ITunes 12.0.1.26 does not recognize my mobile devices.
iTunes 12.0.1.26 does not recognize my mobile devices.
Hello,
I have the same experience with my iPod Classic under 12.0.1.26 under Max OS X Yosemite 10.10.2. But on another Mac with OS X 10.7.5 and iTunes 12.0.1.26 it is recognized.
Regards
mhomscheidt
Similar Messages
-
I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except the last Library on my computers will make Virtual DJ recognize it. I tried renameing the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around in there. Any help would be appreciated.
Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.
-
My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
ITunes 10.5.0.142 does not recognize my iPhone 3GS
My PC is running Windows 7 Professional, 32-bit OS. My iTunes and iPhone syncing has been flaky since I began using this machine in July, 2011 but was working. However, now iTunes does not recognize my iPhone at all. Previously I was able to force a sync by opening iTunes and then plugging in the phone, but now that is no longer working. The iPhone is recognized by the computer as it does charge, I can see it as a device in Window's Explorer and it asks what I would like to do with the photos / videos.
Here is the latest info on what is installed for each device:
- iTunes: 10.5.0.142
- iPhone: OS 5.0.1, Firmware 05.16.05
Any help would be greatly appreciated. Feel free to ask further questions as I'm not exactly sure what other information to provide at the present time; I'm pretty much at a loss right now.
Thanks!
JohnI am having the same problem. I have a 16Gb iPhone 3GS ios v 4.2.1 with iTunes v 10.5, yet when I connect the phone it tells me there are no updates available. I have 2 iPads, an iMac and a Macbook pro - all of which have upgraded successfully. I thought ios5 was available for the 3GS iPhone. Anyone got any ideas?
-
Itunes does not recognize my iphone device
When plugged into the new itunes V 11. my iphone 4 does not register. I remember this happening when I first logged into mountain lion and I believe it has something to do with AppleMobileDevice. I have tried so many things to rectify this.
I just want to sync to my computer and update my playlists!!!!!
Please helpMountain Lion do not use Apple Mobile Device Service.
iOS: Device not recognized in iTunes for Mac OS X -
MBP Does Not Recognize External USB Devices
MBP does not "see" external USB devices (such as Garmin Nuvi GPS) or any thumb drive. No external USB devices show up in Finder nor does Disk Utility see them. No cable issues. Have tried restarting several times, but to no avail. This MBP used to recognize these USB devices, but no longer do so.
I have seen this question posed several times in forum, but no suitable answer. Don't know if it is H/W or S/W problem.Hi Terry Temple
Is there at least any power going to the USB ports? ( as in if for example you plug in a USB light, will it switch on? )
If there is power in the USB ports it might be a software problem.
Try resetting the SMC see link: http://support.apple.com/kb/HT1411
also try re-set the PRAM see link: http://support.apple.com/kb/HT1379
However if you do not have any power at all it probably is a hardware problem.
Is it still under warranty?
Regards,
Andrew
Message was edited by: iddrew -
ITune 9.1.1 (12) does not recognize iPod Touch
I tried to add new music onto my iPod touch today, and found that iTunes did not recognize my iPod. I even used three different USB cords to connect. I cannot update to a new version of iTunes because my OS is so old (I am waiting for the summer 2011 release of Lion).
My iPod turns on when it is plugged in to my computer, but does not charge or initiate iTunes to open. It worked fine one month ago! What can I do to resolve this?It says 9.1.1(11) -- and the update check says it's there are no updates for me.
Looking through the drivers that are associated with the iPod, I get:
\system32\drivers\WpdMtpDr.dll
\system32\drivers\WpdUSB.dll
\system32\drivers\WUDFRd.sys
\system32\WpdConns.dll
\system32\WpdMtp.dll
\system32\WpdMtpUS.dll
No USBaApl.sys at all.
An attempt to auto-update the driver and by manually pointing to the \system32\drivers\ directory yields:
Best driver already installed -- Digital Still Camera
Without an .inf file to easily associate to the iPod, it's hard to choose which of the device drivers to force the usbaaple.sys to the iPod -- I can't choose .sys files, only .infs.
Of the device types:
(Standard MTP-Compliant Device)
--Kodak DC4800 Zoom Digital Camera
--Kodak DC4800 Zoom Digital Camera
--Kodak Digital Camera
--Kodak Digital Camera
--MTP Device Version: 6.0.6000.16386 [6/21/2006]
--MTP Device Version: 6.0.6000.18000 [6/21/2006]
(Standard MTP-compliant devices)
--Digital Still Camera *What Vista thinks the iPod is
--Digital Still Camera
--MTP Device
--MTP Device
--MTP IP Device
--MTP IP Device
(Standard Windows Mobile device)
--Windows Mobile device
(WPD file system device)
--Microsoft WPD FileSystem Volume Driver
Outside of the Kodak drivers, I've no idea which one would be best suited for the iPod, and I suspect none of them will work. I should note, the iTunes did recognize the iPod at some point. Thankfully, I only sync'ed to the iPod instead of maintaining a portion of my library on the iPod Touch (I lost some tracks on an iPod Mini when slipped off the jack and hit the ground, crashing the hard drive); I don't have any photos or videos on it. -
My computer and itunes all of a sudden does not recognize my iphone
my itunes and computer all of a sudden will not recognize my iphone....i connect them with my cable and it says my apple mobile device service is not set up ....but i just used it not that long ago...i don't know what has changed or how to fix it
http://support.apple.com/kb/TS1538
-
ITunes 9.0.3.15 does not recognize iPhone 3G on Win 7
Used to work on Win 7 and previous version of iTunes. Request assistance. Below is the diagnostics report. If anyone has a solution please write to me
Microsoft Windows 7 Business Edition (Build 7600)
Hewlett-Packard HP ProBook 4410s
iTunes 9.0.3.15
QuickTime 7.6.5
FairPlay 1.6.16
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number F4B54E*AC1
Current user is not an administrator.
