ITunes 6.0.3 and Airport Express 6.3: incompatible?

I had several problems with sound dropouts in multiple speakers setup (see related posts as many other had same problem).
The only way to circumvent the problem was to use a WIRED ethernet connection between the iMac and the AX, used in client mode.
Now I upgraded iTunes to 6.0.3 and I get a message that 'your remote speakers are not compatible with this version of iTunes' , and the remote speakers are not even visible in the iTunes bottom bar.
However, if I connect in WIRELESS mode, using the AX as wireless access point, I see the remote speakers, BUT I get again the audio dropouts.
Has anyone else problems in connecting in wired ethernet to the AX with the 6.0.3 iTunes?
What is going on, is it not possible to have a decent multiple speakers setup, wireless or wired? I am really tempted to return the AX, it is really disappointing.
Thanks in advance for help

I don't feel qualified to answer your specific question but I can say with certainty that you can run iTunes 6.03 with an AEx V6.3
I am running an AExtreme as a main base (V5.7) allowing WDS and two AExpress (V6.3) as remote bases allowing WDS and both allowing wireless client connections. The network is WPA2 Presonal encrypted. I have iTunes V6.03.
The first AX is about 12 feet from the base and the second is about 45 feet from the first. I can select mutiple speakers and stream music from iTunes (even using Live 365 as my stream source through Tunes) and I have had no drops and the music has been perfectly synced. I have even used one of the Macs to stream to one set of speakers and used the PC laptop to stream to the other set.
I will admit to spending about four hours re-setting and re-configuring the AX's settings before I came up with the above combination. I spent a fair amount of time in the airport setup assistant but the finished product does what I wanted it to do. As a bonus, I got more wireless reach for the laptop.
2 iMacs, 3 iPods, APBS, 2AEs   Mac OS X (10.4.5)   Laptop PC w/iTunes on network with the iMacs
2 iMacs, 3 iPods, APBS, 2AEs   Mac OS X (10.4.5)   Laptop PC w/iTunes on network with the iMacs

Similar Messages

  • When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

    I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
    We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
    We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
    We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
    We also have two iPhones that do use our local wireless network on occassion.
    We have stereo speakers that are currently connected into one of the Airport Expresses.
    For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express).  Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each).  So far, here's what we've tried to do:
    (1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house.  They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely.  Spent a couple of hours setting everything up.  No dice.
    (2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
    (3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu).  The computer does this at random intervals on a regular basis.  The skipping, however, will occur even if the menu is not selected.
    (4)     Here's the weirdest part.  The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down.  In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals.  In this situation, the skipping only seems to occur when the menu is selected.
    At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it).  But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem.  I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
    Any help would be most appreciated!

    Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
    In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

  • Apple TV doesn't show up in iTunes when AirPort Express is running at the same time - Can't play music on both Apple TV and AirPort Express speakers together

    Hi there!
    I am trying to play music from my Mac on multiple speakers, Apple TV and AirPort Express. But as soon as the AirPort Express station is plugged in, the Apple TV does not show up in iTunes anymore. When trying the same using iPhones Remote app it works perfectly.
    Does anyone of you have an idea why iTunes does not show me both Apple TV AND AirPort Express? (it has nothing to to with the IP adress as the adresses are different).
    Thanks for any help!

    As my english isn't too good I made a screenshot to show you what I mean.
    As you can see in the image below iTunes only shows me the computer speakers and the AirPort Express. But at the bottom you can see that iTunes actually recognized 3 different speaker (Mac, AirPort, Apple TV 2). Why does the Apple TV not show up in the multiple speakers window? Any ideas?

  • Can you share iTunes music w/Apple TV and Airport Express?

    Can you share iTunes music between Apple TV and Airport Express?
    I have been very happily using 2 Airport expresses to share my itunes library from my iMac to 2 other rooms. I just bought an Apple TV for the bedroom (and I ASSUMED to replace the Airport Express), and can not figure out any possible way to have the same music in 3 rooms any more.
    Anybody have any ideas?

    I think you may have misunderstood the OP, I believe they wish to be able to walk from room to room and listen to the same music over the tv and the express. itunes will send music to the tv and the express at the same time but in two different streams, so even if you chose the same music over each device it would be quite difficult to sync.

  • Wireless modem and Airport Express.. one at a time

    Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
    I'm sure I'm just missing something in preferences or settings somewhere.
    Can someone point me in the right direction?
    Thanks, and Happy New Year!

    No ideas?

  • Connecting wireless modem and airport express

    I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
    Mac

    Hi - I have a similar issue.
    I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
    All three are wirelessly connected to my HG556a Huawei WiFi Router.
    The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
    The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
    I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
    Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
    It still dissapears from available options in iTunes and AU. ideas?

