ITunes 11.1.3-syncing issues
I've been having this problem for a few days now. I've been unable to sync some of my music on my ipod touch, which is a 5th generation. It's starts and stays on the "waiting for changes to be applied" bit for about a minute, then when it gets to around the 8th song (sometimes it's over 200 songs that need to be synced, but recently, it says only 29), then it cancels by itself. I've tried everything I can think of and everything the websites say. I've reset the ipod to factory settings, I've restarted my computer (it's a PC), I've updated my itunes, I've unticked and reticked my music, I've selected "manage music manually", I've changed USB ports, basically everything that's available. And judging by the threads I've seen on this website, I'm not the only one having this problem. It's never had this problem before, and I really want this to be sorted.
Additional info: most of the music that refuses to sync has come from CDs that I've burned onto iTunes. I've also been charging my iPod in a special USB plug, since my computer had been completely wiped clean a while ago, so I lost everything and had to put togather a spreadsheet of all the songs I had and still had. It's fine now, but I'm not sure if reintroducing the ipod to my computer caused this problem. It's never had that problem before. I've charged it away from my computer loads of times and it turned out fine.
maybe:
Itunes keeps cancelling sync ???: Apple Support Communities
Similar Messages
-
IOS 6 and iTunes 10.7 WiFi Sync issues
WiFi sync works for a day or two then from the device is just keeps saying Looking for Mario Michela's iMac... I restart iMac, reboot iPhone and or iPad. connect via usb cable, uncheck WiFi Sync (apply), recheck WiFi Sync. It will work again for 2 or 3 days. Then starts to fail again.
I've tried using Eithernet and wifi on the mac (no difference)
I've tried turning off the firewall (no difference)
I've reset all setting on the iPhone (no difference)
I've reset SyncServices Folder (/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsy nc.pl full) -(No difference)
I've called Apple Care 3 times, I keep getting passed around because sync is between product departments.
iOS doesn't support desktop applications, iMac doesn't support mobile devices..
I'm hoping iTunes 11 fixes this issue.. This issue didn't occur prior to iTunes 10.7.I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris -
Itunes 7.5 speed sync issues (WAY TOO SLOW)
Ok. I googled this and found that I'm one of a few thousand people suffering from the same problem.
Short Story:
- My ipod died and is being sent to factory for replacement.
- Borrowed girlfriends ipod since she doesn't use it much.
- Wiped iPod and started to sync my library to it.
- Took about 4 hours to copy a few songs... wth?
So, I looked this up online and sure enough there is a major complaint from lots of people stating that Itunes 7.5 has major issues, especially with sync-lag. I can't wait the required 7 days to sync my 15K songs and hundred or so audiobooks... so?
I can't use the "revert to Itunes 6.0.5" trick because my library is HUGE and I've made massive edits to the library since the upgrade to 7.5.
Itunes was running GREAT prior to last week. I've been using it on Vista for most of two years now with absolutely no problem... until now.
Is there any update on when Apple is going to correct this bug? Are there other threads about this? (Official threads on here I mean.. they are all over other forums on the web) (I searched but came up empty after a brief attempt).I have a similar problem. I get a message saying Itunes was not properly installed and that I will not be able to copy or burn. Also not able to Sync Ipod touch. Told to uninstall and reinstall. Do this as suggested via the help site but same problem.
Any ideas anyone -
This is my first posting so sorry for the messy title... I didn't realise how it all worked here.
I have a shiny new imac, shiny new ipad and have all my media on a network hard drive - itunes works fine on the mac - no problems - photos visible in finder and photoshop - no problems, but when I come to sync the new ipad - several things may happen (I have tried many times now)
1) a long wait - whirly gig round spinner thing - then music visible on the ipad but greyed out and useless
2) no photos at all synced
3) no videos synced
4) info syncs ok
5) apps seem to have synced OK
It is not a data size issue as the same amount of data synced before the new kit from my old windows pc on to an iPod - I daren't try syncing the ipod as I need it for my next business trip.
I tried removing the ipod cache files for the photos - no difference - I tried restoring the ipad - no difference
Have I completely wasted a large amount of money?ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"
-
ITunes and iPhone 4 sync issues with Windows 7 64 bit
I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
4. The iPhone "iPhone" can not be synced. The required file can not be found.
5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
6. The iPhone "iPhone" can not be synced. An internal device error occured.
These errors keep appearing one after the other.
I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
I have tried changing time zones.
