    Friends, We have currently forms 6 (not 6i) applications in Novell 4. and our db is 9iR2 in RHEL AS 3. which is running for more than 8 years. our management has decided to go for the migration.... Before one month i searched in the web and i came up

  • How to find out Secondary STP Root bridge in cisco switche network

    Hi, i need to find out Root Primary and Root Secondary bridge in all my offices. sh spanning-tree summary command can tell me which switch is root bridge primary, but how can i find secondary root easily with some simple command? sh spanning-tree sum

  • Is there a way to block email in Mail

    I am hoping to find a way to block email in Apples "Mail" I know about rules, and I am using them, but in this case I need to effectively BLOCK senders. Where I live, I am restricted to satellite service provider which unfortunately is restricted by

  • RSS Feed not working in chrome browser for anonymous users but working fine in IE

    HI All, We are having public facing site for anonymous users. We have created links for OOTB RSS feed for lists and libraries. The link is working fine in IE, but for chrome it is asking for credentials. We are using publishing site. Any idea or poin

  • Flash player not recognised?

    I'm on a website that contains videos that require Flash player to run. I'm getting the message "Flash 7 or above is required to view this content" in the space where the video should be. I have installed Flash Player 9 two or three times but it keep