  • ITunes not playing/connecting through Airport Express

    Whenever I try to play a track in iTunes wirelessly through my Airport express iTunes always returns the error: "An error occured while connecting to the remote speaker "AirPort Express" The network connection failed".
    I can't work out what's wrong because the Airport light is green and connected to my router perfectly, there are no errors in the Airport utility and I can print wirelessly to the printer connected to the Airport using the Bonjour setup.
    I have Windows 7 and the latest versions of all software and firmware installed. Turning off Windows firewall makes no difference so it can't be that. I have tried everything I can possibly think of and have gottem nowhere. Please help!

    Darryl Rehr wrote:
    I have configured and re-configured my Airport Express, but I can't get it to receive music from iTunes.
    iTunes does recognize presence of Airport Express (named "Stereo Cabinet").
    However, when I select "Stereo Cabinet" in the pulldown menu, all I get is reduced volume output through my computer speakers... not through the stereo system hooked up the to the Airport Express.
    I've had this problem for months... posted here some time ago, but got no response.
    I am running 10.6.2 on an Intel Core duo Macbook laptop. This function used to work just fine, and I can't figure out why it no longer does. I think I had the same trouble under 10.5... but my attempts to figure it out were only sporadic (busy life, you know?).
    Can anyone help?
    DR
    sorry if i ask the obvious but have you enabled airtunes like so ?

  • AirMac Extreme and Airport Express not working with Netgear N Router?

    I've been using an AirMac Extreme (old model) as a wireless router, and Airport Express for it's airtunes functionality (conected to my Hi-Fi).
    These used to work fine, and both would show up in my Airport Utility on my Macs.
    I've now just upgraded to a 50MG broadband contract, and the engineer gave me a Network router as my old AirMac Extreme couldn't handle that bandwidth.
    When I connected my AirMac Extreme to my Netgear router I then got conflicts, sometimes it wouldn't show up, and it really slowed down my wireless signal. As a result the contractor for my broadband recommended I disconnect my Air Mac Extreme from the router. Speeds went up for the internet, but now I can't get my airtunes to work.
    What I want to know is can I just use my Netgear to transmit the broadband signal so I get maximum internet speeds, but then have my AirMac Extreme and Airport Express connected so that I can still listen to my itunes wirelessly?
    Ideally I'd like this to all be set up so that I could be conected to the internet through the Netgear wirelessly and listen to my itunes through the Airport Express at the same time.
    Thanks in advance for any advice.

    I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group,  I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

  • ITunes 9.2.1 Update & Airport Express Connection Problem

    Hey, I bought an Airport Express recently, set it up on my current wi-fi network to stream audio.. worked perfectly and we had no problems. When iTunes 9.2.1 came out, I updated straight away and since then I've been having problems with the Airport Express. Now - if I want to use it to stream music, I have to go and unplug it and then plug it back in, wait for it to start up and then it will work. If I start streaming music pretty much straight away then I'll have about 45mins of playback before it will just stop. If I try to reconnect to the airport speakers then, it wont connect and comes up with a nasty looking error message in iTunes with loads of foreign looking symbols. I have to go unplug and then plug in again and wait for it to start up again before it will work again. If I don't start playing music soon after this 'reset', it loses its connection very quickly and I have to go plug out and in again to get it connected.
    The green light is always showing, I've tried restoring to its default settings and then setting it up again, I've got the latest iTunes and Airport Express software.. but no idea how to stop this happening. Can anyone help as its getting very frustrating!
    Thanks!

    Same issue here. I just received a new Express N to replace my Express G (2004) since it was experiencing some minor stutter playing music (due to contention with the 10+ other clients on a 2.4Ghz wireless G network).
    I have a dual-band Linksys 610n (latest firmware) with a 5ghz/40mhz N only network and a 2.4ghz/20mhz G only network. With the Express N configured to connect to the 5ghz N network as a client, I have to reset it every time I want to play music or I get the garbled error dialog in iTunes 9.2.1. In addition, after resetting, it only plays music for about 20 minutes and then starts to stutter and a minute later drops out completely and has to be reset once more.
    I'm streaming from a 2009 MBPro/10.6.4 with 8GB Ram and it too is a client on the same N network. The MBPro is about 5 feet from the router and the Express N is less than 30 ft away through a few walls of drywall and wood studs. The Express G in the same configuration only experienced minor stutter during playback and never dropped from the network completely. I wanted to get the N express to remove contention by using the 5ghz network, obviously that's not going to work. I realize 5ghz has a shortened range (especially through objects), but 30 ft should be well within 5ghz reach and I have no problems with my other 5ghz devices (2 other MBPros).
    The Express N has firmware 7.4.2 and the Express G has the latest firmware for it (6.x.x).
    I'm going to try the Express N on the G network, but even if it works, I will probably just return the Express N and live with the Express G's minor stutters since there's no benefit to the N at that point.