I have created a new user account on same laptop and still have same issues with iTunes.
Restore fails with error "Unable to read file or file is corrupt".
Yet iTunes works fine on a 32bit operating system of Windows 7.
The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
I have been trying for over a week with every piece of trouble shooting I can find to make this work.
Any help or further information would be VERY GREATLY APPRECIATED.
Thanks in AdvanceI too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
I've gotten a ton of errors, here's a sample.
iBooks couldn't be installed on my iPhone unknown error 0xE800000C
Textie couldn't be installed on my iPhone, unknown error 0xE8000013
"failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
unknown error 0xE8004006
"duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
I tried everything discussed in the following thread but it did not work.
http://discussions.apple.com/thread.jspa?threadID=2401822
Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
Just grasping at straws here.... -
Belatedly upgraded to iTunes 11; iCloud and syncing issues with iPod
There are now a bunch of tracks in my library listed as iCloud tracks; confusingly, some are duplicates of other tracks, and some are not. Also, with no other change than the iTunes upgrade, it's telling me that I'm way over the limit and can't sync my library to my iPod. I'm sure this is simple but I can't figure it out. Thanks in advance for any help you can offer.
diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs. -
ITunes, iPhoto & Aperture - odd sync issue
Hi all,
I am a user of both iPhoto & Aperture, with unified photo library, and occasionally sync one or more events to my iPhone (rather than syncing all photos automatically).
I've noticed recently a rather odd issue, where iTunes does not seem to be "seeing" my iPhoto library. If I set Aperture to the source, then all my events/projects show up correctly. If I choose iPhoto as the source, 0 photos .
Opening the library directly in either iPhoto or Aperture works just fine - all events and photos present and correct - so the issue appears to be around the link from iPhoto to iTunes - weirdly, given the unified library, Aperture to iTunes seems to be fine.
Whilst I _could_ just sync to Aperture, a) the error bugs me , and I'd like to sort it out, and b) iPhoto is a better manager of events (chronological order etc) so I would prefer to use iPhoto to sync to iPhone, iPad etc.
I'm running Mountain Lion and both Photo apps are up to date. Hopefully some kind soul can assist!?Hey Aljrob_UK
Thanks for the question. It sounds like there may be a permissions issue with your iPhoto library, let's see if repairing this will help to resolve the issue. See the additional information section of the following article:
Important: Please backup your library first (http://support.apple.com/kb/PH2504)
iPhoto 6 and later: Rebuilding the iPhoto library
http://support.apple.com/kb/HT2638
Additional Information
iPhoto 9.3 and later introduces a new Library First Aid dialog in place of the previous rebuild options.
If Repair Permissions does not resolve your issue, attempt Repair Database and/after Rebuild Database. You can skip the Rebuild Thumbnails.
Thanks,
Matt M. -
IPod Touch 4G and iTunes 10.2.2 sync issues on mac?
Hey,
I recently purchased an iPod Touch 4G 32GB as a replacement for my iPod Touch 2G 8GB, I plugged it into iTunes on the first boot up of the iPod, like normal, and expected to be presented with the usual set of prompts about how I would like to set up my iPod. However, the iPod appeared in the sidebar, but nothing happened to the main portion of the program, and upon unplugging the iPod, iTunes simply crashed, and I was presented with an error message. I put the iPod into DFU mode, and tried a manual restore, then had to restore from a separate firmware file I downloaded for 4.3.2.
I assume from the failure of all of these methods, there must be some sort of problem with iTunes 10.2.2 for Mac and iOS 4.3.2 for iPod Touch 4G. In the end, i managed to get the iPod operational on my PC in an older version of iTunes, however, it still does not sync properly, and if I try to sync movies to the iPod, iTunes crashs like it did before. Is there a known fix for this problem? Or have I got a faulty device? Also, the sync messages are all distorted.
Thanks!Marissaur, try:
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart -
ITunes upgrade and iPod syncing issues
I opened itunes and it said there was an upgrade for it. I installed it and when I plug in my ipod, it syncs, then when I try to sync it again, it does not. on the initial opening of itunes I noticed that windows has the ipod drive listed as "G". upon syncing it disappears. I unplugged the ipod and then plugged it back in. windows again recognizes the ipod and the ipod automatically syncs when connected so it can find it in itunes. as soon as its done syncing, again it disappears from windows. there has to be a fix for this. as far as I can tell its in the itunes software that is causing this because I have not changed any drivers. any help would be greatly appreciated.
