ITunes 11.4 stops working. What do I do

I have Win7
The update 11.4 stopps after 10secs
I have worked thru the diagnostics suggested in
iTunes for Windows Vista, Windows 7, or Windows Languages English
8: Fix unexpected quits or launch issues
and iin
iTunes: Troubleshooting issues with third-party Languages English
iTunes plug-ins
I got it working for about 1 hour but it has stopped again. Why is iTunes so hard?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

Similar Messages

  • HT201210 I was updating to the latest software thru iTunes and it failed to update and giving an unknown error (3). My phone stopped working what to do. Please help...

    I was updating to the latest software thru iTunes and it failed to update and giving an unknown error (3). My phone stopped working what to do. Please help...

    Hi there bugzystein,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Itunes store has stopped working On windows 8

    with the most recent update of iTunes (2015, 12.1.1.4- or even later) The iTunes store has stopped working. Every time I open it a window pops up saying "ITunes has stopped working" and then I am forced to close the program and can't get back on it. I own a PC with windows 8. Previously I've never had this issue before. Even when I open ITunes in SAFE MODE the same window still pops up with "ITunes has stopped working'. What is happening and how can I fix this issue?

    Greetings Willyme,
    As someone who uses iTunes just about every day, I know I would be unhappy with things if I could not get it to launch. Let's see if we can get you back up and running. I would suggest that you troubleshoot using the steps in this article - 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • My apple ID has stop working what do I need to do?

    My Apple ID stop working what do I need to do?

    Stopped working in what way??    Are you using it with an itunes account or an icloud account?

  • ITunes makes keyboard stop working?

    This is a brand new PC that was just built, running Windows 7 Professional (64-bit).
    I have tried 3 keyboards, one wired and and two wireless, all USB (this computer doesn't have a PS/2 connector). All of them are fine on other PCs. The keyboard works fine until I install iTunes, then it stops working. When I reboot, the keyboard works in the BIOS, but as soon as I get into Windows, it stops working again. If I uninstall iTunes, it's fine again. Reinstall iTunes, again, no keyboard.
    Any idea why this is happening, or suggestions for fixing it?
    Thank you!
    Cyn

    I have been using nvidia's TwinView for a long time, currently with two different monitor sizes. There is no need to do anything with udev if you have your xorg.conf set up properly. Here's what mine looks like, though you will have to adapt it according to your hardware.
    Section "ServerLayout"
    Identifier "Dual Layout"
    Screen "Screen0"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "on"
    Option "AutoEnableDevices" "on"
    Option "AllowEmptyInput" "on"
    EndSection
    Section "Monitor"
    Identifier "Acer"
    HorizSync 30-81
    VertRefresh 56-76
    EndSection
    Section "Device"
    Identifier "GeForce 210"
    Driver "nvidia"
    Option "NvAGP" "3"
    Option "NoLogo" "1"
    Option "RenderAccel" "true"
    Option "AddARGBGLXVisuals" "true"
    Option "TwinView" "true"
    Option "SecondMonitorHorizSync" "24-70"
    Option "SecondMonitorVertRefresh" "56-75"
    Option "MetaModes" "1680x1050, 1600x900 @1600x900"
    Option "TwinViewOrientation" "RightOf"
    Option "WrappedFB" "true"
    EndSection
    Section "Extensions"
    Option "Composite" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "GeForce 210"
    Monitor "Acer"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1680x1050" "1600x900"
    ViewPort 0 0
    EndSubsection
    EndSection
    It is best to let as much as possible be handled automatically, but getting two screens working properly requires a bit of tweaking.

  • My iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

    my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?

    My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do? iPhone 5

    Clean the lint/debris from the charging port and plug the cable in.

  • I keep getting this pop up message while in iTunes -- MobileDeviceHelper has stopped working -- How do I get it to stop?

    I keep getting this pop up message while in ITunes -- MobileDeviceHelper has stopped working -- How can I get it to stop?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have upgraded iTunes now it stops working after a few seconds.Help?

    i have upgraded iTunes now it stops working after a few seconds.Help?

    Hi Andrew,
    If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    If you are using Windows XP, you may want to use this article -
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT1414 my ipad shut off while using my battery is charged and i did itunes restore did not work what now

    itunes restore did not work what do i do now

    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    The copy above was copied from this website.
    http://support.apple.com/kb/TS3694#error14

  • When synching my ifone 4 with itunes the synch stops working.

    When synching my ifone 4 with itunes the synch stops working. and an error message saying the program has stopped working correctly and windows will close the program and notify me when a solution becomes available. I've unistalled i tunes and assoctiated programs and done a re-boot and installed I-tunes again, but still got the same problem. Any suggestions?

    I've unistalled and double checked the c: drive as per the Apple instructions and re-loaded itunes and still get the same error. It seems to be when its synching the phtographs when the problem occurs.

  • Hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

    hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
    2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

  • My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

    my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

    Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • My sleep button and volume button stop working. what shall i do?

    my sleep button and volume button stop working. what shall i do?

    Try to restore "as new ipod" without using the latest backup, in case it contains corrupt data causing your problem. How to back up your data and set up as a new device

  • I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

    I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

    Press the Power button for about 10 seconds to shutdown the computer. Wait a couple of minutes then restart. If it restarts OK, then immediately repair the hard drive:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Itunes is asking that I edit payment info, but will not accept any changes to allow me to purchase music? I have changed cards, reentered information, uninstalled and re-installed Itunes. Nothing is working, what do I need to do?

    Itunes is asking that I edit payment info, but will not accept any changes to allow me to purchase music? I have changed cards, reentered information, uninstalled and re-installed Itunes. Nothing is working, what do I need to do?

    See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

Maybe you are looking for

  • Printing only 2 inches of image on paper.

    Hello: I'm printing from Lightroom CC in the Print module on an Epson 3880.  I just successfully printed a photo on 13 x 19 paper.  When I tried to print a second copy of the same image and didn't change any setting, the print came out with only 2 in

  • QM Inspection of a Service

    The issue I have involves request to perform QM Inspection when purchasing via a service master, not a material master.  Not MM-knowledgeable enough to understand why material masters are not being used.  That decision has already been taken by part

  • How to change language in Cloud account from German to English? [was: Please help!]

    I am an English girl living in Vienna and have just purchased the CC. I'm happy about that! However, the language on my cloud account is German and I have no idea what I need to do now. I don't speak German. How can I change the language on my cloud

  • Hi any body having configuration material on Generic with holding tax

    Hi SAP Guru's Any body having configuration material on Generic with holding tax Please help me on this because presently i am working UK porject when i am executing transaction code S_P00_07000134  getting no list genarated Please give me some input

  • Documents won't trash

    I'm having trouble getting rid of documents after sending them to the trash. When I select "empty trash" I get a message that says the documents are in use even though I've already quit the applications.