The current local date and time is 2010-03-13 00:34:16.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {C740B8D9-8378-4526-B608-E191DFF3D8C5}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 05:30:00 1970
Lease Expires: Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name: {38018372-176C-456C-A584-5EB099FD63EE}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 05:30:00 1970
Lease Expires: Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name: {23E00979-0351-4F81-9616-657ED064D79E}
Description: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 05:30:00 1970
Lease Expires: Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name: {33005242-B26D-4D2D-8E3F-DA859A7E026C}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Mar 13 00:23:47 2010
Lease Expires: Sat Mar 13 01:23:47 2010
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-03-13 00:33:46.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.3.15 is currently running.
iTunesHelper 9.0.3.15 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
iPhone 3G running firmware version 3.1.2
Serial Number: 84831*Y7H
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
<Edited by Host>Hmmmm. If you're up to date on your *Essential System Updates for Microsoft Windows 7* downloads from HP, you might already have the hotfix from the following Microsoft document. (It's included in version 1.1.) But just in case, I think it's probably worth applying:
[USB devices that are connected to a computer may not work after the computer is idle for more than one hour Windows 7 or in Windows Server 2008 R2|http://support.microsoft.com/kb/978258] -
MenuManager in TableViewer does not work on mobile device (tablet with Win 8)
Hi
Welcome everybody This is my first post on this forum. I really hope you can help me out with this. It is kind of strange.... Ok, so I am developing RCP/SWT application, and it has to work on mobile device with windows 8 as well (10' tablet with windows Cool. So far so good - everything work pretty nice, except one thing that is really annoying. So I have this table, and user has possibility to use right click menu (context menu) on each row. Problem is that it does not work at all on mobile device. Right click on tablet is actually defined by pressing finger for longer period of time - then after 1 or 2 second menu should appear. Problem is that it does not at all. Funny thing is that when I connect a mouse using USB port to tablet I am able to open this menu Smile - it works completely fine. Menu works also with finger action when I press on empty (e.g. table without any data) I noticed that this issue is related with constructor style option SWT.FULL_FULL_SELECTION that is used for creating table. When I remove it from the constructor, right click works fine but there is not any data (no record is selected), so I can not perform any context menu action. Menu is dynamic, so depending on what data is loaded, the contain of menu changes. Main problem is that method menuAboutToShow is not called at all!. The code looks like that:
Table table = new Table(parent, SWT.FULL_SELECTION | SWT.VIRTUAL | SWT.H_SCROLL | SWT.V_SCROLL | SWT.MULTI);
table.setLinesVisible(true);
table.setLayout(myTableLayout);
createColumns(table, layout);
table.setHeaderVisible(true);
tableViewer = new TableViewer(table);
tableViewer.setContentProvider(myContentProvider);
tableViewer.setLabelProvider(myLabelProvider);
MenuManager contextMenu = new MenuManager();
contextMenu.setRemoveAllWhenShown(true);
contextMenu.addMenuListener(new IMenuListener() {
public void menuAboutToShow(IMenuManager mgr) {
contextMenu.add(new MyAction(action)); // THIS PLACE IS NEVER CALLED WITH RIGHT FINGER CLICK!
// dynamic filling context menu engine
Menu menu = contextMenu.createContextMenu(tableViewer.getControl());
tableViewer.getControl().setMenu(menu);
getSite().registerContextMenu(contextMenu, null);
Additional info: this tap-hold functionally is standard equivalent for right click on tablet device with Windows. I did not do any additional implementation for that. I think it should just work. I have several tables in my application and in all of those this problem appears. Any idea what may be wrong ?
cheers,
PawelI have just installed SWT Example on my tablet (from here: https://www.eclipse.org/swt/examples.php#standaloneOutsideEclipse) and this same problem appears on the table example. I think it is general problem/bug. Should I report this as a swt eclipse bug ?
