Itunes 12 Win volume field what is it displaying?
In Itunes V12 Windows the get info for a song reveals a dialog which has a "File" tab which has a "volume" field what is it displaying?
It is not the volume adjustment that is on the Options Tab
this volume field in new to V12
Thanks hhgttg27 for your reply
I suspected it had something to do with Sound check however when I open the m4a audio files in quick time player I cannot see any volume changes in the “Properties > Audio Setting Tab volume slider”.
Also the audio tracks I’m testing this with were encoded with Itunes 10.7 from a CD.
On a Album basis, the values for songs on a album vary for instance
The Alan Parsons Project- I Robot Track Nucleus has a volume of +6.7dB
The Alan Parsons Project- I Robot Track Breakdown has a volume of -0.2dB
Do you know what software if any put these values in these files?
I have never run Sound Check. I run my own software to control volume with a VBA app that sets the Itunes “volume adjust” field after the album files have been analyzed by 3rd party ITU.BS.1770 software.
I have never found this field with the iTunes COM Interface or any quick time com interface.
With the 3rd party ITU.BS.1770 software these songs have a BS.1770 Integrated Loudness of
The Alan Parsons Project- I Robot Track Nucleus = -22.7dB
The Alan Parsons Project- I Robot Track Breakdown = -16.6dB
pretty close!
Similar Messages
-
Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are
(Apologies for butting in wiclee.)
The effect is usually caused by trouble with the Segoe UI fonts on your system. Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
iTunes 10.1 Missing Text -
Error on installing iTunes under Win 8
Error on installing iTunes under Win 8
I have recently upgraded to Win 8. When installing iTunes the following error shows:
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32",version"8.0.50727.4053.publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="amd64". Please refer to Help and Support for more information HRESULT:0x80073715.
I am running the ITunes x64 install. I have installed the V++ redistributable with no change in result.
I have subsequently downloaded and manually installed via the Apple Software update program iTunes. However this does not allow my iPad to be connected as it is not the x64 version.After spending an entire day on this issue, I figured out something that worked. After installing Windows 8 (64-bit) then Visual Studio 2012 (or 2013) then the latest 64-bit iTunes app, I got the 0x80073715 error.
What finally worked for me was:
1) Get all the Windows updates and hotfixes - especially the ones for Visual Studio.
2) Go to http://www.microsoft.com/en-us/download/details.aspx?id=14431 and download the "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"
3) Only install vcredist_x64.exe.
After running these steps, I was able to completely install iTunes on my Windows 8 64-bit instance.
Hope this helps. -
i have a mid 2011 i5 imac and i want to transfer my vinyl records to itunes but i dont know what usb turntable would be best for my imac that has compatible software for transfer to itunes
Hallo,
I use an Akai usb turntable with the Audacity sw delivered with it. To monitor during recording I also use the LineIn utility (all this on a Macbook Pro with Mavericks).
It works fine, only the input volume of the usb audio port cannot be adjusted (at least I did not yet discover how to do it) and the volume of the music is lower than other music imported into iTunes from CD or iTunes store, but still acceptable.
Success, Jean -
trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?
Hello, rodneywjr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
Jason H. -
My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
Visual C++ Errors When trying to update ITunes on Win 8.1
Visual C++ Errors When trying to update ITunes on Win 8.1
Steve, glad that you solved it yourself, but it might be worth taking on board that the steps you mention have not been sufficient for many people which is why Apple and others like myself have been offering somewhat deeper advice. Perhaps reiterating what has often already been suggested in such threads is not really necessary.
Not that you've asked for a critique of your style, but the first sentence of your post above that you are copying elsewhere is appropriate in this thread where you are replying directly to me, anywhere else it perhaps suggests that others should have been able to do likewise and comes over a tad arrogant, though I'm sure that isn't the intention. I wouldn't include it...