If you don't want to do manual update, theres nothing else we can really recommend. You might want to invest in a cheap External drive and put all your music on it. You can get one for 100 or less if you shop around
-
After I have watched and deleted a video, if I do so on my iPhone or iPod touch when I sync then the blue circle disappears showing the video has been watched.
However, on my new iPad 4, when I have watched and deleted a video, when I sync with iTunes the blue circle doesn't disappear and the video is still showing as un-watched.
Any ideas ?
I am running Windows 7 and the latest version of iTunes and iOS on the iPad.No
-
Itunes and Iphone 3gs syncing issues
I have tried to sync my Iphone 3gs (3.1.3) and Itunes (9.1.1.11) a couple of times. It has been about 2 1/2 hours into each sync and it appears to get stuck, or atleast very slow, not even a 1/3 of the way. Any help is appreciated.
Thanks,
JustinYou could do that, or just completely reset your phone and re-sync everything. You may have a corrupted file somewhere that is causing the back-up to take so long. When I had the problem, it went away when I deleted the news reader apps. I think the apps where causing the problem because I could read the news articles offline, so they were being cached and all that content was being backed up every time as well. If you have any app like that where you can use it without a cell signal, it could be that.
-
Itunes - AIR Iphone application - Sync issue
I created a test AIR application using iphone packager. I followed all the steps descriped in the developer guide
to build the application.
When I sync the application with my iPhone it shows the error :
The application "xxxxx" was not installed on the iphone "xxxx" because the entitlements are not
valid.
I tried deleting all the certificates/provision files and created new ones. Still, I get the
same error.
Any help is highly appreciated.
Thanks,
Arun.Looks like the issue is in specifying the app-id. I removed the bundle id from the app id in the configuration
file. It installed without any issue -
HT201210 Anyone having Windows 8.1 and ITunes, IOS 7.1 sync issues
I'm having multiple issues with all my devices that have been updated to Windows 8.1 (PC) and the latest updates for ITunes, especially on the devices that have already been updated to IOS 7.1. I'm only referencing my IPhone 5S because it was the first device I had trouble with. I am having issues with all my other devices too but this is the latest hardware and software from both Apple and Windows. Please advise. Would like to know if it's just user-error or a systemic issue.
Thanks in AdvanceFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Itunes/Outlook Calendar Syncing Issue - UTF-8 Flavor
I have had the usual and much discussed issue of outlook calendar does not sync with iTunes. The recommendations have been to remove iTunes and re-install, even blow away all the configuration files as well, and it even worked for me once. But not this time.
I was running Windows XP, and all of a sudden the Outlook 2007 calendar just stopped syncing. I upgraded from XP to 8.1, and that was not fun, but inevitable, and still didn’t correct the problem. Now, if you never upgraded from XP to 8.1 – you can’t – at least it is not a direct flight. First, you have to upgrade from XP to 8.0, then from 8.0 to 8.1, and there is no upgrade in place from XP to 8.0. So what does an upgrade in place mean? Your applications and profiles are not carried over. Just your data (if you ask nicely) is carried over – but all applications have to be re-installed from scratch, and reactivated if there was license activation.
So, forget about re-install of iTunes, I changed OS, reinstalled iTunes and Office 2007 from scratch. And still had the syncing problem. So, I wasn’t getting off easy.
In searching, I found some debugging stuff which I tried, as follows to turn on logging:
So, I ran the following:
cd C:\Program Files\Common Files\Apple\Apple Application Support\
defaults write com.apple.Outlook.client.exe ShouldLog YES
defaults write -globalDomain SyncServicesLogEverything YES
defaults write -globalDomain SyncServicesLogPersonalInfo YES
And this turned on a lot of tracing. The tracing helped me understand what was going on under the covers, But I am not sure I was getting enough of the information that I needed to really zero in on the bad record.
Now, I will pause and provide some observation of my specific Sync.
An iTunes Sync on a Windows machine when using Microsoft Office and Internet Explorer is selected on the INFO tab of the page for the device.
Selections include Contacts, Calendars, Bookmarks and Notes.
One of the programs involved with Outlook Synchronization is: com.apple.Outlook.client.exe
The program is called when Outlook data needs to be accessed, and is used for contacts, calendar and notes when those items are paired between the iDevice and Outlook. Bookmarks are usually paired with the browser, for example IE.
