ITunes 5 forces upgrade to QuickTime 7--Can't use Pro anymor
So I finally got the courage to upgrade to iTunes 5 after all the hoolabaloo.
It forced me to upgrade to QuickTime 7, but I have a registered version of QuickTime 6.5 pro, which I love using.
So it appears that in order to use iTunes 5 Apple is forcing me to cough up another $30 to upgrade my privileges with QuickTime 7. Is this going to happen everytime iTunes upgrades?
I feel betrayed.
If you still have an authorized copy of you previous QuickTime 6 Pro Player that will still work under QuickTime 7 with all of its pro features still enabled. So, if you had a backup you could just do a drag install of the old player onto your new QuickTime 7 system.
If you don't have a copy of your old player then you could use the QuickTime 6 reinstaller and reauthorized your player, make a copy of same (outside of the Application directory), then reinstall QuickTime 7.
Similar Messages
-
HT4718 after upgrading to Mavericks, i can't use Pro Tools ***
after upgrading to Mavericks, i can't use my pro tools, and none of my iTunes files are there. what the ****? I want to revert back to snow leopard.
PLEASE ADVISE!!!! I'm in a panic!!
I was very happy with Snow Leopard, and then I tried to get an app to design my Christmas cards. The computer told me, i had to upgrade to Mavericks to use it.
Now everything is a complete disaster!I was not prompted to make a clone, so i dont have one. I downloaded an upgrade of pro tools that is alleged to work with mavericks, but it does not.
I can't find any of my music files, iTunes downloads, documents, etc... But, all the software i purchased to work within pro tools is there. Im so confused.
Im PC, i have never downloaded an upgrade that made all my files disappear. This is totally unacceptable. -
Just upgraded to Lion, how can I use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.
Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
This handy site can advise you what software doesn't work with the Lion.
http://roaringapps.com/apps:table -
Upgrade IOS 7.1 -- Can't use / open 3G / Data
When I upgrade IOS7.1 -- I can't use / open Data / 3G??
WHY????Try here:
Find your AppleId: http://support.apple.com/kb/HT5625?viewlocale=en_US&locale=en_US
You can get your appleID password reset at iforgot.apple.com, -
my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?
Your question(s) is/are a little hard to understand. So your husband has an iPod as well as a netbook and he wants to be able to sync iPod with this netbook is that correct? If so, he'll need to first download and install iTunes assuming the netbook is running some version of Windows such as 7, Vista, or XP.
http://www.apple.com/itunes/download/
As for importing or ripping music, he'll have to either use an external CD/DVD drive that is attached via USB or rip the songs to another PC you have with a built in CD/DVD drive. Once you have imported them to the other computer, you can transfer the songs to an external hard drive or to his iTunes library via Home Sharing.
If this isn't quite what you were looking for, please clarify.
B-rock -
Upgraded to Maverick. Can't use my mighty mouse
Using an IMac desktop. Upgraded to Maverick. Can't use my mighty mouse anymore. Bought a trackpad, hate it. It is so touchy....constantly opening any window I scroll over. Any suggestions on another mouse that is compatible?
See these for cleaning the mouse:
http://support.apple.com/kb/TA26691
http://support.apple.com/kb/HT1537
http://discussions.apple.com/thread.jspa?threadID=1243940
http://www.macosxhints.com/article.php?story=20060210115417864 -
I have installed the iPhoto Library upgrade, which confirms it was successfully installed, however when ever I try to open iPhoto 11, it refers me back to the bloody library upgrade again, so I can't use iPhoto any more.
Thanks, it worked first time that I double clicked as you suggested.
Why do Apple make it so hard to upgrade some programs? They could make the follow through instructions a lot clearer.
Now I have it open- it works and..................... it does look pretty neat. -
Just upgraded to Lion and can not use my QuarkXpress program.
Just upgraded to Lion and can not use my QuarkXpress program.
Your best bet is to check the version of QuarkXPress you have. Since Lion does not include Rosetta my guess is this may be why it is not working. Check out this site http://roaringapps.com/apps:table. This site has a list of apps that work and don't work under Mac OS X Lion.
If you are working in a production environment freelance or stuido that uses design apps like QuarkXPress, Adobe InDesign, Illustrator, Photoshop you should always wait to upgrade your OS. We have a 3 to 6 month policy for upgrading computers and software.