All the best.
tt2 -
Running Win7Pro64. Tried to update to 3.6.4 and it failed. It said to download the whole program so I did. Tried to install and says that the "License File" is missing. SO I go to un-install 3.6.3 myslef with Control Panel. All that did was remove Firefox as a listed program in control panel, all of it is still there in Explorer and it runs fine. So I go to use Helper.Exe under the Uninstall folder of Mozilla Firefox and when I click that, it says "Not a Valid Win-32 Application" What's up with that?? All I want to do is remove 3.6.3 so that I can clean install 3.6.4. I tried installing 3.6.4 two different ways with failures both times. I tried to remove 3.6.3 using two different ways, and that also failed both times.
== This happened ==
Just once or twice
== I tried updating to 3.6.4. It failed both with the update and the full download, so tried to un-install 3.6.3 in control panel, then helper.exe with no luck.You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/ -
Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?
Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)
-
my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
Screen Sharing/network problem seems confined to 1 volume. What's the fix?
I am having a networking problem on one of the volumes of my multi-volumed, three-Mac local area network, and I need a networking guru to identify the specific software file(s), application(s), or system configuration that is the cause of the problem. I have already spent several hours checking and re-checking the various hardware and system preference settings involved, and I have narrowed the problem down to a software corruption issue and/or system configuration issue on one volume.
I now need someone to identify specifically what the nature of the problem is, and how to eliminate it. I am not looking for a sledgehammer solution that says I should re-install all of the Mac OS X software on the problem volume. That may be held in reserve as a last resort. I'm looking for a more elegant approach, one that points out the specific corrupt files to remove without disturbing everything else.
Here's some background to set the context. I have a MacBook Pro laptop; a PowerMac iMac G5; and a PowerMac G4 hooked up in a network. All are running Leopard 10.5.8. All have file sharing and screen sharing enabled. Besides being able to connect to each other using registered users, my goal here is for each of the Macs to be able to share the screen of the others upon my demand. Since each of the 3 Macs can theoretically share the screens of the other 2, that makes a total of six possible connections. Five succeed; one does not. That's the problem. I am trying to determine why the iMac G5 cannot share the screen of the MacBook Pro.
The iMac G5 has no problem sharing the screen of the PowerMac G4. That connection is fast and immediate. But, every time that I hit the Share Screen button on the iMac G5 to try to connect to the MacBook Pro, I get a window with the blue barber pole spinning for two or three minutes as it is allegedly "Connecting to Mac Book Pro," followed by a window with a headline telling me that "Connection Failed to MacBook Pro." The text within that window goes on to say: "Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure that your network connection is working properly."
Well, as I indicated, the PowerMac G4 has no problem sharing the screen of the MacBook Pro, so the Screen Sharing settings on the laptop are correct; and the iMac G5 can share the screen of the PowerMac G4, so its network connection is working properly in that regard. It is only in regards to sharing the screen of the MacBook Pro that the iMac G5 is not working properly.
The reason why I say that the issue must be unique to the one volume in question, let's call it "iMacG5 Music," is that another Leopard volume on the same computer has no problem whatsoever in sharing the screen of the MacBook Pro. Whenever I boot up in that volume, let's call it "iMacG5 JMB," it makes a network connection with a registered user name immediately, and it is able to share the screen of the MacBook Pro within a second of my issuing the command. In sharp contrast to the success of the iMacG5 JMB volume, the iMacG5 Music is unacceptably slow (several minutes slow!) in making a network connection with the MacBook Pro, and it always fails to share the screen of the MacBook Pro, preferring instead to take about three minutes to attempt the connection, before announcing its failure.
Since the iMacG5 Music volume makes an immediate network connection to the PowerMac G4, as well as sharing the screen of the PowerMac G4 the moment I ask it to, I have concluded that the hardware of the iMac G5 is just fine. The problem seems confined to the system software and/or associated networking files that are unique to the iMacG5 Music volume. I just don't know what those files could be, or where the problem lies, so I've issued this call for help.
