ITunes 11.1 problem: no sound when watching movies!

Hi there
When I try to watch video on my Thunderbolt display (27 inch) connected to my MBP Retina, everything is fine....untill I go full-screen!!! Then I don't have sound anymore, only video!
Can anyone help me out on this, or do I have to wait for iTunes 11.2???
Thanks all out there!
Sven
PS I could perfectly watch videos with sound on my Thunderbolt display with the previous iTunes.

I think I just found a solution. I'll explain what I did but you may not need to do some of the steps that I did.
First, I downloaded an older version of iTunes.
Then, I backed up my older library from the "previous" folder.
I used terminal to remove the iTunes (11) application using the rm -fr iTunes.app
Then I was able to install the previews version of iTunes that i had downloaded.
For me, this older version didn't work. It gave me an error -42408 when I launched it and it wouldn't play my rental anyway. Too HD perhaps?
So, I went into software update in the App store and upgrade to iTunes 11 again.
I rebooted, played the movie and went full screen... SOUND!
Something in that procedure makes sense. I'm just not sure what. I hope it helps.

Similar Messages

Bad sound when watching movies etc..

Hi,
I bought an Mini DisplayPort to HDMI Adapter Cable @ ebay a while back, and recently Ive started using it with my macbook air (running OS X Mountain Lion)
I have this hooked up to my receiver and the image quality is superb, but the sound is not that great..
I often use to watch movies (.mkv files) and all movies have very poor sound quality. Even when its DTS-HD Master Audio 7.1..
Have someone experienced something like this?

Anyone ???? I doubt I am the only one who have had this problem..

How to hear the 5.1 sound when watching some TV chanels that are transmited with A

Hi all,
I've got some question that i haven't found an answer to on goole, finnaly i've decided to try to search at source - at Creative site. I've read many post on this forum but it seems there isn't answer for my problem.
I have got:? TV satellite receiver with? optical? out (spdif Toslink),? SB? X-Fi Audio PCI-E (with spdif In and out) and 5. speakers from Genius.
After i have connected everything (sat (OPT OUT) to sb (OTP IN) and sb to speakers) it works great as stereo but when i turn on AC3 (when watching channel which supports it) on my satelite reci'ver i can't hear any sound
In " Digital Connections, SPDIF and Dolby Digital Info" topic i've founded chatper about decoding AC3 with Sound Blaster. "2) Decode the AC3/DTS with your Sound Blaster." It is a little different explamle then my, so please can anybody tell me, how to do it ? How to set SB settings ? Should i download some additional software that will must be runing when watching TV (I dont know maybe there is something like "acti've decoder of AC3"). Maybe it it not possible at all
I just want to hear the 5. sound when watching some TV chanels that are transmited with AC3.
Please help me .
Best regards Arek.
P.S. 5. sound works, when watching DVD or avi movies with AC3 filter

with X-fi Xtreme Audio it is not possible to decode DD from spdif-in

I have no sound when watching videos or live streams which works fine with IE or Linux on the same system

I have no sound when watching videos on you tube or live streaming. If I switch to Linux everything is fine in firefox on this system but nothing with firefox in windows. If I use internet explorer everything is fine again, which seems to me to say that the problem lies within firefox 36. Can anyone help with this problem?

Tried that with the same result. I can't understand why it works with Linux (Ubuntu) and not Windows. IE works as well but I prefer to use Firefox, so I guess I'll just have to switch browsers when playing videos - weird.

My "Apple TV" is hooked up via HDMI to my Marantz receiver. Everything works fine when watching movies. When trying to watch a show or listen to music, there is no sound. Has this happened to anyone else?

My "Apple TV" is hooked up via HDMI to my Marantz receiver. Everything works fine when watching movies. When trying to watch a show or listen to music, there is no sound. Has this happened to anyone else?

