ITunes 11 playback preferences problem

Hello,
I have a Macbook pro 13 inch with ratina display runing OS X version 10.9.1
Ihave iTunes version 11.1.4 and I found out about something straing about my iTunes.
Usually, the playback preferences looks like that... (ignor the red square)
But my playback preferences look like this...
I really need the option to edit the subtitles because it really small and I find it very difficult to see.
I'll be really pleasured if someone could help me with it
Thanks

Hello there, Ofir Stiber.
The following Knowledge Base article reviews where the caption settings are in OS X Mavericks:
OS X: Using captioning features in Mavericks
http://support.apple.com/kb/HT5910
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Playback preferences are not working with 10.5. solution?

    I downloaded iTunes 10.5 and my playback preferences are not working. For example, crossfade is screwy. Sometimes it will fade out at the end of a song, but the next song will not come in until the end, or the next song will come in WAY too early. Sound enhancement is also doing nothing. These all worked fine before the update. Has anyone else encountered this?

    I too am having problems with crossfade since installing iTunes 10.5 where mostly it is just fading the end of the song.. when set to a 6 second crossfade it is just fading the last 20 seconds and still waiting till the song ends before starting the new song & i've also noted that sometimes a new song will begin when there is in excess of 20 seconds left of the previous song remianing.. hence, it sounds rediculous. i've tried uninstalling & re-installing but no fix. please help anyone..

  • Any fix for terrible iTunes playback?

    I have several mp3s in my iTunes collection which I recently downloaded from iTunes Music Store and they sounded terrible. Bass was very distorted and treble wasn't that good either. I was of course playing them with iTunes playback. I played these songs through the Mac, my earphones and my sound system and it was the same in each case. I assumed right away that the tunes were just bad recordings and in fact I wrote a review praising the album for its music, but noting that the sound quality was often very poor.
    Now, reviewing the threads at this forum, I find that others are having the same problem with iTunes playback on mp3s. As other users found, I tried playing the same songs through Quicktime and they sounded okay. Distortion was gone. Something is seriously wrong here. I'm not talking about a minor flaw that only audiophiles can hear, I'm talking about gross distortion. Users who posted here thought they might have blown a speaker, the sound was that bad.
    I will, of course, make a bug report. But meanwhile is there any way to tweak iTunes to get better sound? I can't find any adjustments for iTunes playback at all, but maybe there's away. Thanx

    I was able to go a long way to solving my problem by going to Preferences -> Playback, and dragging the setting on "Sound Enhancer" way to the left and un-checking "Sound Check." These features (whatever they are) seem to have been clipping the output sound like running it through a limiter.
    Rant: By the way, "Sound Enhancer" and "Sound Check" convey no information. What is "Sound Enhancer" anyway? There is technical language to describe what they do but Apple seems to refuse to use it. It's like the saturation adjustment on my old TV, just called "Picture." How is anybody supposed to know what "Picture" means? "Sound Check" says it "automatically adjusts song playback volume to the same level." Same level as what? I suppose that means that the volume of song A which is loud is adjusted to match song B which is soft. But obviously the outcome is clipping. How can this be achieved without limiting dynamic range? /Rant
    Don't know if this fix will work for other users who complain of distortion in playback. Obviously there are users who like Heavy Metal and in that case music and distortion are the same thing.

  • ITunes playback corrupted after FW 800 drive attached

    I suspect this problem is more of a hardware issue than a software issue. But let me describe the problem.
    I use iTunes to play mp3 recordings from my Mac Pro desktop with the output through a FW audio device (M-Audio Profire 610). Everything works fine until I attach an external My Passport hard drive connected via FW 800 cable to the computer.   As soon as this drive is connected there is immediate static and disruption of the itune playback that gets progressively worse until there is nothing but noise.  Disconnecting the external hard drive does not remedy the situation.  Neither does restarting iTunes.
    The only way to fix the problem is to restart the computer.
    Does anyone have any ideas what is happening?  The computer is offsite.  But when I have time to do some troubleshooting I will try connecting the hard drive with a different FW 800 cable or try connecting with its usb connector.  I will also try a different FW 800 device to see if the problem is repeated with a different drive.
    John
    Edit:  Additional information.  When I attach this firewire drive to my home computer running iTunes this problem does not occur.  It is only with the offsite problematic computer. However, I am not using a FW audio output device on my home computer.
    John
    Message was edited by: John Baughman

    If Aperature is working okay, then there may be no need to reinstall it.
    I doubt reinstalling it (or anything else) will delete any preferences. Maybe sone obscure 3rd party apps will write over prefs when reinstalling but I have never heard of any Apple applications deleting prefs when reinstalling.
    Reinstalling iTunes will not affect anything. All preferences will be as they were.