I hope the website helps. http://roaringapps.com/apps:table
Good Luck -
I have a MacBook Pro with Snow leopard (10.6.8). Downloaded Lion from Aplle store and got a bill but no upgrade. Bad hearing can't use telephone to support. Apple store can't help. CASE NUMBER: 19*****63.
I am hard or hearing and can't use the telepohne support and live on an island and can't get to a shot to buy the Lion.
<Case Number Edited by Host>Try d/ling again. In the App Store, option-click the tab
-
Updated to IOS 6 on IPad 2 and it has downloaded the US App Store and ITunes and replaced the UK one so can't use it how do I switch but to the UK store?
Worked out the solution had to log out and then back in
-
My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!Have you got Siri turned on in settings/general/restrictions?
-
I purchased CS6 less than a year ago; my serial number is known, but i can't use it anymore?
I purchased CS6 less than a year ago; my serial number is known, but i get the message that my trial period has ended and i cannot use the products anymore... what to do now?
Hello Sarika,
I tried to do as suggested in your link, but I can’t open the programs anymore, so I can’t get to the possibility of deactivate!
I did get the updates, but that’s all…
Any other way of getting there?
thank you for trying to help,
Angeline
[email protected]
Op 16 apr. 2014, om 00:02 heeft sarika02 <[email protected]> het volgende geschreven:
Re: I purchased CS6 less than a year ago; my serial number is known, but i can't use it anymore?
created by sarika02 in Creative Suites - View the full discussion
Hi tomaatje,
Try the steps suggested in given link:- http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Do let us know if it helps.
Sarika
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6301871#6301871
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6301871#6301871
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6301871#6301871. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creative Suites at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
have adobe id and a trail version of lightroom. my trail is finished. i can not use it anymore but i also can not download again lightroom via my creative cloud because i did already. so now i can not download and i can not use it
Try: Convert Creative Suite 6 applications to Creative Cloud membership
-
hey I've delet my iphone from icloud and I can not use it anymore. someone can help me please please ??
How did you delete it from iCloud?
What happens when you try to use it? Any error messages? -
tried to upgrade my iPhone 3GS to a higher iOS but unfortunately it had reset factory setting... now i can't use my phone anymore... tried also to connect to iTunes as instructed but only appears: WE ARE SORRY, WE CANNOT CONTINUE YOUR ACTIVATION AT THIS TIME... WHAT SHOULD I DO? THANK YOU...
No, you do not need to nor should you jailbreak your iPhone.
If you jailbreak your iPhone, you void any remaining warranty and lose
all support from Apple including this forum.
4 possible causes to activation server unavailable message:
1] activation server is actually unavailable. Happens very rarely and
does not last long on those rare occasions. Solution is to try again.
2] your firewall/internet security software/antivirus are preventing connection
to the activation server. Solution is to temporarily turn off your firewall/internet
security software/antivirun until you have activated your iPhone.
3] your iPhone has been jailbroken or otherwise hacked/modified.
4] the computer you are using to activate the iPhone has been used to
jailbreak an iOS device.
For causes 3] & 4] you are on your own as Terms of Use for this forum prohibit
discussion of jailbroken/modified iOS devices. Google may provide some direction.
Be advised that jailbreaking/hacking your iPhone may prevent the iPhone from
being able to be activated.
Maybe you are looking for
-
ICal's Mini-Calendar Confused as to Month -- creates "offsets"
This is the second time in a week I've run into this problem. A cursory look at recent threads doesn't seem to show anyone else with the problem, although I easily could have missed it. Occasionally, when I open iCal, it is "confused" as to the month
-
FIFO in pl/sql query or procedure
Hi, I have two tables: 1)Table of recieved items create table receipts (item_id number(5), recieved_date date, recieved_quantity number, receipt_id number(5)); insert into receipts(item_id, recieved_date, recieved_quantity, receipt_id) values(668, '2
-
EVHOT with links to source template Issue
Hello Experts, I have created 2 input templates. The first input template has an EVHOT function to the second template. The EVHOT function is working fine. I am having an issue because the second template has links to cells on the first template.
-
Consolidation logic error..We are using BPC 7.5 NW SP7.
Hi Experts, We are using BPC 7.5 NW SP7. We are running the consolidation for 2011.NOVEMBER as a first month and there is no data for previous months except 2011.MAR. My financial year starts on 2011.APR. When we are running consolidation using stan
-
How can I shut off spaces so I can have multiple windows open on my desktop?