ITunes 11.1 airplay problem with appleTV

Since i installed itunes 11.1 my airplay with Apple TV doesn't work properly. Music is only played for a while then nothing?
Someone the same problem?

The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

Similar Messages

  • Having problem with appletv iTunes Radio. Music stops, get spinning wheel, never restarts.

    Having problem with appletv iTunes Radio. Music stops, get spinning wheel, never restarts. If I switch to another station it plays immediately, but it too sometimes stops for the same reason. Wait for 10 minutes for it to restart, then switch stations again. I've tested my download speed when it happens it's fine.

    What was the connection speed when you tested
    Make sure DNS is set to automatic
    Reboot ATV and router
    If on wifi try ethernet

  • When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly

    When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.

    I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
    Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again.

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • Can't install itunes due to a problem with windows installer package

    hello there i can't install itunes due to a problem with the windows installer package i found a page on this site (here is the link) http://docs.info.apple.com/article.html?artnum=304405 i done every thing on it and i still haven't been able to fix the problem i have tryed the following unstalling itunes deleteing the registry keys deleteing all the temp files disableing all anit-virus software and anit-spyware. runing cc clearner downloading a new installer for itunes and windows installer and the script thing. and trying to reinstall. nothing seems to work i don't know what else to do this is the error message i get when i try to install i tunes. "there is a problem with this windows installer package.
    A program required for thsi install to complete could not be run.
    Contact your suupport personnel or package vendor."
    Please Help i would be most greatfull for any advise given
    Message was edited by: Joe_TLC

    I pulled my brains out trying to figure this bug out and I may have a solution for you.
    All of it installed fine in my desktop, but a friend's laptop got the error you mentioned on quicktime, itunes, flash, officeXP and about anything else I tried to load for him.
    If you look in: C:\documents and settings\<username>\Local Settings\Temp there will be an iTunes install log...open it in Notepad and see if it isn't exiting with a 1619 error while running msiexec.exe
    If this is the case, this fix should work for you.
    Seems some configurations of XP (and possibly Vista) aren't allowing full administrator rights to the account you set up when you installed XP (even though User Editor says you do have those rights.)
    I read 2 MS articles and turned off simple file sharing, then gave ownership of the entire C: drive to the administrator. Logged the admin account off, logged his "admin" account in, and then gave rights to his personal directory to his account (c:\docs and settings\<username>)
    Once I did that, every install that had previously errored out performed flawlessly.
    The MS articles in question:
    http://support.microsoft.com/?kbid=316309 (1619 error)
    and
    http://support.microsoft.com/?kbid=308419 (how to set special permissions)
    Hope this helps!
    Doc

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

    Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

    It's probably broken. Is there an error number displayed by iTunes?

  • Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone or iPad.

    Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Mac doesn't have iCloud, preferences still shows MobileMe. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone 3 or 1-1/2 year old iPad. I suspect I need to update OS, but as software update isn't telling me to do so, can I? What version would I need to go to?

    Your MacBook Pro can be updated to run Mac OS X "Snow Leopard". Buy it. That will enable you to run the latest iTunes version.
    Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
    Elsewhere: call the phone number in the Apple Online Store
    Apple's price is $19.99, £14.00, €18.

  • TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

    my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service  Apple Mobile Device  failed to start. Verify that you have sufficent priveleges to start system services.

    I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
    Thanks bluebanana 66

    Hi bluebanana 66,
    Thanks for visiting Apple Support Communities.
    There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Best,
    Jeremy

  • Cant install itunes - "There is a problem with this Windows Installer package.  A DLL required for this install to complete could not be run."

    Can't install itunes - "There is a problem with this Windows Installer package.  A DLL required for this install to complete could not be run."
    Using Windows 7

    Hi Acedrvr48,
    I found an article that explains steps to take if you are having trouble installing iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    I hope this helps!
    - Ari

  • When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

    When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • Error message -ITunes has detected a problem with your audio config...HELP

    error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
    ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help me

    I've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
    First ...
    ... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    Next ...
    If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
    Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area?

  • ITunes Opens, But Won't Play/iTunes Has Detected A Problem With Audio

    iTunes 7.4.3 and XP Pro on Dell laptop. The application opens, but no song plays. It appears at the top, but stays at zero. It keeps saying, " iTunes has detected a problem with your audio configuration." When in control panel, it says there is no audio device. Already checked it as default player. Tried repairing and nothing. Is it a driver? The last time I installed itunes on a pc, about 6 months ago, it worked fine. Maybe try an older version? Any help is appreciated.

    See if this helps:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    http://docs.info.apple.com/article.html?artnum=304424

Maybe you are looking for

  • Using nclob in Oracle

    Hi All, In our Oracle database,one of the fields is of type nclob. I need to call a stored proc which has this field(nclob) as OUT parameter. Since JDBC does not support nclob,how do I handle this situation? Thanks

  • Need dynamically generated ( in PL/SQL) Month in column header.

    Hello, I need to dynamically display the month in a column header and have tried using PL/SQL . I can paste following in the "Column Atributes" PL/SQL heading type to show names in the column headings: return 'RESOURCE_NAME:TEAM:PROJECT' but I need t

  • HT201334 Apple configurator profile question

    How can you set the priority of profiles to install? Also, if one profile has a setting that overides another, which takes precidence?

  • IPhone won't sync after installing Leopard

    Hi, This weekend I updated my Mac Mini's system to 10.5.5 from 10.4.11 and I discovered that my iPhone won't sync now. I do get the little bleep sound when I plug it in and it will charge, but it won't sync. I have tried rebooting both the Mac Mini a

  • Newbie doing something wrong [?]

    Completed some online training and was all excited creating my first video. When I export the 6 minute video, it saves a 23 minute video with all this black video at the end. My work area [the gray bar above the video] is set to the end of the video