Let me add one more little twist to this puzzle which baffles me even more. I use external LaCie Firewire drives as clone backups of my Macs. As part of my trouble-shooting process, I booted up from the cloned versions of the iMacG5 JMB volume and the iMacG5 Music volume. What I learned surprised me!
The iMacG5 JMB clone worked just fine in making a fast network connection to the MacBook Pro, as well as sharing the screen of the MacBook Pro. I expected that. What I did not expect was that the iMacG5 Music clone was also able to make a fast network to the MacBook Pro, as well as share its screen!
Yes, that's right. It's weird! Screen sharing works OK when I start-up from the clone of the iMacG5 Music volume, but it does not succeed when I boot up on the source itself! I was surprised to find that out, but I'm glad I did.
(Over the past few days since I executed the last clone, I did use Drive Genius to de-frag the source volume, and maybe that has contributed to the problem I am now encountering. But it's hard to say, since nothing else seems to be amiss.)
One solution, I suppose, would be to sync the clone back to the source. But, before I do that, I'm just wondering if anyone has a clue as to the nature of this problem on the source volume and what I might do to remedy it—short of re-installing the system software or restoring from the clone. Anyone have any insight to this problem?CORRECTION #2:
Ignore the previous "CORRECTION" post.
Oops, excuse me, I wrote that sentence correctly the first time.
I was trying to point out that the ability of the iMac G5 computer to connect quickly and effectively to the PowerMac G4 when booted up into the iMacG5 Music volume was an indication (to me, anyway) that there is nothing wrong with the computer's hardware, nor its network connection ability, but that the problem lay somewhere in the files/settings used to connect to the MacBook Pro, which it cannot accomplish.
This is what happens when I get engrossed in one of these technical morasses and it ***** me into its vortex all through the night... time for bed. -
Cannot see or sort podcasts via itunes 11 (Win) like I could in iTunes 10 .. am I missing something? Same goes for playlists. I often take old-time-radio music and/or shows and need them in date-order to make them work (say, ep 1 is one date, ep 2, etc - among dozens of titles). IS there is a setting or did Apple just get rid of it? I have a laptop with iTunes 10 but have tried to get used to the newer versions on my Mom's PC. I don't want to update until I can use it the same way.
Serial radio must be in order. And I have to at least see that in the display to put it in a playlist. Podcasts that show dates from several years ago in ver. 10 no long show anything like it now. Nor, btw, does length of file play. I use it as an over night "podcast radio" and need it to make sense. aIf I need extra steps outside of iTunes okay. Just wish Apple had made it clear and it hasn't.
Thanks!Once you do get things working... Hardware crashes or virus infections happen, so you should buy software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new install or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up -
My ipod touch is disabled it says connect to itunes (because I got my password wrong loads of time) but when I go on itunes I don't know what to do!! Help please!!!
This should help: http://support.apple.com/kb/HT1212
-
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hello - I am new into ODI development and trying to create a data server for an xml file which is in my unix directory. When i try to test the connection it shows me the following error. Could you please help me overcome this. java.lang.Exception: ja
-
Hi Experts, I have a problem of trying to utilize multiple conditions on a query. I have two conditions like this: keyfigure A < 0 keyfigure A Bottom 10 What is happening is that it is finding the bottom 10 values and then filtering out the values. S
-
Several curves with several scales on the same graph
Hello, I am currently working on a project which include a data acquisition VI. I would like to display two curves with two different scales (0 to 1 and 0 to 200) on the same graph. I have been trying nearly all the options in the properties menu, I
-
Get camera roll in chronological order
Is there a way to ensure that Camera Roll sorts photos in chronological order? Obviously, the shots I take on my iPhone itself are in the right order, but ones that I import into Camera Roll from other sources (shared Photostreams, my other iDevices
-
Why are the cells in my table stretching out?
so i made a table for text and i have it all lined up and the text is in it nice doesnt exceed the boundaries of the table cells. i previes it in firefox looks good but when i preview it in safari the boxes look like they grew so the text goes into b