ITunes 12 not recognizing any attached devices

I have installed uninstalled and reinstalled iTunes 12 about 3 times.  It will not recognize any of my devices, iphone, ipod, ipad, etc.  My PC is running Windows 8 and it is seeing the usb connections each time I attach a device.  iTunes does not see them.  I ran the diagnostic and it stated that no devices are connected.   I tried reverting to a previous version, but the update changed my library which the older version will not recognize.  Has anyone found a solution?

HI RAM0402,
I see that you are having some issues with iTunes identifying your iOS devices. Here is an article that will outline some further troubleshooting steps that you can take to address this issue:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-is/TS1538
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

  • Itunes not recognizing any device

    itunes not recognizing any devices - old or new

    iPad not showing up in iTunes on a PC
    http://www.apple.com/support/ipad/assistant/itunes/
    iPad not showing up on a Mac
    http://support.apple.com/kb/TS1591

  • ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, NOT ABLE TO SYNC

    Hi Everyone, just noticed an anomaly with my devices
    ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, AND NOT ABLE TO SYNC. ANY IDEAS WOULD BE HELPFUL, THANKS

    Open Device Manager and Right click Apple Mobile Device and choose Update Driver
    Select BROWSE My Computer For Driver Software
    Select Let me pick from a list of Device Drivers on my Computer
    Click Have Disk button---NOTE if the have disk option is not available. Choose a device category
    such as mobile phone or storage device if listed then Click Next the have disk button should appear.
    Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    Double click the "usbaapl" file or "usbaapl64" or if there is no driver folder look in
    C:\program Files (X86)\ Common Files\Apple\Mobile Device Support\Drivers. instead
    Click open in Have Disk Window  Then Click NEXT and then FINISH Windows will install the Drivers
    GOT THIS FIX FROM AN EARLIER POST BY J F FOURIE and it worked for me
    Hope this helps

  • ITunes not recognizing any of my devices

    Hello - about 2 hours ago my iTunes (10.7) running on a Mac w/ 10.8.2 stopped recognizing my devices (iPhone 4S w/ iOS 6), Ipad (gen 1) and Apple TV (3 gen). I reset my apple tv, turned on/off Home sharing (all devices are indicating they have the right Apple ID),turned off wifi and shut down everything. Not sure what else I can do. I even tried to connect my Remote app again to either itunes or apple tv, but it could not find either. What to do... what to do

    Hi ..
    Try these support articles ...
    For Mac >  iOS: Device not recognized in iTunes for OS X
    For Windows >  iOS: Device not recognized in iTunes for Windows

  • TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices.  I've tried everything listed.

    after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

    Updating the USB driver did work.  Referenced in other postings as Section 5.  I guess I had not tried that one.
    Thanks

  • HT204406 Updated software. iTunes not recognizing devices.

    I recently updated my Mac with Mac OS Lion to get it to version 10.6. Now my iTunes is not recognizing any of my devices nor letting me purchase music in iTunes.  What am I missing? How do I get my devices recognized with this new software version?

    Welcome to the Apple Support Communities
    The latest iTunes version is 11.0.1. Open iTunes > About iTunes to check the version, and if you don't have this version, open  > Software Update to install the most recent version

  • My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • ITunes Not Recognizing/Reading iPod

    Hello!
    I've recently had trouble with iTunes not recognizing/reading my iPod. I've plugged it in, but iTunes fails to recognize that it's been plugged in. It does charge, but that's it. I've been trying to sync my iPod, but I'm now unable to. This problem only began a few weeks ago, rather suddenly, and has not yet worked since then. I'm hoping I don't have reinstall iTunes, as I've purchased some new songs and those are what I'm trying to copy over, and I don't wish to lose those.
    I'm currently running Windows Vista, and I'm not sure which versions of iTunes I'm using. I know I was using 7 at some point, but I don't remember if I've updated beyond that. I'm also using a 2nd Generation iPod Nano.
    Any suggestions as to why this is happening and/or what I can do to fix it will be eagerly waited for!
    Thank you.

    Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various ‘generic’ solutions that you can try in an effort to correct your problem. One should work. These are listed in simplest to more involved order (usually). Read through them all, and see if one specifically matches your observed issue(s).
    First, make sure that the iPod is fully charged.
    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. However, it may take several attempts.
    Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
    Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
    Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
    Your iPod may be conflicting with other USB peripherals or network drives. If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
    -- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC
    -- Open iTunes &/or Connect the iPod
    If you do find that your Device Manager is blank, you should probably check up on this issue first: No Items Appear in the Device Manager List When You Open It
    If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
    Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
    Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
    Try using another PC if you have access to one. Even a Mac may help. Try Restoring it on the other computer and moving it back to yours.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes
    “Strange iPod Behavior within Windows”

  • ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

    After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
    Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
    My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
    Any ideas on how to get the iPod recognized again in iTunes under Leopard?

    Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

    When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

    Hi sarahdavis0_o,
    Welcome to the Apple Support Communities!
    If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • ITunes not recognizing original IPod touch after new one installed

    I tried to set up new IPod touch but itunes wouldn't recognize it. Downloaded latest version of itunes. Was able to set up new IPod touch but now old touch not being recognized by itunes. Went through the troubleshooting guide with no positive results. Old (unreconized) touch is fully charged. Restarted computer. Restarted itunes. Changes usb ports. Nothing working. Any ideas?

    Hi Jim,
    Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • ITunes not recognizing iPhone 5 iO7 on Windows 7

    I have exhausted myself dealing with this problem. My iTunes will not recognize my iPhone 5. I am running Windows 7 64 bit and my computer recognizes the phone when i plug it in, however, my iTunes does not so I am not able to sync any music. I have tried practically everything I have found on the internet to fix this problem and even the people at the Apple store could not help me with my problem. I have uninstalled and installed all Apple related programs, I have insured that the Apple Mobile Device USB Driver is working correctly but nothing seems to fix the problem. I just don't know what to do anymore because nothing seems to work. I have followed the suggestions contained in the following discussions but nothing seems to work. Thank you for your help.
    Referenced discussions:
    https://discussions.apple.com/thread/3121604?start=0&tstart=0
    http://support.apple.com/kb/ts1538

    golds04
    Re: iTunes not recognizing iPhone 5 
    Feb 16, 2014 7:45 AM (in response to oryyx)
    Had this problem this morning.
    Once in the past had to erase my iphone and reload it.That was unpleasant.
    This morning had the problem,too.
    Plugged in my iphone directly into the Imac (not hub) then clicked shut down on the imac.
    Pressed the button in the back while the iphone was still plugged in-and when rebooted iphone was visable in itunes.
    Hope this helps.
    Thanks so much for your suggestion. I'm using a MacBook Air and I just tried this with my laptop - shutting down the computer all the say (not restarting it) and then booting it back up with the phone plugged in. It didn't work but it was worth a shot! Thank you!
    Jen912 wrote:
    I had this exact same problem and just figured out how to fix it. I had to reload the driver on the iphone5 in order for itunes to recognize the device. Follow the steps here to see if you might need to do the same thing. Once I reinstalled the driver, everything works fine and I'm now able to sync with itunes again.
    http://support.apple.com/kb/TS1538
    Thanks for the suggestion, I have seen a TON of posts like mine where this is the solution. Unfortunately, I am on a Mac not Windows so the driver isn't the problem.

  • Itunes not recognizing my ipod after restoring it

    My ipod decided to go crazy on me, so I followed the 5 r's. After restoring the ipod it is no longer being recognized. I have restarted my computer, downloaded the latest software, used different usb ports but to no avail.
    There is no icon in devices that pops up. When i run a diagnostic is states that an ipod is connected.
    Any helps?

    Hi Jim,
    Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • ITunes not recognizing new PC and, therefore, doesn't recognize my IPOD

    ITunes not recognizing new PC even though it says it is authorized. The result: ITunes doesn't recognize my IPOD. It does still have my old PC name attached to my account. What can I do to rectify this situation?

    It could be a tiny bit of fluff in the dock that's preventing a particular wire from connecting. A magnifying glass and a decent light should let you inspect the port. If there is any rubbish lodged in the dock opening use a can of compressed air or a fine needle to ease it out taking care not to damage the connectors.
    tt2

  • I just had my Ipod touch replaced and I wanted to sync my content back on but its not recognizing my new device. How do I sync my stuff back on?

    I Just had my Ipod touch replaced and wantedto sync my content onto my new one but itunes isnt recognizing my new device. What do i do for it to be recognized so I can get my things back on it?

    Try here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Make sure yo have iTunes version 10.7

Maybe you are looking for

  • HT204053 lost songs due to hard drive recall - can i re-download songs i have already purchased from iTunes?

    Is it possible to download from iTunes songs I had purchased already and lost due to back-up failure?

  • Using iPhone w/ iPod speakers/dock?

    I have the altec lansing inMotion speakers and i'm wondering if I can use this with my iphone? http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=A21 59DEC&nplm=TC690ZM/A anyone know whether it is safe to use?

  • Feedback on Skype 6.21.85.104 preview for Windows

    Hi Skype team, thanks for the update.  Here's some feedback/requests/criticism for you as you've requested as such: (Claudius, they asked for feedback and not "suggestions" and not in any specific area here: http://blogs.skype.com/2014/10/09/improved

  • Render turns black when GPU acceleration + .psd in project

    Hi there, Got Premiere Pro CC 2014.0.1 / 8.0.1 (21) Build, and a weird and very annoying issue : When GPU rendering is turned ON, as soon as i'm importing a .psd (saved with "max compatibility option) into the project, make a sequence with it to make

  • Domain suffix

    I need to add 2600 domain suffix to a forest. I am trying to use the command below to read the domains from a text file. Can someone assist me with how to make this work $Domin = C:\test.txt Set-ADForest -Identity xyz.net -UPNSuffixes @{Add="$Domain"