-
MenuManager in TableViewer does not work on mobile device
Hi
Welcome everybody This is my first post on this forum. I really hope you can help me out with this. It is kind of strange.... Ok, so I am developing RCP application, and it has to work on mobile device with windows 8 as well (10' tablet with windows . So far so good - everything work pretty nice, except one thing that is really annoying. So I have this table, and user has possibility to use right click menu (context menu) on each row. Problem is that it does not work at all on mobile device. Right click on tablet is actually defined by pressing finger for longer period of time - then after 1 or 2 second menu should appear. Problem is that it does not at all. Funny thing is that when I connect a mouse using USB port to tablet I am able to open this menu - it works completely fine. Menu works also with finger action when I press on empty (e.g. table without any data) I noticed that this issue is related with constructor style option SWT.FULL_FULL_SELECTION that is used for creating table. When I remove it from the constructor, right click works fine but there is not any data (no record is selected), so I can not perform any context menu action. Menu is dynamic, so depending on what data is loaded, the contain of menu changes. Main problem is that method menuAboutToShow is not called at all!. The code looks like that:
Table table = new Table(parent, SWT.FULL_SELECTION | SWT.VIRTUAL | SWT.H_SCROLL | SWT.V_SCROLL | SWT.MULTI);
table.setLinesVisible(true);
table.setLayout(myTableLayout);
createColumns(table, layout);
table.setHeaderVisible(true);
tableViewer = new TableViewer(table);
tableViewer.setContentProvider(myContentProvider);
tableViewer.setLabelProvider(myLabelProvider);
MenuManager contextMenu = new MenuManager();
contextMenu.setRemoveAllWhenShown(true);
contextMenu.addMenuListener(new IMenuListener() {
public void menuAboutToShow(IMenuManager mgr) {
contextMenu.add(new MyAction(action)); // THIS PLACE IS NEVER CALLED WITH RIGHT FINGER CLICK!
// dynamic filling context menu engine
Menu menu = contextMenu.createContextMenu(tableViewer.getControl());
tableViewer.getControl().setMenu(menu);
getSite().registerContextMenu(contextMenu, null);
Any idea what may be wrong ?
cheers,
PawelHi
The "tap-and-hold" is not my functionality. It default SWT Table behaviour on tablet. In windows it self it works like that - to use "right click" you have to do "tap-and-hold". It is just the way it works on tablet I do not have any other application to test it, but I have several tables/tableViever in my application for presenting different results/data, and in all of those this problem appears -
OA Framework page (custom) does not shrink to mobile device screen size.
Hi,
OA Framework page (custom page) using IE6 had application disconnection problem.
So using IE6.1 beta/IE6.5 for OA Framework page (custom page) does not shrink/fit to the mobile device screen size. Means user have to scroll to the right/bottom every time. IE is set as a Mobile device (and not the desktop).
We have tried using following Meta Tag (with different content values) to inform the browser that this is a mobile device. But this has not worked.
pageContext.putMetaTag("MOBILEOPTIMIZED","<META name=\"MobileOptimized\" content=\"176\">");
How we can fix this issue?
Thanks in advance.
NileshHi,
What you are trying to do, I could not understand.
Apps Schema has all synonyms for almost all the objects in other schema if you will not specify any schema name the it will synonyms created in apps. For not using mention like this shema_name.object_name then it will fetch data from mentioned schema.
Regards,
Reetesh Sharma -
After upgeading to iTunes 10.7 on my PC with W7 x64 and IOS 6 on my iPhone 4s, I cannot backup. It says sesson cannot be started. Also cannot recognize apps on iPhone. Further, with WiFi and powered on, the device apperas briefly in iTunes then disappears. Same for iTouch and iPad with IOS 5. How do I resove this? More importantly, how does Apple resolve it? Thanks. . JAD.
AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here. -
ITunes 7.3.1.3 does not recognize iPhone
I just installed the iTunes update 7.3.1.3 and when I attach the data cable to my iPhone, nothing happens. No Icon no iPhone menu, nothing. When I plug the cable into my nano, an icon immediately appears on the left of the screen and allows me to work as usual. Plug it into the iPhone and nothing. Anyone else?? HELP!
i am having the same issue.
i just got my iphone and synced it on my desktop to start, but my macbook won't recognize it.
i have tried reinstalling itunes 7.3, resetting my iphone, and rebooting my computer.
any ideas????
D: -
i updated the os on the ipod as well
Hi there bowlerinager75,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting suggestions that’ll resolve most issues like the one you described, where your iOS devices are no longer recognized by iTunes on your PC.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Cheers,
-Jason
Maybe you are looking for
-
My FaceTime camera don't working what can I do guys ??\
I have that problem with my face time camera and photo Booth what can I do ? file://localhost/Users/RamonPerez/Desktop/Screen%20Shot%202013-04-21%20at%205.48 .36%20PM.png
-
I just bought a macbook pro 13'' non retina display. (I am using it now) so far it has been very good. It is smooth and quick but I am worried about the heat. I have it in a very airated area and it is sitting on a desk. I downloaded istat as a widge
-
Vi find resource can't see 1394 camera
use "visa find resource", can't see my fireware camera, only can see serial ASRL*, but on Max, I can see it, the same thing in CVI viFindResource, with setting /?*, /FIREWIRE?*, only can see ASRL.
-
I tried customer support and got "not my job"
-
Hey, Can anybody tell me something about the OWB wrapper package WB_RT_API_EXEC . I want to know everything about this package and also if we can change tihs package for our application. Your response is valuable Thanks in advance!!!!