  • After iTunes update, cannot play through Airport Express

    I've had this problem a few times.
    You've updated iTunes and you can see your remote speaker(s) within the program, but when you attempt to stream to them, you'll get an error saying that there was a probelm connecting to your remote speakers. No amount of resetting or reconfiguring your Airports will fix it. Don't waste your time doing that.
    A good check to show that your network \ airport is healthy, is if you have an iPod Touch you can stream right from there to your Airport Express. That will let you know that the problem lies somewhere on your computer.
    You are most likely having this problem because of the Windows Firewall. A quick check is to disable your Windows Firewall, then launch iTunes and try to stream. If that works, you've found your problem. Reenable your firewall.
    .....But wait. I checked my allowable programs, and iTunes.exe is allowed to pass? What gives? Well, the firewall is trying to make the console simple, and only lists the program as itunes.exe. Apparently, the firewall is looking at much more than just the process ID of itunes.exe. When the rule was set up, it likely also identified the allowable process by noting the time\date stamp or a hash of the file. During your upgrade, the filename stays the same, but the rest changes, and the windows firewall won't allow it to pass.
    To fix this, delete the existing rule allowing itunes.exe to pass. Once that's done, you can recreate the rule using your new itunes.exe file. Now that it's allowing your new .exe to pass through the firewall, you can now play to your remote speakers again. Yeah, you don't HAVE to delete the old one, but it's a lot cleaner. If you don't delete the old, you won't know which is the "good" one if you ever have to troubleshoot at a later date.
    I hope this helps. It drove me a touch nuts for a bit until I realized what was going on. Now it's part of my routine whenever I update iTunes.

    Darryl Rehr wrote:
    I have configured and re-configured my Airport Express, but I can't get it to receive music from iTunes.
    iTunes does recognize presence of Airport Express (named "Stereo Cabinet").
    However, when I select "Stereo Cabinet" in the pulldown menu, all I get is reduced volume output through my computer speakers... not through the stereo system hooked up the to the Airport Express.
    I've had this problem for months... posted here some time ago, but got no response.
    I am running 10.6.2 on an Intel Core duo Macbook laptop. This function used to work just fine, and I can't figure out why it no longer does. I think I had the same trouble under 10.5... but my attempts to figure it out were only sporadic (busy life, you know?).
    Can anyone help?
    DR
    sorry if i ask the obvious but have you enabled airtunes like so ?

  • Apple tv3 and airport express

    I don't know...... a way to send the music from Apple TV3 to an airport express?!
    Thanks for help!

    Both Apple TV and Airport Express are pulling the music from iTunes.
    Your question is a bit unclear.....are you trying to stream an online station from AppleTV over to Airport express so you can use the analog audio output on airport express?
    We posted Apple TV tips at the bottom of the page located at this link: http://www.allabouthomeelectronics.com/apple-tv-airplay.html

  • Question about Time Capsule and Airport Express co-existence

    I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode.  It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN.  The network mode in the Airport Express is set to "off".  Historically, the Airport Express has worked fine in this wired lan mode.  However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today.  After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that.  The correct / desired diagram would be the Time Capsule and Airport express as peers.  I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express.  After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

    The automatic setup in the airport utility has changed something.
    Is the line down to the TC from the express dotted.. in other words is wireless??
    Funny stuff happens.
    Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
    Make sure wireless is set to off in the express.
    Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
    So for example the bridge on the network tab.
    The summary page can also be a help.
    There is a half summary page when you click the item in the airport utility.
    There is also a fully summary page, when you hold option key and double click the TC icon for example.

  • TIme Capsule 2TB and Airport Express Base Station

    Hi,
    just received a new mac book pro, time capsule and airport express. I already had a older imac (Early 2008).
    my goal is to connect everything in a wifi at the highest possible speed. The airport express servers also as a itunes connection to my stereo.
    I followed basic instruction, all is working except that I can't have the speed a 5GHz (I verify the speed by holding the alt key and clicking on the wireless icon in the menubar) I have n but at 2.4GHz.
    what are the correct settings for this. I noticed that if I do not have the possibility to set radio modus to n 5GHz only. the version of airport configuration program that came with the time capsule is 5.5 and the time capsule is on 7.5 the airport express on 7.4.2.
    thanks for helping on this.
    Message was edited by: dannykite
    Message was edited by: dannykite

    This looks like you held down the "option" key while you clicked on the Airport icon at the top of your screen.
    You were asking about different Radio Modes for the Time Capsule
    Open AirPort Utility - Click Manual Setup
    Click the Wireless tab located just below the row of icons
    Now you will see the wireless settings.
    Hold down the option key when you click on the Radio Mode selection box to see more choices.