  • IPhone headset no more able to control iTunes playback on MacBook Pro

    After I have updated to Mac OS X 10.6.5 and iTunes 10.1 on the latest 13" MacBook Pro, it's not possible to control the iTunes via iPhone headset anymore. Only the volume keys work but the middle key (which can be used for play, pause, next, previous, fast forward) stopped working. I've been looking for any possible settings to activate that in iTunes but I can't see any. Can anyone else confirm that? And could you suggest a solution? I was really used to controlling iTunes playback the same way I am controlling it on the iPhone and I thought it was really cool that Apple has allowed such consistency and interoperability between products. I hope that's a bug and not a decision.

    There is another thread about this problem:
    http://discussions.apple.com/message.jspa?messageID=12605653#12605653

  • ITunes will not open in Windows 7 for one User. All I get is the Licence Agreement pane and when I click YES nothing further happens. I have set up a second user and iTunes opens without problem in that User window.

    Clearly something is blocking the main user(administrator) from opening the iTunes programme and I cannot find a solution.

    Many thanks for your reply. Yes I carried out the suggested procedure in safe mode , which did not resolve the issue and so this is what led me to set up a second User account. iTunes opened without problem in this second account and so I looked at the User-specific troubleshooting but I just could not locate the iTunes Preference files no matter how much searching I did.
    I also tried uninstalling and re-installing but the problem persists. Would be very grateful for any further advice.
    ollie66     Gorran Haven, Cornwall, England.

  • Itunes playback has no sound

    Hi, it seems that since I have moved onto itunes version 8 I can no longer use the playback for movies or music! I select a title and it appears in the itunes playback window but the diamond indicator does not move and nothing can be heard! I'm using Windows Vista and have checked my sound playback on things and all seems ok. Anyone got any idea?
    Cheers.

    Hi. I had the same problem, and after an afternoon of digging and changing configurations I figured it out for my own computer - hope it works for you. Go to control panel > programs > default programs > set program access and computer defaults. You can then choose between 3 configurations: windows, non-windows, and custom. Choose custom, and under default media player, disable access to windows media player and windows media center, and choose itunes as your default. Hope it works!!

  • Backup device file not appearing in iTunes Device Preferences

    While performing 1st time backup for my iPad to iTunes MacBook, the process was interrupted halfway through. As such, I deleted the registered backup file from iTunes Devices Preferences/device/device backup and attempted to reinitiate the backup process. I have to restart MacBook because the iTunes File/Devices turns grey and I am not able to click on it. Restarting gets me to inititiate the back up and transfer purchase. The problem now the device name is not appearing at iTunes Devices Preferences/device/device backup. I am not sure if the backup is successful/complete and if so where is the files? How do I make the file appear so I can transfer the data / apps to my new ipad air via iTunes. Pls help...

    Device not detected in iTunes for Windows

  • Poor iTunes playback on HP MIni 110-1125NR

    Has anyone found a solution to the playback problems using iTunes on a the HP Mini netbooks?
    I've gone to both HP and Microsoft downloading any and all plug-ins/updates that relate to audio/video playback/acceleration. I continue to get lag, stuttering, and pausing when I listen to music or watch tv/movies downloaded from iTunes. Interestingly, music burned from a CD seems to playback without problem.
    Thanks

    Hi @von26 ,
    Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • Exporting at HIGHEST quality - iTunes IMPORTING preferences?

    Does the iTUNES IMPORTING preferences matter? I am exporting UNcompressed so I can give songs to a Master Engineer. What should my itune settings be at?
    or should i share another way?
    Thank you!

    Scott Magri wrote:
    Does the iTUNES IMPORTING preferences matter? I am exporting UNcompressed so I can give songs to a Master Engineer. What should my itune settings be at?
    or should i share another way?
    Yes - If you're delivering a mix to a mastering engineer, do not share to iTunes! Export to Disk instead.
    Generally, when you deliver something to a mastering engineer, you want it to be as unprocessed as possible. iTunes is a fantastic consumer-oriented playback application. But for sending audio in and out of iTunes on its way to a mastering engineer, it’s Hogwarts - full of mysterious nooks and crannies that could inadvertently transform your audio without you realizing it. Plus, it's completely unnecessary and avoidable.
    So to take steps to ensure the highest (and most unadulterated) quality possible, first turn off auto normalize in GB’s advanced preferences, if you haven't already done so.
    Then, if you've chosen any presets for your Master Track, remove them (adding these kind of finalizing effects is exactly what the mastering engineer does; the presets in Garageband are a quick and easy alternative, but you have the real thing).
    Finally, under the Share Menu, choose Export Song to Disk. And, of course, don't compress.

  • ITunes Shopping Cart Problem

    Hello,
    I have the strangest issue with my shopping cart. I had some items that I was going to purchase but decided not too and left them in my cart. I went to remove them from my cart the other day and I can't! I recieve the following error when I clice the x next to each item:
    Could not remove an item from your cart. An Unknown error occurred (1011).
    There was an error in the iTunes Store. Please try again later.
    I did try again later, many times, to no avail. The items that are in my cart are no longer available in the iTunes store which I'm positive is contributing to the problem. Any help that someone could give would be appreciated!
    Thanks again.
    Dell   Windows XP Pro  

    This is a bit of a long shot, but it worked for another user, so it's worth a try. Go to the iTunes Store preferences, select "Buy and Download Using 1-Click", close the preferences window, reopen the preferences window and reselect "Buy and Download Using Shopping Cart". Then see if your Shopping Cart will clear.
    If that doesn't help, you'll need to contact the iTunes Music Store customer support department through the form at the bottom of this web page and explain the problem to them.
    Hope this helps.

