ITunes 11.1 for Windows 64 bit not downloading, says a problem occurred with the installer.

iTunes starts to download and the pop-up asking to allow Apple Inc. to make changes to the hardrive comes up but the installer then says "The installer encountered errors before iTunes could be configured. Errors occured during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
I have tried using different web browsers to install it, all with the same error message. Anyone know how to fix this please?

I've updated and restarted my computer and iTunes has now successfully installed.

Similar Messages

Hi, can anyone help me because I've been trying to download the iTunes and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..

Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.

it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

I am trying to install Icloud on my pc but it will not download.It tells me to check the installer.

I just bought an Ipad ,and I need to download Icloud on my pc, I am using windows vista servpack2 and I use Ie9.When I start the download,it goes almost to the end and comes up with a window that tells me the is a prblem with the installer?Is it my pc or the download?

What is the exact error message?

ITunes 10.5 for Windows 7 not connecting to iTunes store.

I updated to iTunes 10.5 today hoping that Apple fixed the connection problems which came with previous versions of iTunes for Windows. Unfortunately I was wrong. After installing 10.5, I cannot connect to the iTunes store...again. The progress bar at the top locks (along with the message "Accessing iTunes Store") and after 30 seconds all I get is a blank page. This is exactly what has happed in the last couple of versions of iTunes for Windows. I tried some of the 'netsh' fixes seen on other posts and this did not solve the issue. I also tried unistalling the specific AppleApplicationSupport software (in this case 2.1.5) and re-installing the 1.5.2 version (which fixed the connection problems on the previous version of iTunes) as seen on other posts but doing this will not work either. Any suggestions out there?

since other people aren't having this same issue you need to try troubleshooting your own machine and network connections to fix this, it's most likely not due to apple software.
Reconfigure any security software to allow Apple's servers to pass.
Useful information for configuring your security software:
IMPORTANT: iTunes must be allowed to contact Apple using the following ports and servers:
          ▪          port 80
          ▪          port 443
          ▪          phobos.apple.com, deimos3.apple.com, albert.apple.com, gs.apple.com, itunes.apple.com, ax.itunes.apple.com, ax.init.itunes.apple.com, ax.phobos.apple.com.edgesuite.net
iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
iTunes also contacts VeriSign servers during an iPhone restore and activation:
          ▪          evintl-ocsp.verisign.com
          ▪          evsecure-ocsp.verisign.com
For more information see Update and restore alert messages on iPhone and iPod touch
Temporarily disable or uninstall your security software
If the current available version of your security software is incompatible with iTunes, you can disable the security software and test if it is the source of the issue. It might also be necessary to temporarily uninstall security software after making sure you can reinstall it and note any required licenses. A temporary deinstallation might be required because parts of some security software remain active in the background though they appear to be deactivated.
To reduce any security risks that security software is designed to prevent, consider making sure all files needed to reinstall it are available and disconnect network connections before uninstalling security software. Should this not be possible, such as if a download without active security software is required, that required step should be the only process completed without security software. For assistance in checking your configuration, disabling, or uninstalling your security software, please contact the manufacturer.
Once disabled or uninstalled, perform only the steps required to verify your issue has been resolved. Complete whatever update, restore, syncing, back up, activation, or other task you were troubleshooting. Once that task is complete, install and configure compatible security software to ensure your PC is protected.
If it isn't a program or software on the computer contact your Internet Service Provider and/or Router Company to configure or disable the firewall in the router settings.
To isolate the issue to this you can also try disconnecting the router and plugging your computer directly in to the modem but this does not help for troubleshooting time-out issues directly on any apple mobile devices only if you are syncing or going through iTunes on the computer.

Itunes 10.5 for windows will not burn cds. Can you help?

I installed the 10.5 version of Itunes and it will not burn blank cds.
System: MIcrosoft Windows XP 2002. 32bit. Service Pack 3.
Solutions Tried:
--Clean re-install of Itunes
--Downloaded GEAR drivers
--Deleted and re-added upperfilters to registry (with correct GEAR string)
--Tested CD burner (NERO works)
--Reinstalled CD drivers
I am unable to solve the problem. Any suggestions would be much appreciated.
BF

Thanks for the tip re. cntrl v. I've copied the diagnostics below.
I've tried all of Apple's troubleshooting advice without success. For example, my burner (and drivers and cables etc) all work fine. I've also tried all of their 'advanced' steps in relation to downloading GEAR drivers etc. Nada.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
Current user is an administrator.
The current local date and time is 2011-11-15 07:16:17.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.2.0),
D: ASUS DRW-20B1LT, Rev 1.00
Audio CD in drive.
Found 21 songs on CD, playing time 76:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:57:29
Track 3, start time 07:15:42
Track 4, start time 11:14:32
Track 5, start time 15:31:65
Track 6, start time 18:07:38
Track 7, start time 21:10:55
Track 8, start time 24:25:15
Track 9, start time 28:10:66
Track 10, start time 31:00:04
Track 11, start time 34:48:61
Track 12, start time 38:26:67
Track 13, start time 44:06:13
Track 14, start time 47:07:49
Track 15, start time 51:46:37
Track 16, start time 54:25:14
Track 17, start time 57:44:50
Track 18, start time 62:22:03
Track 19, start time 65:06:48
Track 20, start time 70:30:43
Track 21, start time 73:17:08
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   16 24 32 40 48.
The drive CDRW speeds are:   16.
The drive DVDR speeds are:   16.
The drive DVDRW speeds are:   16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: ASUS DRW-20B1LT on CDR media at speed 4X.

ITunes for Windows will not open, says im not authorized.