Perhaps you should ask over in the iPad community, you may get better answers there.
It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
psoon, here's a link to the iPad community:
Using iPad

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

Problems with sound when closing the lid (MBP and Yosemite)

Hi
i have a MBP and Yosemite.
Before the update i could close the lid when watching movies on the mac and connecting to HDMI to my TV and the sound and images worked OK ( i uses insomnia X for being able to close the lid)
After the update, when i close the lid the images works but the sound doesn't come out from the TV but from the mac.
it was working before and not anymore.. anybody knows what this ca be?
thanks

dogan100
First time around, they gave me an apple tv for the inconvenience........ I will keep you guys posted once I find out more from the Apple Store.
Free Apple TV eh? Thats rather outstanding for a creaking on the plastic hinge cover.
Nice video, the "old door" sound of soft creaking plastic. Thats not the (2 of them) hinge sound, which (ive only heard one make the noise, on an old air) is a 'grrr' sound of the alloy creating a rubbing noise.
Yes, find out what the Apple store says. Pretty obviously the plastic hinge cover, which does nothing, is cosmetic and doesnt affect anything.
There could be a crack in the hinge cover I cant see that obviously. Another option is the cover isnt snapped into place correctly.
I wouldnt worry about it, its ultimately nothing, but youll get it serviced and fixed when you get to Apple.
Im shocked they just outright gave you a free AppleTV, thats a great 'deal' (meaning free), and top notch from Apple
heres the hinge cover pic:

When watching movie on ATP2 the display of computer never sleeps

When watching movies on ATV2 the display of computer will not go to sleep. After fiddling with setting both on computer as well as ATV2 the problem still persists. This coincidentally happened after lastest upgrade never had the problem with last firmware. Is anybody having the same problems?.

when the computer fall asleep it power down it's harddisk and it's netcard
so you would likely be more bothered if it did fall asleep because then you're atv2 would
lose the access to the media if you play media from your shared itune lib

Lost all my sound when playing movies and shows from internet

i seemed to have lost all sound when playing movies from internet. i still have "system" sounds and beeps?

The speaker is not that good but maybe yours is defective if you have the volume fully raised.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted and have a poor contact.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R" or "R".
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar

Freezing video when watching movie on 2nd monitor.

Freezing fregrently for a second video when watching movie with ful screen option.
OSX 10.6.8 system.
MacBook pro 3,1
2.2 GHZ
memory 4GB
NVIDIA GeForce 8600M GT

You won't be able to do it with the included QuickTime media player. But it can be done with other media players like MPlayer or VLC I am pretty sure. Haven't had this exact need myself but have seen other similar threads and recall the above being recommended. Good luck.

HT1657 I have no sound while watching movie from I Tunes?

I have no sound while watching movie from I Tunes?

See also:
* https://support.mozilla.com/kb/No+sound+in+Firefox
* https://support.mozilla.com/kb/Video+or+audio+does+not+play
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />

Air Screen Dims when watching movies

Hi all! This is a stupid question. I've just purchased a new macbook air 11.6 in and when watching movies (not in ful screen) the screen dims, Im assuming because of inactivity with keyboard, etc. I dont like to watch all movies in full screen, so how do I change the settings to allow for longer 'inactive' times? Meaning, I don't want the screen to dim after only 5 minutes. Thanks!

In System Preferences > Energy Saver > uncheck "Automatically reduce brightness before display goes to sleep"
Also adjust the sleep timer to suit.

Why does my sound when watching a movie in itunes fall behind?

Im running Windows 7 64bit and when I watch movies in iTunes, the sound starts running slow. It gets so bad that it starts cutting out. If I pause it and hit play again, it goes right for a minute and then starts over again. Thoughts?

Try the suggestions in this thread.

