Itunes 11.1.4 is bringing visual error in my windows and could not be installed correctly...

Itunes is losing feathers more and more with each ^upgrade~ 11.1.4 is unable to install on my computer...

Hello Neiksl,
Thank you for the details of the issue you are experiencing when installing iTunes.  I recommend following the steps in the article below when getting an error message trying to install iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • When dowloading itunes, constantly get error message 'Apple Mobile Device -could not be installed- Verify you have sufficient privileges to install system services.

    When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
    i am forced to abort/cancel. Can anyone help please?

    Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
    You're not alone buddy.
    Frustrated.

  • Windows update could not be installed because of error 2149842967

    Hi,
    I am trying to install the update "Update for Internet Explorer Flash Player for Windows 8.1 (KB2974008) " and when I try to install it, it states that it is not applicable to my computer which is Windows 8.1. Is there some prerequisite update
    I need prior to installing this? Event log states that Windows update  could not be installed because of error 2149842967.
    http://www.microsoft.com/en-us/download/details.aspx?id=43627
    TIA

    2149842967 = 0x80240017
    = Update is not applicable.
    the patch is already few months old; it might have been superseeded or included in some rollup.
    check your fileversions against those listed in the kb.
    http://support2.microsoft.com/kb/2974008
    MCP/MCSA/MCTS/MCITP

  • HT2404 After installing Mountain Lion, I get a message that speechsynthesisserver.app had an error and could not be installed. What does this mean? Also my mouse does not scroll up/down as it did before.

    What is speechsynthesisserver.app?  Twice I received a message from Mountain Lion that this could not be installed due to an error.  Is this significant?

    Regarding the scrolling, SYSTEM PREFERENCES>TRACKPAD>SCROLL & ZOOM, uncheck 'Scroll direction: natural.
    Ciao.

  • Error 1719 - the windows installer could not be accessed

    HP Touchsmart 610-1250x
    Windows 7 Home Premium
    error message 1719 and Internet Explorer has stopped working (not the 64 bit version)
    Canon camera software and Adobe Flash Player updated

    Hello,
    Please check this HP document and let me know if this has resolved your problem:
    Error 1719: Windows Installer Service could not be accessed.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c00267965&lc=en&product=62740
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

  • I can get to itunes but when I select anything an error comes up 'your request could not be completed.  The item you've requested is not currently available in the US store'  What is this and how to I fix it?

    no comment

    When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
    On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
    Help?

  • Error: The following NuGet packages could not be installed Microsoft.WindowsAzure.caching

    I foolishly installed a "better" version of the Azure tools foe VS2010 and now I get various error messages, including the one in the title of this post.
    The error comes up when I simply create a new Cloud Web Role project.
    When I compile I get these two:
    WebRole.cs(5,30): error CS0234: The type or namespace name 'Diagnostics' does not exist in the namespace 'Microsoft.WindowsAzure' (are you missing an assembly reference?)
    I "fixed" that one by removing the line which the wizard helpfully put in for me.
    But this one?
    ------ Build started: Project: Eu_Label, Configuration: Debug Any CPU ------
    C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\2.1\Microsoft.WindowsAzure.targets(1012,5): error : WAT080 : Failed to locate the Windows Azure SDK. Please make sure the Windows Azure SDK v2.1 is installed.
    Done building project "Test.ccproj" -- FAILED.
    But I've just installed the SDK!
    http://www.ransen.com Cad and Graphics software

    I've tried both, the first link does not have anything for Azure VS2010 tools, as far as I can see. I may have missed something.
    The second link does not refer to VS2010, and anyway links backt o you first link, as far as I can see.
    http://www.ransen.com Cad and Graphics software
    Hi Owen,
    You could click the
    Previous Versions in first link. And then you could select the matched version to your VS from the download (http://www.windowsazure.com/en-us/downloads/archive-net-downloads/
    ) page.
    Please try it. Any questions, please let me know free.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

    I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    *C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    *(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
    *C:\Program Files\Mozilla Firefox\updates
    *Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    *Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • All of a sudden tonight when I went to sync with my iTunesMacPro, I received an error message that the iPhone could not be sync'ed because it needed 6.25 GB more space

    I have a 16 GB iPhone 4S.  Tonight when I went to sync with my iTunes on my MacPro, I received an error message that the iPhone could not be sync'ed because it needed 6.25 GB more space. I still have 2.5 GB free. I sync'ed last night fine.  How could I need 8.75 GB (6.25 +2.5) more space on a 16GB iPhone.  I have added nothing but audio podcasts to my iTunes library on my Mac in the last two days and I have not change the sync setting on my iPhone.  Something has gone haywire.  Any ideas.  Mahalo, Oahu Guy

    I resolved this after some analysis.  Turnes out that iTunes was not recognizing that my music was already installed on my iPhone, so when I tried to sync, iTunes was attempting to load all my music a second time, and there was not enough room on my iPhone for that.  I did a restore from backup today and this appears to have resolved the problem.  I initiatied an iTunes sync and it worked fine.  Not sure where the glitch was.  Could have been in the latest update of the iTunes software.  Not sure.  Anyway, I'm good now.
    Oahu Guy

  • I keep getting the error "zotero could not be installed because firefox cannot modify the needed file". Any suggestions on how to fix this?