Every time I try to open iTunes it keeps giving me the error message, the folder itunes is on a locked disc or you do not have write permissions for this folder. everything worked fine until I was playing around with sharing for my network and I think I messed it up. Someone please help me. I have uninstalled itunes two times and reinstalled it with no luck. Please help me.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

Itunes 11.3 for windows will not delete podcasts.

Using itunes 11.3.8.54 will not honor the delete menu item for deleting podcasts. Podcasts are also not being deleted when the number exceeds the maximum retention.

In order to delete the podcast, start playing another track first. Sounds like the same bug that affects TV shows. The currently selected show will not go to the recycle bin, though it will disappear from the iTunes library. It's as if iTunes tries to move the file to the RB but Windows says, "No, that file is in use."
I discovered this bug after my laptop hard drive ran out of room because none of the TiVo2Go shows I'd been watching for weeks had truly been deleted by iTunes when I asked it to. All the files remained on the hard drive.

Apple Software Update for Windows will not download and update

When Apple Software Update for windows comes up, I select the items to update, I accept the eula, the bottom half of the window rolls up and rolls back down and nothing happens. I have tried uninstalling and reinstalling Apple Software Update. If I download the updated individually (outside of Apple Software Update) they work fine
Message was edited by: to_mike

Hmmmmm.
Try checking the rules in your firewall software. Is Apple Software Update being allowed full access to the internet?

While Installing iTunes, An Error Message Pops Up Saying, " An Error Occurred During The Installation Of Assembly"

Please, I Need Help Installing iTunes! [:

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Itunes 7.0 for windows will not install Error 1392

I get an error message when i try to update to 7.0 It says could not set security file for file 'C:\documents and settings\all users\application data/apple computer/itunes/SCinfo\'.Error1392

Hopglock,
You have your permissions on that folder or another folder in the hierarchy set to read only permission or some other security lock down. You need to turn off read only or change security permission so that the iTunes installer can write to
the
C:\documents and settings\all users\application data\apple computer\itunes\SCinfo
folder.

Its not actually a question. im requesting adobe to make adobe flash player for windows phones. im hoping that we get it with the final release of windows 10 on phones

im requesting adobe. plzz do it somehow

@Chris: That's odd. I too installed Windows 8 Pro x64 since launch and have been receiving/installing all windows updates including "Patch Tuesday" of every month. In fact I just checked my update history and they all show success -- none failed. Can you find any specific KB # of any update that Microsoft had issued which included updates to Flash? Also, I just checked with a friend and they too have the factory-shipped version of Flash still installed while being fully-updated.
I do see the following installed as well however the actual Flash player version was still the old one:

Just bought the photoshop touch for iPhone will not download says its not compatible with my iPhone

with my 4s running ios 6.1.2 help???

thanks I have it that far but now tring to figure out how to get the pictures to you.
thanks
t

Why does my iphone 4s not display the correct battery percentage? it can get really annoying if it turns off unexpectedly and after that another problem occurs with the phone turning off and on repeadtly

My iphone 4s recently started shutting off and on unexpectedly when updating a whole load of snapchat story's on my feed. However i also have a problem with the battery percentage, i've tried everything with it experimenting all most everything. i even changed my battery twice and i still don't know what to do
someone please help me

Hi 3Kadzo,
Welcome to the Apple Support Communities!
I understand you are having some concerns about the battery usage and percentage displayed on your iPhone 4s. I would suggest the troubleshooting steps in the following article to help isolate and resolve these issues.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
I hope this helps,
-Joe

Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2

1080p download and playback bugs in iTunes 10.6 for Windows

There seems to be some bugs in iTunes 10.6 for Windows related to 1080p video. According to Apple, the minimum specs for viewing 1080p video on a PC is:
To play 1080p HD video on a PC, you need a 2.4GHz Intel Core 2 Duo or faster processor, 2GB of RAM, and an Intel GMA X4500HD, ATI Radeon HD, or NVIDIA GeForce 8300 GS or better graphics processor.
My PC exceeds these specs (Intel i5-2500K 3.3GHz CPU, 8GB of RAM, AMD Radeon 7970 video card, 30" Apple Cinema Display). The first bug appears when I go into the preferences setting and switch the download preference fom 720p to 1080p, which triggers a warning box that says:
This computer may not be able to play 1080p videos. You can still download these videos for use on other devices.
That's odd but I press "OK" and downloaded the 1080p copy of a TV episode. When I press play, another warning box popped up:
Video is too large. The 1080p version of [show] is too large to play on this computer. You can choose to play a smaller 720p version of this movie below. This message will be dismissed in XX seconds.
The message gives you three options: PLAY SMALLER VERSION / OK / CANCEL. If I select OK or simply let the timer run down, the 1080p video starts playing without any problems. Anyone else seeing this?

Oh that clarifies things, I see what you mean. The error message still confuses me because even your smaller Acer monitor matches the pixel resolution of the 1080p video - the video doesn't exceed the monitor's pixel ratio so it's not technically "too large" as the error message says. The 1080p video should fill your Acer monitor edge to edge while leaving black borders on the top and bottom of your Samsung. I think this is clearly a bug in iTunes.
I know what you mean about the movie opening up so that a portion of the image is off the screen but that sounds like an issue related to the default position of the window when you start a video. The default position is such that a smaller size like the SD copy probably isn't cut off but that a larger video does get chopped until you change where videos open by default. I can change the position simply closing the video while it's playing. iTunes remembers the place on the screen where I closed the video and opens all videos at the spot afterwards. Does that not work for you?

ITunes 11.1 for Windows 64 bit not downloading, says a problem occurred with the installer.

Similar Messages

Maybe you are looking for