Itunes 11.3 for windows will not delete podcasts.

Using itunes 11.3.8.54 will not honor the delete menu item for deleting podcasts. Podcasts are also not being deleted when the number exceeds the maximum retention.

In order to delete the podcast, start playing another track first. Sounds like the same bug that affects TV shows. The currently selected show will not go to the recycle bin, though it will disappear from the iTunes library. It's as if iTunes tries to move the file to the RB but Windows says, "No, that file is in use."
I discovered this bug after my laptop hard drive ran out of room because none of the TiVo2Go shows I'd been watching for weeks had truly been deleted by iTunes when I asked it to. All the files remained on the hard drive.

Similar Messages

Itunes 10.5 for windows will not burn cds. Can you help?

I installed the 10.5 version of Itunes and it will not burn blank cds.
System: MIcrosoft Windows XP 2002. 32bit. Service Pack 3.
Solutions Tried:
--Clean re-install of Itunes
--Downloaded GEAR drivers
--Deleted and re-added upperfilters to registry (with correct GEAR string)
--Tested CD burner (NERO works)
--Reinstalled CD drivers
I am unable to solve the problem. Any suggestions would be much appreciated.
BF

Thanks for the tip re. cntrl v. I've copied the diagnostics below.
I've tried all of Apple's troubleshooting advice without success. For example, my burner (and drivers and cables etc) all work fine. I've also tried all of their 'advanced' steps in relation to downloading GEAR drivers etc. Nada.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
Current user is an administrator.
The current local date and time is 2011-11-15 07:16:17.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.2.0),
D: ASUS DRW-20B1LT, Rev 1.00
Audio CD in drive.
Found 21 songs on CD, playing time 76:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:57:29
Track 3, start time 07:15:42
Track 4, start time 11:14:32
Track 5, start time 15:31:65
Track 6, start time 18:07:38
Track 7, start time 21:10:55
Track 8, start time 24:25:15
Track 9, start time 28:10:66
Track 10, start time 31:00:04
Track 11, start time 34:48:61
Track 12, start time 38:26:67
Track 13, start time 44:06:13
Track 14, start time 47:07:49
Track 15, start time 51:46:37
Track 16, start time 54:25:14
Track 17, start time 57:44:50
Track 18, start time 62:22:03
Track 19, start time 65:06:48
Track 20, start time 70:30:43
Track 21, start time 73:17:08
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   16 24 32 40 48.
The drive CDRW speeds are:   16.
The drive DVDR speeds are:   16.
The drive DVDRW speeds are:   16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: ASUS DRW-20B1LT on CDR media at speed 4X.

ITunes for Windows does not delete podcasts when told to.

I have 30 podcasts. When I try to delete a selected podcast using either the delete key or right-click menu, I then tell iTunes to "move to recycle bin". However, many times the file remains. I just found >1GB of left over podcasts that did not show up in iTunes but are in the "My Music\iTunes\podcast.." directories.
is this a known bug or am I missing something?
Is there anyway to fix this?
Shane

In order to delete the podcast, start playing another track first. Sounds like the same bug that affects TV shows. The currently selected show will not go to the recycle bin, though it will disappear from the iTunes library. It's as if iTunes tries to move the file to the RB but Windows says, "No, that file is in use."
I discovered this bug after my laptop hard drive ran out of room because none of the TiVo2Go shows I'd been watching for weeks had truly been deleted by iTunes when I asked it to. All the files remained on the hard drive.

Itunes 7.0 for windows will not install Error 1392

I get an error message when i try to update to 7.0 It says could not set security file for file 'C:\documents and settings\all users\application data/apple computer/itunes/SCinfo\'.Error1392

Hopglock,
You have your permissions on that folder or another folder in the hierarchy set to read only permission or some other security lock down. You need to turn off read only or change security permission so that the iTunes installer can write to
the
C:\documents and settings\all users\application data\apple computer\itunes\SCinfo
folder.

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

Itunes for Windows and PC will not recognize my ipod touch 3rd generation. Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled. I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

Unable to Burn CDs in iTunes for Windows: (Will not fit, but it should.)

I am attempting to fix an issue with a friend's iTunes for Windows. Although previously this computer using this media was able to burn audio CDs through iTunes, recently, an error has appeared before any burn. When loading the proper amount of time to fit on a CD, iTunes claims:
"The songs in this playlist will not fit on one Audio CD"
"Do you want to create multiple Audio CDs with this playlist split across them?"
"This will require more than one CD to complete."
When running CD Diagnostics, I receive the following information:
++++++++++++++++++++++++++++++++++++++++++
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension XPS Gen 2
iTunes 7.0.0.70
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: 128MB DDR ATI Radeon 9800 Pro\128MB DDR ATI Radeon 9800 Pro
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\DiskWDCWD5000KS-00MNB0____________________07.02E07, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX216E_____________________PD01___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Drive is empty.
E: SONY CD-RW CRX216E, Rev PD01
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 0X.
++++++++++++++++++++++++++++++++++++++++++
Additionally, I copied the iTunes playlist to a new drive that was recently installed with Windows, and the same problem occurs when rebooting under that system.
Also, please note that this issue occured prior to updating to iTunes 7.
Any assistance anyone could offer would be greatly appreciated by both myself and my friend.
Thank you so much,
Keith
iTunes 7 Windows XP Pro

Hey,
Under warranty you'd be better then to call into phone support, if something has to be done with the notebook, they'll be able to set that up with you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I worked on behalf of HP.