  • ITunes 10 does not see Airport Express because port 3689 is unavailable

    I never had problems with iTunes 9 and Airport Express, but since iTunes 10 the following problem occurs regularly: iTunes starts, but does not "see" Airport Express (AE) as an external speaker. Sometimes it also loses connection after Windows hibernate mode, but that might be another issue.
    What I found out is that it is NOT a firewall issue, otherwise it would not work once in a while. What I saw, though, is that TCP port 3689 is sometimes stolen by other apps like Mozilla Thunderbird (TB). I.e. if Thunderbird is started BEFORE iTunes, it might use 3689 as a listening socket. iTunes then cannot see AE until I shut down TB and restart iTunes. This is very annoying and I only found out after many weeks when watching TCP live connections in my personal firewall software.
    Two questions arise:
    1) If listening port 3689 is unavailable, why does iTunes not show any error message? There is absolutely no indication as to why it does not find the external AE loudspeaker. BTW, the AE config programm can connect to the hardware easily.
    2) Even if port 3689 is blocked by another application, Airfoil for Windows works flawlessly with my AE. I can even tunnel iTunes through Airfoil and then listen to music in my living room, even though iTunes does not see AE. Why can a 3rd party program do something which iTunes can't?
    There must be a way to smarten up iTunes and fix this annoying bug.

    Nerd

  • Airport Extreme and Airport Express conflict and failure

    I spent 2.5 hours on the phone with Apple and still could not get my Airport Extreme and Airport Express to function. My Apple TV failed as well:
    * Connected AEX through Airport Utility to internet. Airport Utility replaced my old configuration on my LinkSystem router. Green light.
    * Checked Apple TV. No connection available. Unplugged cable modem, waited 1 minute and tried again. Apple TV connected. No problem.
    * Flashing amber light on Airport Express for Airtunes. Does not show up in wireless device list. I call Apple.
    * Reset Express. Still no signal. Connect via Ethernet cable. Reconfigure. Green Light. Music works.
    * Check internet connection, in order. Apple TV fails. No connection to server.
    * Apple TV reset. No connection. No wireless network found.
    * Reset Airport Express. Reconfigure channel specifications. No connection with ATV or Airport Express.
    * Disconnect Airport Express. Reconfigure. With ATV disconnected I get Airport Express back. Green light but this time no music. Remote speakers appear on itunes, but no music is transmitted.
    * Did a total wireless reset on Extreme, and now both Express and ATV are not working.
    Frustrated and dissapointed I disconnected everything put back my 5 year old Linksys router and within 15 seconds both ATV and Airport Express worked flawlessly.
    How can this happen? What is wrong with this device? It is my second one in a week. The first one made no wireless connection to my Mac at all.
    After sulking for hours I tried again, this time leaving the Express out of the equation and reconfiguring the ATV to take over airtunes. After a reset it did fine. Now I have a pure n signal running at 5hz. ATV works again. So does internet.
    Any suggestions? Is there something I did not try?
    I tried the Firewall trick, the accept all incoming connections trick, the disabling of the iv6 trick, the join a wireless connection trick, and everything else Apple Care could think of.

    Maybe I was not clear enough on my post and configurations,
    I had a Linksys before I purchased the airport extreme. My airport express joined the Linksys network for the purpose of airtunes. This worked flawlessly from day one.
    Airport Extreme asked in the utility to take over an existing network or replace a router. If you chose this option it adopts all passwords, wpa/2 configurations for security and such.
    I chose this option thinking that since it is an apple product it would take over everything and work. My airport express had origianlly been set to join my old Linksys network. Since the airport extreme took over this configuration it should work.
    Apple stated many times that there seemed to be a conflict and kept asking me about the placement of my airport extreme.
    My Linksys was never part of a bridge or a network within a network. It was removed before the Extreme was ever turned on.
    After all the problems and hours of trying with Apple, i find it funny that all I had to do to restore eveything was plug my old Linksys back in and conect all the cables, and bam....it worked.
    So what is wrong with the airport extreme, or is there something wrong with itunes 8 and its interface with the express? For whatever reason the extreme cannot make the express and my ATV work at the same time.

Maybe you are looking for