During the sync operation, each of these are sync’d separately, that is why if you follow the sync actions, iTunes will reflecting what is being synced at the moment, for example “syncing contacts”.
When syncing the calendar, and iTunes is running a slow sync, it reads the Outlook calendar using the com.apple.Outlook.client.exe and does processing of the recursion and time zone information.
For example, for recurrence:
[5484 @ Tue Jul 01 10:30:59 2014] [YSLog com.apple.Outlook.client.exe] Setting recurrence data <04300430 0d200200 000000ae 06000c00 00000000 00000400 00002120 0000e703 00000000 00000000 00000000 0000a0e7 980cc016 d10c0630 00000830 00000000 0000a005 00000000 00000000 00000000>
[5484 @ Tue Jul 01 10:30:59 2014] [YSLog com.apple.Outlook.client.exe] 0 recurrence exceptions
[5484 @ Tue Jul 01 10:30:59 2014] [YSLog com.apple.Outlook.client.exe] Reading the Extended Exception Info (i.e. Unicode data)
[5484 @ Tue Jul 01 10:30:59 2014] [YSLog com.apple.Outlook.client.exe] Done making compatible recurrence
For example, for timezone:
[5484 @ Tue Jul 01 10:30:43 2014] [YSLog com.apple.Outlook.client.exe] Could not create a time zone from outlook name, tried using name (GMT-05:00) Eastern Time (US & Canada)
Then the calendar entries are pushed, for example:
ca965dbc4717d9488fafc9266f1f829304082700 = {
"all
day" = 1;
calendar
= (
ca965dbc4717d9488fafc9266f1f829382800000
"com.apple.outlook.freebusy" = Free;
"com.apple.syncservices.RecordEntityName" = "com.apple.calendars.Event";
"end date" = "2020-05-11 12:00:00 +0000";
location = "United States";
"start date" = "2020-05-10 12:00:00 +0000";
summary = "Mother's Day";
So, my SYNC fails, and I crash and burn with:
[5484 @ Tue Jul 01 10:41:22 2014] [_ISDVLog com.apple.Outlook.client.exe] SyncServices assertion failure (nil != strUTF8) in [(null) (null)], SDLogging.m:641 could not obtain UTF-8 flavor of formatted string
[5484 @ Tue Jul 01 10:41:23 2014] [YSLog com.apple.Outlook.client.exe] objcMain caught an exception:
name
NSInternalInconsistencyException
reason : [(null)
(null)]: could not obtain UTF-8 flavor of formatted string
user info : (null)
call stack : (
Now I’m back. So, during the extract and push of the outlook calendar entries, iTunes is building formatted strings. Now, Unicode is usually 16 bit (2 characters) Unicode, sometimes called double byte code. UTF-8 is single byte, so realize you can’t squeeze 16 bits into a 8 bit byte. However, you could if the Unicode string only contained characters that were valid for the UTF-8 character set. My interpretation of the error message above was that somewhere a formatted character string contained a “non-UTF-8” character and raised the assertion. Now, my issue with the excessive detailing from the logs was that – at least with the logging parameters I had turned on – I couldn’t figure out which calendar entry caused the exception to be thrown.
First instinct was that the last calendar entry in the trace was the culprit, so I deleted that calendar entry, ran again, the sync went up to the previous entry, and threw the exception. This gives me two theories: Either the sync was processing the next entry – which wasn’t printed in the trace yet – and failed, or the sync was going back to previous records – like reviewing the buffer. In either case, the trace wasn’t helping and it was all theories.
Now what? What has everyone been saying? Issues with recurrence. And in the trace, as you see above as an example, “0 recurrence exceptions”, “reading the extended exception info (i.e. Unicode data)”.
Now, I have no clue what that means. My initial guess was that recurrence exceptions (I had non-zeros on some) was an error. But further research I realized what it could mean was that these were situations where there were recurrence exceptions. What is a recurrence exception? Suppose I want to schedule a meeting on the 4th day of the month, for every month of the year. Well, except maybe July 4th, because it is a holiday and the office is closed. I would send the meeting invite, and then a cancellation for the July 4th. (I hear there is no simple way to do this). I now have an exception because I broke the recurrence chain. Other forms of exceptions is if I keep changing the location, or the body of the invite – e.g. every month I update the agenda, but only for one recurrence, not the entire series.
