ITunes 12.1.1.4 64 bit issues

I have numerous issues with iTunes.
1. When I transfer music to my phone (iPhone 6) the cover art is totally wrong, even though it is correct in iTunes. This really messes with my OCD urges to keep my music totally organised!!
2. Whenever I move music, delete music or generally try to do anything with my phone (connected via a cable) I always get 'cannot sync iPhone an unknown error occurred' (or something along those lines) BUT it usually does the action I want (not all the time though).
3. Am I the only one who finds it incredibly frustrating that when I am flicking from the content on my phone to my library and back again, it ALWAYS goes back to the start? Why can it not be where I left it before I flicked back to the other? A total pain in the *** if you ask me!
Any suggestions to fix these problems greatly appreciated. Thank you!

And I've just learned the forums sensor your language lol. A pain in the *** haha

Similar Messages

  • Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall

    After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success.  After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
    At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes.  When I try to launch iTunes, I get the following error messages:
    "iTunes.exe - Entry Point Not Found
    The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
    When I click OK, I then get:
    "iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)"
    (As I stated above, reinstalling hasn't worked!)
    In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them.  I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music.  Any help would be greatly appreciated!  Thank you

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • I cannot install itunes in vista home premium 32 bit

    i cnoot install itunes 10.4 in vista 32 bit. pl guide

    See Troubleshooting issues with iTunes for Windows updates.
    For downloading issues see the further information area and use a different browser and/or the direct links.
    tt2

  • ITunes 11.2 for Windows (64-bit) hangs when opened

    Hi
    I recently updated to iTunes 11.2 for Windows (64-bit) on both my PC & laptop which both run Windows 7 and are apart from this problem with Itunes are very stable.
    After installing the updates, each time I try to launch Itunes the program will open to show the main window but then I get the following:
    I cannot make any of the functions respond (via mouse or tabbing)
    The "timer circle" (Same as Apples "egg timer I guess) just runs & runs.
    Eventually after say 20 mins, I get the standard Windows message about Itunes has stopped.
    I then have to exit via this message window, whcih closes the Itunes program down.
    I cannot find any conflicts with spyware etc and all other programs etc are running as normal, any ideas if this is a bug in iTunes 11.2 for Windows (64-bit)? Or is there something else I can try?
    I have tried completely uninstalling & reinstalling the software, but that failed too (and I do not know whow to find a previous release of Itunes to try again!)
    Thanks in advance for your assistance.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • CAN'T INSTALL ITUNES 9 ON WINDOWS VISTA 64-BIT OS

    Hey guys!
    I'm having a reaaaallly hard time installing iTunes on my Windows Vista 64-bit OS. Everytime I think it's about to finish installing, it shows me this message:
    What does it mean?? Can someone PLEASE help me, I haven't had music on my iPhone for 4 weeks now!

    Curses ... you did everything right by providing the screenshot, thanks. But we really need to see the error message number that shows up after the "HRESULT" bit for one of those, and it's deciding not show us that.
    Okay ... people who get these error messages for iTunes installs typically are also getting Windows updates failures too. So we'll try to work out what the iTunes/Updates issue is by checking your Update history.
    Go into your Windows Update and click "Update History". Have updates been failing for you recently? If so, doubleclick on each failure to bring up a small window showing some info about the failure.
    What error message codes are you getting for the Windows Updates failures? (For example, 0x8007000B, or something else?)

  • Completely unable to use iTunes in Windows 7 ultimate 32-bit

    hello, i have a grave situation here:
    i've installed iTunes on my laptop HP 6735b running under microsoft Windows 7 ultimate 32-bit
    after trying to use program nothing happens in reliability monitor i get "program stopped" next to iTunes and quicktime i personally think the issue is strictly related to quicktime as the same issue appears to affect it as well clean re-install does no good, compatibility mode also does not solves the issue
    i've followed all guidelines from http://www.apple.com/support/itunes/ -no effect
    microsoft remains extremely unhelpful
    i am really desperate -please advise

    Hey gigipramod,
    Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Installed iTunes 11.0.4.4 64-bit but window 8 pro 64-bit in task manager reports that iTunes is 32-bit.  Why?  Not running in compatibility mode.  Uninstalled and reinstalled.  Same result.

    Installed iTunes 11.0.4.4 64-bit version.  Now windows 8 pro 64-bit reports iTunes as 32-bit in task manager.  Why?  Both my computer and operating system are 64-bit.  ITunes is not running in compatibility mode.  All my music files are MP3.  I uninstalled iTunes and downloaded iTunes64setup.exe from apple and still having the same result.  This was a clean install by-the-way.

    Hello irie00,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • How do i know if my itunes is compatible with windows 64 bit?

    How do i know if my itunes is compatible with windows 64 bit?

    Did you download the 64-bit installer?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • HT2292 I'm receiving an error message when installing iTunes on a Windows 7 64-bit setup.

