Itunes 11 and windows 8 burning issues

i installed windows 8 and ever since itunes wont burn or recognize cds. My diagnostics say that the cd driver is not available. I've tried working with upper and lowerfilters. if i add both then my computer doesn't even recognize i have a cd drive at all. i've uninstalled, restarted, reinstalled. i'm at my wits end. anyone got any ideas?

Do you already have installed Windows 8 Media Center? The Media Center contains missing features which are needed by iTunes 11. Details could be found on my blog.

Similar Messages

Itunes for windows - burning issues - 4280 error

I have been able to burn cd's until I updated I-tunes with the 7.0 version. I can import but cannot burn at all. I have updated all my drivers and firmware, uninstalled and installed I-tunes, updated xp pro and windows, changed burn speeds, etc. etc. Sometimes it gives me a 4280 error before beginning the burn, other times it will go through the motions of burning but will only give me a blank cd at the end, and sometimes it will burn something (you can look at the disc and see that something is burned) but it doesn't work in any cd player or cd drive on the computer. Also I am running my computer as an administrator so that is not the problem. I have gone through searches on google and have gone through the forum discussions in I-tunes but have not found a solution. Here is the diagnostics that was run through I-tunes:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Compaq Compaq PC
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: NVIDIA Vanta LT\Vanta/Vanta LT
Found aspi32 running.
IDE\DiskQUANTUMFIREBALLlct15_30_______________A01.0F00, Bus Type ATA, Bus Address [0,0]
SBP2\Maxtor&OneTouch&CmdSetId104D8&GenDisk, Bus Type IEEE 1394
USBSTOR\DiskWDCWD1200BB-00DAA3____75.1, Bus Type USB
IDE\CdRomCOMPAQCD-ROM_LTN403____________________DQ19___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCDRW/DVD_SM-352B________________T809___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: COMPAQ CD-ROM LTN403, Rev DQ19
Drive is empty.
F: SAMSUNG CDRW/DVD SM-352B, Rev T809
Audio CD in drive.
Found 10 songs on CD, playing time 62:46 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 05:57:00
Track 3, start time 13:39:48
Track 4, start time 19:41:14
Track 5, start time 24:45:28
Track 6, start time 29:40:70
Track 7, start time 35:48:27
Track 8, start time 41:24:35
Track 9, start time 48:16:74
Track 10, start time 54:00:09
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32.
The drive CDRW speeds are: 8.
Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive F: SAMSUNG CDRW/DVD SM-352B on CDR media at speed 8X.
I have read somewhere that the problem could possibly be with one of the updates for windows xp but I'm not sure if I believe that. Is there anybody out there that can help me with this?

Well...after spending countless hours trying to update drivers and such...and basically finding out that everything was up to date....whoollaaa! I-tunes comes out with version 7.0.2 yesterday. So...I installed this and now I'm able to burn cd's.

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

Is there a fix for the incompatibility between itunes and Windows Vista?

I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason

I try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?

i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i do

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

ITunes and Windows 8

Using it on a tablet that had Win 7 (and it ran fine). Switched to Windows 8 when RTM came out (tablet certified for Windows 8). When I rented a couple of movies after about 10 minutes of watching the movie would play horribly slow and the sound would cut out. Restarting iTunes fixes it for about another 10 minutes.
Any word on iTunes and Windows 8? Apple has had enought time to test (with the dev and consumer previews being out for several months and RTM was at least a month ago) and deploy a version ready for Windows 8 at launch date.....

revo1059 wrote:
Any word on iTunes and Windows 8? Apple has had enought time to test (with the dev and consumer previews being out for several months and RTM was at least a month ago) and deploy a version ready for Windows 8 at launch date.....
No one here would have any way of knowing as we're users like yourself.

My Ipod 7th gen is not being recognized by itunes and Windows 8.1.

Hello. My ipod 7th gen is not being recognized by itunes and Windows 8.1. When I connect my ipod to my computer, itunes will open automatically and a message bar below will appear:
I have followed all the instruction in the support and itunes still unable to deted my ipod. The funny thing is, if i uninstall itunes, Windows 8.1. will detect my ipod but when itunes is installed, both itunes and windows 8.1. cannot detect my ipod. Thank you in advance for all your help.

the message box says like this:
An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again.

Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel Windows XP 30cm

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

My windows 7 computer will not detect my ipod since updating both itunes and windows. I've tried downloading them again and testing the ipod on a different computer which does detect it.

My Windows 7 laptop won't detect my iPod since the last update of iTunes and Windows. I've tried downloading them again. The apple device manager has an error message.

http://support.apple.com/kb/ts1538

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

Computer says iPod is there, but iTunes and Windows won't recognize it

I've had a 60GB ipod photo for about 4 years and it has served me well. This morning the iPod froze in the middle of a song. I hit reset, and it came back blank - all the files were gone. When I got to work and hooked it up to my computer, iTunes and Windows can't recognize it, but I can find it in device manager - which means I couldn't do restore.
I hit reset a few more times, changed USB ports and, somewhat miraculously, the iPod came back, complete with all files. On the way home from work it happened again and I haven't been so lucky.
I forced it into disk mode and iTunes recognized it, but told me it was corrupt. I also received a computer sound card error - my sound card was busy, and an error stating that audio/video playback could be limited. I tried restore, but I received the unknown error. I'm using the latest version of iTunes and I'm all out of ideas.
Any suggestions or should I put this iPod to rest and save up to buy a new one?
Thanks

The most likely problem is that the hard drive in the iPod is becoming unreliable. It may be experiencing sticktion, which is friction that makes the spinning platter stick and the motor cannot get it spinning. The iPod is regularly spinning the hard drive up, to cache songs into memory, and then spinning it down, to save power. If the drive was not able to spin up when commanded (in the middle of a song), the iPod would seem to lock up. Later, bumping the iPod may make the hard drive spin again, so it seems to work again, at least for a while.
If this the the problem, the only way to fix it would be to replace the hard drive inside.
You might try reformatting the iPod using Windows, if you can get it to appear in a My Computer or Windows Explorer window. Use a full format instead of a quick format. If that process competes successfully, run iTunes and try using Restore again to install and initialize the iPod's software.
If formatting does not compete successfully, it may be time for that new iPod.
You can do some experimenting on the old iPod, if you're into such things. I have successfully installed a compact flash card (through an adapter), inside a 4th gen iPod as a replacement for the hard drive. It is only 4GB at the moment, but CF cards up to 16GB are getting relatively cheap, so I might get one of those and start using by old broken 4G iPod again, +now with shock-resistant energy-saving flash-based storage+.

Ipod not appearing on itunes and windows

ipod not appearing on itunes and windows i have tried reinstalling itunes and nothing works

Hello there. Maybe this support article will assist you.
http://support.apple.com/kb/ts1538
Cheers

My iphone 4s doesnt want to get recognized in itunes and windows 7

my iphone 4s doesnt want to get recognized in itunes and windows 7 and idk what to do

can u please help if u know what to do

Ipod freezes itunes and windows explorer

I have been trying to connect a new 30G Ipod to my Vista computer and everytime I do both Itunes and Windows Explorer freeze. Neither recognize my ipod. I tried to change the drive designation but couldn't because of Explorer freezing. I did run the same Ipod on my XP and everything worked fine so it is a problem with my Vista computer or with the ITunes (7.2.035) software. Any ideas?

Disconnect the printer, use a rear port on your computer and try it again.

Downloaded latest Itunes and Windows Update and everything fell apart

Okay, I dl'd the latest Itunes and Windows Update today and turned off my computer. When I came back and turned it on, it became really slow and the style for all the "windows headings" turned "gray classic theme." I tried running Itunes and a box comes up saying that I "Do not have access to change the Catalyst Control," my ATI driver I think (x1300). Then it says that I can't run Itunes because the audio is configured wrong. I go to my Audio settings in the "control panel" and everything is grayed out except the hardware choices. I clicked on their properties (SigmaTel Audio), but nothing would come up for 45 minutes. I am barely running in VGA mode and cannot access the internet connections in IE, thus barring me from Microsoft's updates. Sorry if it's hard to understand, but I'm ****** because I can't listen to all the new stuff I bought on Itunes yesterday Does anyone have any clues or ideas?

Take a look at this link, http://support.apple.com/kb/TS1369

Itunes 11 and windows 8 burning issues

Similar Messages

Maybe you are looking for