ITunes 11 AirPlay 15000 error

I am currently running iTunes 11.0.1 and I am trying to play music through AirPlay through my Denon 2113 receiver, but I keep getting a 15000 error.  I have searched for a solution and I have come up with nothing.  Does anyone have any ideas or solutions?

This thread may help
https://discussions.apple.com/thread/2586181?threadID=2586181

Similar Messages

  • Apple TV/Airplay -15000 error also with video hanging

    Ok today I had this problem:
    TV Shows and songs I tried to stream from Home sharing just hung and would not play.  If I scrolled through TV Shows (using the Remote app) I could see the still frames but there was no way to get the video going.
    Airplay on my computer (iMac) would come up with -15000 error if I tried using Apple TV through remote speakers.
    Solutions I heard were:
    Toggle the firewall on and off again. (DIdn't work)
    Go to System Preferences Security>Airport>TCP/IP>Turn iPv6 setting to off.  (This did not work for me, and also LIon doesn't let you turn this off anymore).
    My solution was to Reset my Apple TV.  Just go Settings>General>Reset.  I reset my settings (as opposed ot restore to factory settings).   I had to re-enter my User-ID and password but it got everything running again.
    Hope this helps.
    Tony

    Hey whitejinho,
    I'd try restoring your Apple TV. If you haven't done that before, the following article has detailed steps on teh process:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Cheers,
    Delgadoh

  • ITunes Match is having errors d/l songs to my iPhone 4s. Then I can't delete them, and it says some songs are playing when they aren't. I've restored my iPhone, same issue.

    iTunes Match is having errors d/l songs to my iPhone 4s. Then I can't delete them, and it says some songs are playing when they aren't. I've restored my iPhone, same issue.

    According to this article  Using iPhone on an airplane  you should be able to listen to music with Airplay Mode enabled.
    Make sure you have Music switched on in Settings > Store or your music won't download via Wi-Fi.

  • HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed?  i never had this problem before.  if i do this will i loose all my files, music, etc?

    When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install.  if i do this will i loose my files and music?

    No, you should not lose anything.

  • It wont let me download itunes, it keeps saying error. How do i fix it?

    it wont let me download itunes, it keeps saying "error". How do i fix it?

    You say "It won't let me download iTunes ...".  I cannot imagine what you mean.  What does "It" mean?
    iTunes is a part of iOS on your iPhone.  If your iPhone can turn on, iTunes is already there.  You cannot separately download iTunes to iPhone; you would have to update iOS to get a fresh copy.

  • Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel.  Help

    am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

    Hi,
    Here is a similar thread for your reference:
    There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
    http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
    Hope this helps
    Vincent Wang
    TechNet Community Support

  • I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I just figured it out. All I had to do was close out of iTunes then restart.

  • I cannot install or uninstall itunes.  I get error message 2324?????

    I cannot install or uninstall itunes.  I get error message 2324?????

    You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link:  http://support.microsoft.com/kb/2438651/

  • I can't update itunes. I get error message can't find "itunes.msi". What can I do?

    What can I do to download updated itunes. I get error message can't locate "itunes.msi." folder.

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • "itunes has experienced an error and needs to close"

    while trying to import my c.d. collection to itunes, i quite often get the message "itunes has experienced an error and needs to close. do you want to send the error to microsoft?" it usually takes me about 20 minutes to import 1 c.d. to itunes becuase i have to keep re-opening itunes after it closes. i never lose anything i have already imported. sometimes i will get through 5 songs before i get the error message, sometimes i cant get through a single song. whats the deal here??

    What if you try importings CDs to your computer (not to iTunes) Is this normally working? If yes the problem is in ITunes and if no the problem is maybe your CD player. If the problem is in iTunes you should try to download the latest version from the Apple pages and then update/reinstall.