    I saved the executable and selected to run as administrator but still received an error. The HRESULT is 0x80070BC9.

    Are you using the 32 or 64 bit version? There are two versions of iTunes. One is for 64 bit processor architecture, one is for 32 bit processor architecture.
    Please download the 64 bit version and test it! In my view you try to install the 32 bit version.
    Kind regards!
    Philipp
    EDIT: I am sure you currently try to install the 32 bit version! It doesn't work on a 64 bit system. Are you sure that you use Windows with 64 bit?

  • New iTunes still not working with 64 bit operating systems?

    When will iTunes support advanced 64 bit operating systems...
    Would seem that a next generation phone would work with the next generation of operating systems...

    iTunes does work with vista 64 bit. I can sync my iPod with it. It's the 'Apple Mobile Device Support' portion that is required by the iPhone that isn't working.

  • I am using ITUNES 11 on Win 7 64 bit.  I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working".  How do I trouble shoot or fix this? Thanks

    I am using ITUNES 11 on Win 7 64 bit.  I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working".  How do I trouble shoot or fix this? Thanks

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • Install ITunes on A Windows 7 64 bit and get error message

    I am trying to install ITunes on A Windows 7 64bit and get the following error microsoft.vc80.crt,version="8.0.50727.4053",type="win32",publickeytoken="1fc8b3 b9a1e18e3b",processorarchitecture="x86"HRESULT:0x8007054F

    Are you using the 32 or 64 bit version? There are two versions of iTunes. One is for 64 bit processor architecture, one is for 32 bit processor architecture.
    Please download the 64 bit version and test it! In my view you try to install the 32 bit version.
    Kind regards!
    Philipp
    EDIT: I am sure you currently try to install the 32 bit version! It doesn't work on a 64 bit system. Are you sure that you use Windows with 64 bit?

  • I have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503

    i have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503 & 2502 errors. some apple software loaded, but it will not let me uninstall it from the machine. any thoughts, about how to get itunes to run on my machine?

    Try:
    Trouble installing iTunes or QuickTime for Windows
    Next try posting in the iTunes forum

  • When I went to bed I had 3,000  song and multiple playlists.  This morning I have ~30 songs and no playlists.  What could have happened to my songs playlists?  I run iTunes on a Windows 7 64-bit machine.  HELP! (oh, and the Songs are not in recycle bin)

    When I went to bed I had 3,000  song and multiple playlists.  This morning I have ~30 songs and no playlists.  What could have happened to my songs playlists?  I run iTunes on a Windows 7 64-bit machine.  HELP! (oh, and the Songs are not in recycle bin)
    My wife's ipod nano was plugged into the machine overnight.
    When she went running with it, there were no songs on it.  She checked the computer and was horrified to see that the playlists had disappeared and most of the songs had disappeared.
    QUESTIONS:
    1. What could it be?
    2. How can I fix it?

    Hi, there alot of us suffering from this phernomonon but there is a forum topic about is already.
    https://discussions.apple.com/message/16767377#16767377
    Come check it out.
    Hope this works out for all of us.

  • I can't install itunes on my windows 7 (32 bit), I can't install itunes on my windows 7 (32 bit)

    I can't install itunes on my windows 7 (32 bit)... it keeps saying R6034 error and 1114 error.
    Help!
    PS: I used to have an older version of itunes and it worked fine until I tried upgrading it, Now it's totally messed up!

    Hello seppht,
    I recommend following the steps in the article below when you are unable install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    You can also download the 64 bit version of iTunes here:
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Xsql save as dialog appears on Jdev Execution

    Hi i am running RedHat 7.3 with rdbms 9.0.2.1 and Jdev 9.0.3. xsu is running find in command line on Oracle Apache server, i can run the xsql demo ... so far so good in Jdev, when i want to execute the xsql file, i got he save as dialog box :( i noti

  • Flow-logic

    Hi! I need to create a logic in class to check the list pricing For that I ahve created a method with follwoing parameters IV_KNUMV     Importing     Type     KNUMV IV_KPOSN     Importing     Type     KPOSN RV_IS_LIST     Returning     Type     BOOLE

  • The error has occurred when I tried to download OS X Mavericks from the App Store

    As the screenshot above, It said the application could not be downloaded and when I clicked RETRY, it popped up the same. Can anyone solve this? How can I fix it??? Thank you for support.

  • Query - JDI Template Configuration Tool...Please guide

    Hello All, Am working on 04 version and have finished installing & configuration of basic NWDI components. There is an additional configuration of 'Template Configuration Tool' And as far as I read...its use is into administration and not development

  • New to FLEX, Writing text on a BitmapData object

    Hello, it has been quite some time since I coded in actionscript, I am a java  developer who is struggling to learn some game oriented actionscript. The problem: I have a double buffering schema using a canvas declared on the MXML  file and a bitmapd