  • TS3212 Every time I connect my iPhone 4 to my computer to sync, iTunes stops responding.  I have removed and redownloaded iTunes and the problem continues.

    Every time I connect my iPhone 4 to my computer to sync, iTunes stops responding.  I need to shut it down and restsrt to access iTunes.  I have removed and redownloaded iTunes and the problem continues.

    Try disconnect your computer from the internet and see if you can open iTunes and connect your device without crash.
    if iTunes does open without crash, go to iTunes Menu Edit > Preferences, "Advanced" tab and click the "Reset Cache" button, OK.
    Close your iTunes.
    Now, use Windows Explorer to delete the contents of Music\iTunes\iTunes Media\Download
    You may now re-connect your internet then see if you can open iTunes and connect your device without issues.

  • Itunes playback performance issue

    All my iTunes library files are kept on the Airport extreme and so every time I play a movie, it skips, stutters, loses sound here and there, it's getting quite annoying. I noticed that if a movie is projected to the big screen using apple TV, it will buffer like a youtube video and plays absolutely fine. Also, if I go directly to the folder and right-click on the file, play with VLC, there is no problem. It would appear to me that the problem is with iTunes' playback of videos on my Airport Extreme.
    Does anybody have the same problem and is there a solution?

    I can only offer you a sympathetic shoulder to cry on.
    I'm not using an air disk. I'm using a hard drive on an old G3 that I use to serve my music library to my laptop as a wander throughout the house. I have it set up this way because I also have the G3 hooked up to a stereo system that can pump music to various locations of the house. So both machines need access to the library, as well as the playlists, rating histories, playback counts, etc., so that my smart playlists can have the same data to work from.
    Anyway, I'm having this same issue. Both computers are constantly wanting to scan for gapless playback. I've let them both finish scanning my entire library numerous times, but it doesn't help, they want to scan it again and again, every time I launch iTunes. If I cancel the process, it will likely try to start again a few minutes later.
    This only happened after I installed iTunes 9. I'm ripping my hair out over this issue. Give me back the music library that I know and love please.

  • Lag in iTunes Playback via ATV

    I recently noticed a serious lag in my iTunes playback over my ATV.  I can see the library and the playlists, but when I select music, I get the spinning wheel for various lengths of time until it finally loads.  Playback may or may not be consistent after loading.  I may listen to part of one song, or it may go for three hours, no consistency there.
    Nothing else is affected on the network.  All other iOS devices connected to WiFi have strong connections.  Computer and ATV are on the same network, no firewalls.  I am running a 2008 MBP on 10.9.2 with iTunes and ATV both on most recent SW versions.  Modem and router are both Netgear, and have been reset.
    Any thoughts?

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    -Griff W.

  • I bought a song on ITUNES and had problems downloading it. I got in touch with support and and they downloaded the song to my account but now when I try to play it, it tells me my computer isn't authorized to . Reauthorizing computer doesn't work. HELP

    I bought a song in ITUNES and had problem downloading it. I contacted support and they downloaded the song for me. Now when I try to play the song, I get a message saying my computer isn't authorized to play it. I try reauthorizing but that doesn't work, just keep getting the same message. Can anyone help?

    Hello
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Best of luck,
    Mario

Maybe you are looking for

  • Issues with Macbook Pro display.

    Hi. Recently, I haven't been having too much luck with Apple products. It started with my Macbook pro Core 2 duo 2.16. It had screen issues, leading to the screen being replaced (replacement screen contained several dead pixels), alongside a logic bo

  • Itunes wont load and i'm getting a conflict with my PC it has knocked my dvdrw out

    hi i have bought a new pc with windows 7 on it 64bit version and i tried to connet my ipods and install itunes i keep getting there is a confilcting issuse with itunes and windows 7 so it will not let me install it if i do it knocks my dvdrw out and

  • XY-Graph, draw Measured value with Timepstamp (e.g. - 2,34; 12:31:12)

    Hi there, I have a proble to draw a XY plot. How is it possible to set the X-axis with the recorder timestamp ? pls see the attachmend! Thank you! Attachments: Test.vi ‏22 KB

  • RWD uPerform - attaching Cue cards or pdf to an eLearning course

    I am responsible for providinng eLearning for a SAP implementation,  using the RWD Uperform tool also known as SAP Productivity Pak. We have created Simulations with autoplayback, cue cards and quick reference guide. We have then created a course and

  • Phoroshop Always Crashes after Liquify Filter

    Hello, I use Photoshop CC 14.2.1 (x64) for windows. I have Intel Core i7, 8 GB RAM with 2 GB NVIDIA graphic card (GT 630M). I usually get a lot of body slimming requests from my clients and I use Liquify filter a lot. But after using Photoshop CC, wh