  • "iTunes has encountered an error and needs to close" -Gapless Playback

    I've had this problem for a while now and I'm just plain sick of it!
    Every time I start up iTunes it does the "Determining Gapless Playback" thing, but when it gets to certain songs it freezes up and I get an error message that says:
    "iTunes has encountered an error and needs to close"
    This happenes to a lot of songs (a few dozen)and the only way I can actually access my library is by hitting the 'x'next to "Determining Gapless Playback" before it gets to the songs. However, now I can't even do that because it gets to the song immediately.
    I need to know if I can disable the gapless playback or somehow debug this (I have reinstalled iTunes, Quicktime works, I have reloaded my library, done a system restore,and changed users/startup programs... nothing works)
    PLEASE help!
    I run XP if that helps.

    Kar,
    Check out the steps Roy B posted in this thread. They are long and a bit convoluted, but they seem to have done the trick for many others having this problem.

  • "iTunes has encountered an error and needs to close" - can't open iTunes

    Hi guys,
    I'm a huge Apple fan so I obviously decided to upgrade to Apple 7.0.1 the day it came out... installed it. Opened it up, but within just a few seconds i got a Windows message saying
    "iTunes has encountered an error and needs to close"
    I reinstalled it and still have the same problem.
    First few days I could atleast keep iTunes open for a few minutes before the message, but now its down to just a few seconds.
    I run Windows XP if that helps any.
    Please help me fix this problem or tell me how I can put iTunes 6 back on my computer --- I need my music!
    Thanks

    After downloading and installing 7.0.1 my iTunes would not open either. Even worse is you can't go back to v6 if you had v7 running--the database is updated.
    Luckily I was able to get my iTunes to open again by doing the following:
    Click Start/Run
    Type in "%userprofile%\application data\apple computer"
    Right click on the iTunes folder and rename it to iTunes.bak.
    Close the window.
    Click Start/Run again.
    Type in "%userprofile%\local settings\application data\apple computer"
    Right click on the iTunes folder and rename it to iTunes.bak.
    Close the window.
    Try opening your iTunes again. It may re-ask some general setup questions, but mine opened without the error, and it still had all my music. However, I did have to re-authorize my computer.
    I used to never be leary about updating iTunes... guess Apple's software ain't no peach, either.
    Hope this helps someone.
      Windows XP Pro  

  • How do I stop my iTunes from getting an "error and has to close" message?

    When I open iTunes, it wants to update my Music Match and I get an error message that "iTunes has experienced an error and has to close".  How do I prevent this?

    No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
    Regards.

  • When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start".  After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing".  I downloaded MSVCR80.dll.

    When I open iTunes I get an error message "MSVCR80.DLL missing".  I downloaded this .dll and installed in C:\Windows|System32.  I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"

    My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"
    should i uninstall/ reinstal.
    will i loose all my music nd playlists?

    This technique should work...
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

Maybe you are looking for

  • NullPointer exception in request.getParameter().indexof(.....) only in 6.1

    Hi I have one full working application (containing WAR + JAR) files. Right now this application is working absolutely fine in weblogic 6.0 sp1 on WINNT & Solaris. In this application, we accept events to save data from external applications like exce

  • Itunes crashes on start up

    SInce I did the last software upgrade, I cannot open ITUNES and also SKYPE. The softwares crash when trying to open them, I've also tried downloading again both softwares but do not work. Please, advise on solving this problem.

  • Using ocx controls on form6i (Crystal report 7 control)

    I want to call reports developed in crystal report 7.0 (oracle as a backend) I putted a ocx control on form and called now i want to call different reports from different push buttons. vinod

  • Getting Error in BI Answers with Essbase as Data source

    Hi We are on OBIEE version 11.1.1.6.0.I am trying to develop a report in BI answers with Essbase cube as data source, I am getting the below error Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSErro

  • This is the most frustrating site I've been on in ...

    I found a couple of questions on here which had very helpful answers so I wanted to post one myself but have got more and more irritated trying to navigate around this site! Agh!  Can you please make it a little more user friendly?