ITunes 11.1.5 does not launch on Mac OS X 10.6.8

Just updated iTunes to 11.1.5, now it does not launch. Is it worth trying to fix, or better to try and install an earlier version?

Click here and buy the DVD.
(89921)

Similar Messages

  • JMC does not launch on mac osx

    I downloaded jdk1.7.0_45.jdk on mac osx 10.7.5 so I could use JMC. It started up once, and I was able to connect to a vm, but after the first time, it just hangs once the splash screen launches. I tried to turn debug with the -debug flag, but don't see any output anywhere. Anyone have any suggestions?
    I put a stack trace on SO: java - JMC does not launch on mac osx - Stack Overflow
    thanks for any help

    I think I've seen this as well. Will investigate.
    Did you add the -consoleLog flag to get the output in the Terminal window?
    You could try deleting your ~/.jmc folder and see if that makes any difference.

  • Citrix application does not launch in MAC using Firefox 2.0 and new version not compatible with MAC i am using.Please advice.

    I am unable to launch citrix application in MAC using firefox 2.0 and when we try to upgrade Firefox it gives a mssage that new version is not compatible with the MAC i am using.
    Please advice as to what can be done and the MAC i am using is a old one.

    We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
    [[Image:aboutcrashesFx29|width=520]]
    <br><br>
    Thank you for your help!
    More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

  • HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

    Hi,
    I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
    I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
    Does anyone have any other resolutions?
    Many thanks

    Hi Carolyn,
    Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
    Thanks

  • After upgrading to iTunes 11 application does not launch and is disrupting other programs

    Hello!
    I have trying to solve this problem all day:
    After updating to iTunes 11 this morning, the application does not launch.
    Furthermore, Windows Media Player, Win DVD8 and my Email Program fail to launch as well.
    I have been through all support pages on iTunes, on support pages on the Windows 7 Forum, and I
    read the answers given in the discussion.
    I have tried and applied the solutions given, but none of them worked.
    What happenes is iTunes tries to launch for a second, then stops, but the process keeps running
    in the task manager.
    All methods through MSCONFIG failed. Uninstalling and re-installing (in the correct order) iTunes, related
    programs and QuickTime failed as well.
    I am on a Windows 7 Home Premium 65 bit desktop computer.
    Up until the update this morning everything was running fine.
    Any suggestions are welcome.
    Thank you very much in advance.

    Solved it.
    I had a program running in the background, which did not get picked up by MSCONFIG.
    I looked at the services on CCCleaner and there they were, many instances of this program, slowing the
    computer down and preventing other programs (including iTunes) from functioning.
    Turned them all off, and iTunes and all other pgms work again.

  • I have downloaded and installed Lion. iTunes does not launch when I connect it to my mac.

    Hi.... i have downloaded and installed Lion. iTunes does not launch when I connect it to my mac. The correct box is ticked in 'Summary'. Any ideas? Thx. The same thing happens with my ipad.

    Hi there Bry,
    If you want to be able with out it syncing automatically, you can disable the automatic syncing feature following the instructions in the article below.
    iTunes 11 for Mac: Require a prompt before automatic syncing
    http://support.apple.com/kb/PH12120
    Hope that helps,
    Griff W.

  • ITunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

    Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

    Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

  • Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

    Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
    First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
    TKS !

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • ITunes 9 Home Sharing does not work on Windows 7 x64

    iTunes 9 Home Sharing does not work on Windows 7 x64.
    Getting the following error message:
    Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
    This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
    I've just upgraded my iPhone to OS 3.1 using it this morning.
    Please advise.
    Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
    Ivan Farkas
    <edited by host>

    I am using Windows 7 x64.
    I am running iTunes 9.0.2.25
    I am running Mcafee.
    I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
    YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
    I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
    I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
    P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
    Message was edited by: turcott

  • I connect my iPad to my PC and open iTunes, but the iPad does not show up in sidebar.  I want to sync. How do I do it?

    I have my PC on, then plug in my iPad (which is on) and open iTunes.  The iPad does not show up in the sidebar.  How do you get it to show up so that I can select the iPad and then configure the sync settings in each of the settings panes....hoping that these actually show up.
    In the manual it says "log in to your computer user account before connecting iPad".  I am the only user of this PC...does this mean some other user account.  I am confused.  I need "baby steps" to tell me how to do all this....very senior and just learning about this wonderful machine. I will very much appreciate your help.

    If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that.  If you are using iTunes 11 go to View>Show Sidebar.  Now see if your iPad appears under Devices on the left side when you connect it.  If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
    If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.

  • The "edit in" does not launch if I make any develop changes.  I am using LR 5.6 and all of my plug ins are properly installed, up to date and were working just fine.  Edit in does work if I reset the image or load an unmodified DNG.

    I am using LR5.6 on a Windows 7 machine with plenty of memory.  LR, CS5 and all of my plug ins have been working just fine.  Tonight I've found that if I make any kind of significant adjustments to an image, and the go to "Edit in.." that function does not launch.  I can use the Edit in command on an unmodified image, or if I reset the modified image.  I have the issue with all of my plug ins, including Photoshop, all of the Nik software, RadLab, and OnOne.  I believe that all of the plug ins are current.  I've been working with them yesterday and I had no issue.  I cannot recall anything that has changed since then, and I have not installed any software.  I'm at a loss!!  Please help!

    I have traced the problem to a corrupted profile.  When I captured the images in question, I also used Color Cherckr to create a profile for processing.  When I apply that profile to the adjustments I make, I can no longer "Edit In".  If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue.  Something seems to have corrupted the new profile.  I will re-create the profile and see if the issue is resolved.

  • I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

    I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts.   All the instructions on synching start with "find your device in the device window".  But what if you have no device window?

    Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
    I thought the libraries were the same.

  • Hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

    hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

    Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
    (90452)

Maybe you are looking for

  • I need help setting up a mail account

    I have had a mac for a while and I am trying to set up an email account with mail. I click on the postage stamp and then I try to type in a username and password and it says mail.mac.com has failed and wont let me set up anything...Does anybody have

  • Need help in DECODE statement

    I have a scenario like if account no is 0001 or 0002 or 0003 then account_flag <> 'Y' ELSE IF account no is 00009 then account_status <> 'Y' How to write DECODE statement for this in Where part of select statement Note: account_flag and account_statu

  • 2 Step Transfer for Special Stock Problem

    Hi, We had just activated business function LOG_EAM_ROTSUB and LOG_EAM_ROTSUB_2 in our system. This gives us flexibility in handling special stocks and among other allows us to use mvtyp 313 with special stock. Referring to SAP Help page here it is p

  • Export JPEG size

    Hi, can someone explain the following. I've just exported some photos for printing in Lightroom and set the size to 100% and the JPEG quality to 100%. On one photo the export size is 10.1Mb when I then open file and resave it, still keeping the image

  • RV042G fails to work with Public Wan IP when connected to Cisco SG300

    Am using a RV042G with a Fiber Optic connection terminated on WAN1 It was working fine untill received a new IP pool . When we configure with the ip on wan 1 and connect the SG300 the WAN Status shows connected but no internet connection. The wan ip