ITunes 10.0.0.68 Crash when watching purchased iStore content (TV) Vista 64

I recently upgraded to iTunes 10. I'm running on a Vista 64 bit machine. I have a number of dvd/blue ray ecopies in my library, along with content from CDs I've purchased, and an iPhone 3GS. This weekend I purchased my first TV season from the iStore (this was after iTunes upgrade to 10.x was applied). I purchased the HD version of the TV shows. So, yes, 2 versions were downloaded. As I understand it, the HD version plays on my computer and the lower res version is used for the iPhone (or other portable devices).
While watching the TV content after it downloaded, I experienced a series of iTunes crashes. When this occurred, the OS reported a DEP error. Of course, you can't set the DEP to not run with iTunes.exe - the system reports that DEP must run with iTunes. It's not clear to me if this is by design on Apple's side or not. So, disabling DEP when running iTunes is not an option for a Vista user.
I've spent the last several hours reading a number of forum posts, including several from this site. I did uninstall everything, per an article on the Apple support site and referenced a couple of times by B Noir as well. It seemed reasonable and when I looked at the Programs installed, I noticed that the installation date for the Bonjour service and Apple Software Update was different than the iTunes. This may not have mattered, but I've seen stranger stuff. I tried a repair of QuickTime before taking this great leap, but this had no effect. I did follow the complete steps as listed, including checking for stray residue after the uninstall ran. I did run a registry sweep after the uninstall and rebooted the system.
iTunes continues to crash when viewing purchased TV show content after all of these steps. As I have nothing to compare it with as far as the performance of previous versions of iTunes with purchased TV show content, I can't say with authority it is strictly an iTunes 10.x event. However, having watched more than 30 minutes of 3 different movies I have in my library (from the ecopy of dvd/blue ray), and playing several cd tracks, I believe I can state that this iTune crash only occurs with purchased content - TV shows in my case.
My iPhone 3GS syncs fine. In fact, I was able to place one of the TV shows on the phone and it plays just fine on the phone. Of course, that is the low-res version.
From the Windows Logs/Application: Application Error, Event ID 1000, Task Category (100) - Faulting application iTunes.exe, version 10.0.0.68, time stamp 0x4c7e6c10, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x00410d60, process id 0x1288, application start time 0x01cb4d7440896ecc.
EventData
iTunes.exe
10.0.0.68
4c7e6c10
unknown
0.0.0.0
00000000
c0000005
00410d60
1288
01cb4d7440896ecc
Note: The first 7 lines of this report are the same for every iTunes crash in the Application logs (and everytime it crashes, the OS pops up with a DEP error info box).
From the Windows Error Reporting:
Fault bucket 1355917958, type 5
Event Name: BEX
Response: None
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 10.0.0.68
P3: 4c7e6c10
P4: StackHash_fd00
P5: 0.0.0.0
P6: 00000000
P7: 00410d60
P8: c0000005
P9: 00000008
P10:
EventData
1355917958
5
BEX
None
0
iTunes.exe
10.0.0.68
4c7e6c10
StackHash_fd00
0.0.0.0
00000000
00410d60
c0000005
00000008
Note: The first 11 lines of this report are the same for every iTunes crash in the Application logs.
There are a series of Bonjour Service errors in the Application log as well. All of these occur after the iTunes Application Error and Windows Error Reporting are logged. At this point, I assume they are related to the iTunes crash -
EventData
440: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
It seems like this problem is occurring for many Vista and Windows 7 64 bit users (with regard to iTunes crashing when trying to play purchased content) and I'm hoping that power users in this forum can take this more detailed report of the problem and figure it out - or convince the Apple team to address it. I'd be glad to try any suggestions or provide logs if desired (let me know where to look for the logs if applicable).

Odd ... that BEX error citing the QuickTimePlayer.dll (like the DEP errors and the unknown module for the iTunes errors) also suggests old, misplaced QuickTime componentry. But the lack of any QuickTime Player launch errors, or at least relentless "software out of date" messages, speaks against that possibility.
... I think we'd better check for old, misplaced QuickTime componentry anyway, just in case. (The symptom-set for that sort of trouble is in a constant state of flux anyway, so the lack of launch errors probably can't be taken as conclusively speaking against it.)
First we'll need to adjust some view settings on the PC.
1. From the Start menu, click Open.
2. In the Organize menu, click Folder and Search Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now we'll go looking for old QuickTime stuff in the most likely locations for it to show up.
In Computer, open your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
*If you have a 32-bit version of Windows,* open the "System32" folder.
*If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
What files or folders with QuickTime in the file or folder name can you see in there? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.

ITunes 11.1 problem: no sound when watching movies!

Similar Messages

Maybe you are looking for