    After downloading Zotero (a plug in that is in theory custom-designed for firefox), I get an error message that says "zotero could not be installed because firefox could not modify the needed file". That's all the detail I have.

    You get this error if you install an extension that needs to be unpacked in order to work properly, but this isn't happening. The default is to copy the file to the extensions folder and rename the file part to the ID of the extension.
    *https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    You can try to set the extensions.alwaysUnpack pref(s) on the <b>about:config</b> page to true.
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
    If this hasn't helped then also delete the addons.sqlite file if present.

  • File is damaged and could not be repaired error.

    I am retrieving a SSRS 2005 report Pdf through .net coding.
    when i am browsing that report,it is showing error "File is damaged and could not be repaired". I tried with Adobe reader 9 and Adobe Reader 8 also.Still the error is coming.
    Is there any solution for this.
    Thanks in advance.
    Kiran Mandapaka

    Couple things must help you...
    If you have Windows 7: 
    1. Click the Start button, then 'Control Panel'. 
    2. Click 'Default Programs'. 
    3. Click 'Associate a file type or protocol with a program'. 
    4. In the list that appears, locate '.acsm', click on it to highlight it, then click 'Change 
    program'. 
    5. Select 'Adobe Digital Editions' and click 'OK'. 
    6. Repeat steps 4-5 for the '.epub' extension as well. 
    If you have Windows Vista: 
    1. Click the Start button, then 'Control Panel'. 
    2. Click 'Program'. 
    3. Click 'Default Programs'. 
    4. Click 'Make a File Type Always Open in a Specific Program'. 
    5. In the list that appears, locate '.acsm', click on it to highlight it, then click 'Change 
    program'. 
    6. Select 'Adobe Digital Editions' and click 'OK'. 
    7. Repeat steps 5-6 for the '.epub' extension as well. 
    If you have a Mac OS: 
    1. Hold the Ctrl button and click on the .acsm file. 
    2. Click 'Open With', then click 'Other...'. 
    3. In the list of programs displayed, select Adobe Digital Editions. 
    4. Check the 'Always Open With' box so the .acsm file type will always open in ADE. 
    5. Repeat this process for the .epub extension as well.

  • When downloading itunes onto my windows 7 pc I get the following error message "this installation package could not be opened verify that the package exists and that you can access it"

    I am having trouble downloading Itune, icloud etc onto my Windows 7 PC and keep getting the following error message "this installation pack could not be opened, verify that the package exists and that you can access it"

    tried downloading the quicktime installer, I get the same message with it too

  • When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes.  Not a fix.  Help?

    When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes.  Not a fix.  Help?

    after perusing other subjects with playback issues: 
    this is the fix: 
    -Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
    -Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

  • My nano will no longer sync to itunes.  I tried to restore nano and received error message 1437 that nano could not be restored.

    My nano will no longer sync to itunes.  I tried to restore it and error message 1437 said it could not be restored.  Any thoughts on how I can sync or restore?

    Good day billoelwein,
    If you are having an issue with your iPod nano being unable to restore,  you may want to first try resetting the iPod. See the directions in this article -
    Reset your iPod - Apple Support
    If the issue is still present after a reset, you may need to restore your iPod nano back to factory settings. See this article -
    Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

Maybe you are looking for

  • I can't download a theme because the download button is grey

    I can't download a theme for Firefox. The Download button is gray and when I click it a drop down menu appears:"To install this add-on and thousands more, get Firefox, a free and open web browser from Mozilla. Learn more about Firefox or download any

  • Configuring Solution Manager: Alternative Role to SAP_ALL

    This is a general question regarding configuring Solution Manager and note 834534.  I am configuring Solution Manager 7.0 at a client site.  The main components that I am configuring are on the Monitoring and Operations side; for example, System Moni

  • Pga info

    Hi, Is there any query for PGA? like sga we can find what are the parsed statements currently in sga by v$sqlarea.

  • Unable to sync due to server error

    I keep on getting server error on a 25MB PSD file sync to Creative Cloud. The main Creative Cloud desktop app says "Unable to sync files" and when I click on "Learn more" I get a dialog saying "Unable to sync <file name> due to server error". Perhaps

  • 2 error, one on compile and other when run.

    i purchase the book Java 6 in 21 day, nice book, when i compile "javac" appaer this mssg: error: Class names, 'HelloWorld, are only accepted if annotation processing is explicitly requested 1 error i copy and paste the helloworld code from another th