Itunes for windows will not play videos

Videos will not play back insde iTunes for windows on a windows 7 machine. I have uninstalled and reinstalled iTunes. The video starts to play audio and a still image on screen and after a bout 3 seconds the audio stops.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

ITunes for Windows will not play the next song in the list

Hello,
I cannot get iTunes to play the next song in my list (general list, not a playlist). The random icon and/or repeat icon is not blue. Every time I press the next button (two arrows to the right), it picks another song from my list, instead of the one that is directly beneath the one that is playing.
I have iTunes version 11.0.1.12.
Has anyone have this happen before and how did you solve it? Thank you for all your replies.
Ilona T.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

ITunes for Windows will not open, says im not authorized.

Every time I try to open iTunes it keeps giving me the error message, the folder itunes is on a locked disc or you do not have write permissions for this folder. everything worked fine until I was playing around with sharing for my network and I think I messed it up. Someone please help me. I have uninstalled itunes two times and reinstalled it with no luck. Please help me.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

Itunes for windows will not update

Just tried to update itunes for windows and nothing happened. please advise

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

ITunes 10.5 for Windows 7 not connecting to iTunes store.

I updated to iTunes 10.5 today hoping that Apple fixed the connection problems which came with previous versions of iTunes for Windows. Unfortunately I was wrong. After installing 10.5, I cannot connect to the iTunes store...again. The progress bar at the top locks (along with the message "Accessing iTunes Store") and after 30 seconds all I get is a blank page. This is exactly what has happed in the last couple of versions of iTunes for Windows. I tried some of the 'netsh' fixes seen on other posts and this did not solve the issue. I also tried unistalling the specific AppleApplicationSupport software (in this case 2.1.5) and re-installing the 1.5.2 version (which fixed the connection problems on the previous version of iTunes) as seen on other posts but doing this will not work either. Any suggestions out there?

since other people aren't having this same issue you need to try troubleshooting your own machine and network connections to fix this, it's most likely not due to apple software.
Reconfigure any security software to allow Apple's servers to pass.
Useful information for configuring your security software:
IMPORTANT: iTunes must be allowed to contact Apple using the following ports and servers:
          ▪          port 80
          ▪          port 443
          ▪          phobos.apple.com, deimos3.apple.com, albert.apple.com, gs.apple.com, itunes.apple.com, ax.itunes.apple.com, ax.init.itunes.apple.com, ax.phobos.apple.com.edgesuite.net
iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
iTunes also contacts VeriSign servers during an iPhone restore and activation:
          ▪          evintl-ocsp.verisign.com
          ▪          evsecure-ocsp.verisign.com
For more information see Update and restore alert messages on iPhone and iPod touch
Temporarily disable or uninstall your security software
If the current available version of your security software is incompatible with iTunes, you can disable the security software and test if it is the source of the issue. It might also be necessary to temporarily uninstall security software after making sure you can reinstall it and note any required licenses. A temporary deinstallation might be required because parts of some security software remain active in the background though they appear to be deactivated.
To reduce any security risks that security software is designed to prevent, consider making sure all files needed to reinstall it are available and disconnect network connections before uninstalling security software. Should this not be possible, such as if a download without active security software is required, that required step should be the only process completed without security software. For assistance in checking your configuration, disabling, or uninstalling your security software, please contact the manufacturer.
Once disabled or uninstalled, perform only the steps required to verify your issue has been resolved. Complete whatever update, restore, syncing, back up, activation, or other task you were troubleshooting. Once that task is complete, install and configure compatible security software to ensure your PC is protected.
If it isn't a program or software on the computer contact your Internet Service Provider and/or Router Company to configure or disable the firewall in the router settings.
To isolate the issue to this you can also try disconnecting the router and plugging your computer directly in to the modem but this does not help for troubleshooting time-out issues directly on any apple mobile devices only if you are syncing or going through iTunes on the computer.

ICloud Control Panel for Windows will not install on Win 7 64-bit

I already installed iTunes 10.5 and I downloaded the iCloud Control Panel for Windows and when I tried installing it I got the following error message:
I cannot find a a 64-bit of iCloud (if that is what I need). The 64-bit iTunes installed ok. What am I doing wrong?

I don't know how to answer that question, Rob, or why I would be able to. Obviously people will have different configutrations. It really just points to the question I am asking. I can only assume Adobe hasn't tested it thoroighly enough and is not making any effort to find out why, which suggests to me they don't really care enough about their users to bother. This issue has been raised often enough and nothing has been done.

Quicktime for windows will not play AVI

Hi. All I get when I play my .AVI's on Quicktime for windows is a white screen? No picture no sound?
They play fine on my Apple Mac Quicktime.
Thank

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

Itunes 11.3 for windows will not delete podcasts.

Similar Messages

Maybe you are looking for