So, keep in mind, that if the issue is conversion to a UTF-8 character, and it is failing, then uninstall/reinstall of anything is not going to help if the real issue at hand is the data in Outlook and is not a coding or configuration issue. Now, sometimes it is an issue, but you need to see why the syncserver tasks are failing, and may fail due to other reasons including other data issues.
So, what did I do? Well IO have 15K calendar entries, which, was taking an hour or two to slow sync (I call it a slow dance) and I was,spending days (maybe a couple of weeks) trying to fix this – and frustration was on the high end.
I removed some of my older recurrences, and changed others from never expire to like 25 maximum occurrences. No idea which one worked, or even if it was a coincidence. However, the UTF-8 error went away, and then I moved to the next issue.
Now, before we get there, with outlook 2007 finding recurrences is not difficult. Go into the calendar, and select appointment or list view (Outlook 2013 list view works ok). You can then sort on the recurrence column and see which (if any) items gave a recurrence pattern. Now maybe someone can figure out specific BAD calendar items that are throwing the exception to give us a better idea of what to look for and then report it so we can do further research.
Now, once we can get the issue out of the way, stop iTunes from throwing an exception, we are not 100% done yet. By this time what is in Outlook and on the iDevice is out of sync. We need to get that message to popup asking us if we want to merge the data between the iDevice and Outlook. This can be important if you don’t want to lose data. My issue is that with iTunes 11.2.2 for some reason won’t do it, i.e. when I select “reset sync history” it doesn’t work. At that point I was forced to rename my iTunesprefs, the syncserver folder, and a few other folders. In this case, for Windows 7 and later, the folders in “Apple Computer” of both the local and roaming paths, and I had to cancel running tasks that had those folders open. One way or another, you want the iTunes message asking if you want to merge the folders.
What can you do to help?
Report success or failures using the information above
Report if you are getting the same UTF-8 message, or if you are seeing other exceptions
Report specific cases of calendar entries that you find that you have isolated to be throwing an exception
Report any other logging/tracing parameters that you may find. It looks like you can turn on “ShouldLog” using the defaults.exe command for other tasks that iTunes runs.
This syncing issue has been going on for years, under different iTunes versions, there has to be something going on and an easier way to troubleshoot this problem. I wish I had the time, but right now I fixed the problem I had and was able to resync my Outlook with my two iPads and iPhone.
The only issue I have left at the moment is the message “the ipad xxx cannot be synced. An unknown error occurred (-54). – despite this error message, I am syncing, but the message is distracting and annoying.Yes - both have time zone support and are set to London/GMT
The most recent of these aberrations was not even crossing a DST change - just a simple recurring event (which I've manually changed to single events by copy/paste).
I just tried a new one which goes back 1 hr 27 Oct - when UK clocks go back. As it's a dummy apt I'll leave it and see if if goes back to the correct time on 27 Oct! In the meantime, I can't afford for my appts to get screwed up so will continue to do them manually!
Thanks for your input. -
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name.
Maybe you are looking for
-
Uploading Delivery Schedule using LSMW
Hi All, I am uploading the Delivery Schedule documents(T-code: ME38) into SAP. I am using BAPI method in LSMW. Business Object: BUS2013 Method: MAINTAIN Message Type: PURSAG_MAINTAIN Basic Type: PURSAG_MAINTAIN01 While doing so I am getting some warn
-
Wmvs won't play in Keynote on iPad, but WILL PLAY in keynote pres embedded in iBook on iPad?!!
I have some PPT presentations I want to present from an iPad; they contain embedded video files (WMVs). I open them in Keynote on my iMac, and save them as Keynote presentations. The videos work fine on my computer. However, when I import a presentat
-
White lines in Firefox on new 27 iMac with 10.6.2
I get white lines on images being displayed in firefox. These are high resolution images from searching google images. I did not have any trouble on my 20 inch imac with 10.5. I can use Command + Shft + 4 to take a snapshot and the white lines are re
-
WLC 5508 disable wlan client still connected
I have one wlc 5508 running on latest IOS 7.116, there is one wlan abc which i have disable status and disable broadcast, but randomly still i can see from wlc dashboard there is one client connected to this wlan abc. The moment i check on the client
-
Which of the ati drivers is better in terms of energy efficiency?
Hey, I have the feeling that my hd 5850 is wasting a lot of energy. I have the xf86-video-ati driver installed, but I didnt find a tool to check gputemp and fanspeed. I'm also missing a tool to monitor power consumption in detail. Is there a detailed