ITunes 6.0.4 upgrading problems!

After recently upgrading to 6.0.4, iTunes will not open on my computer. When I try to open it, I recieve the following message:
"Quicktime version 7.0.d installed, iTunes requires Quicktime version 7.0.3 or later. Please reinstall iTunes."
I have reinstalled iTunes several times over, as well as reinstalling the lastest version of Quicktime twice. Neither has helped. Any help would be greatly appreciated.

Solved the problem. I downloaded the Quicktime standalone installer that I had found in another thread.

Similar Messages

FEB 5 2011 ITUNES 10.1.2 UPGRADE PROBLEM

I WAS PROMPTED TO UPGRADE TO ITUNES VERSION 10.1.2 AND DID SO. AT THE LAST STEP WHERE IT ASKS YOU TO REBOOT, MY SYSTEM LOCKED UP AND I HAD NO MOUSE OR KEYBOARD SO I HAD TO CTRL/ALT/DELETE. UPON RESTARTING MY PC I WENT TO OPEN ITUNES BUT IT WAS NO LONGER THERE AND NEITHER WAS MY MUSIC LIBRARY. I SEARCHED ON THE INTERNET AND FOUND SEVERAL PEOPLE HAVING PROBLEMS WITH THIS LATEST UPGRADE SO I CHOSE TO RELOAD INTUNES VERSION 10.1.1 FROM DEC 15, 2010. I WAS ABLE TO GET MY LIBRARY BACK AND IN WORKING ORDER BUT WHEN I WENT TO SYNC MY IPOD CLASSIC 120GB I RECEIVED AN ERROR MESSAGE STATING IT WAS NOT RECOGNIZED OR COULD NOT BE READ BY ITUNES AND THAT I NEEDED TO RESET IT TO IT'S FACTORY SETTINGS. WHICH I DID. IT THEN RECOGNIZED THE IPOD BUT NOW ITUNES WON'T LOAD ANY MUSIC TO IT. THOUGH ITUNES INDICATES IT IS SYNCING MY IPOD, AND I MADE SEVERAL ATTEMPTS -- NO MUSIC ACTUALLY LOADS TO IT NOW! I RECEIVED AN ERROR MESSAGE STATING MY IPOD MAY HAVE BEEN CORRUPTED???? I FIND THIS VERY FRUSTRATING TO SAY THE LEAST, WHEN ALL I WANTED TO DO WAS TO UPGRADE ITUNES THINKING IT WOULD IMPROVE IT'S PERFORMANCE AND NOW I CAN'T EVEN GET MUSIC ONTO MY IPOD!! CAN SOMEONE TELL ME HOW TO FIX THIS PROBLEM PLEASE??

Thanks for the link. I noticed that "Swut" from Orange County, Ca (see the post below) had a reply in the link you gave me referring to "Vipre" , which is an Anti-Virus program that I also use, like "Swut".
I will investigate this further. In defense of Apple, there is no way that they can test against every bit of software that we run on these PCs. I would hope that if we find out that there is some problem with the Vipre interface, both Apple and the Vipre people will be made aware of the problem.
Before I try the iTunes 10.2.1 upgrade again, I'll contact Sunbelt Software- the people who make Vipre and see if they have heard of this problem. I'll let all of you know what the results are.
Thanks- Richard Van Nostrand
"From Swut
From: Orange County, CA
Registered: Jan 28, 2008
Re: iTunes 10.1.0.56 update kills network interface - Windows 7
Posted: Dec 12, 2010 2:32 AM in response to: TG10987
I didn't have to go all the way through with TRG10987s solution. When I got to step 4 I noticed that VIPRE had installed multiple virtual network adapters on to of the network adapters. I uninstalled VIPRE thereby deleting the virtual adapters ran the upgrade, and reinstalled VIPRE. Everything works fine now.
Thanks to TG10987, who put me on the path."

Itunes 10.6.3 upgrade problems on macbook pro

I have updated itunes to 10.6.3 and it works okay until i try to go to Itunes store. It crashes. Also since I installed it everytime i try to use safari it also crashes. Any suggestions

Not to sound alarmist, but rather, cautious. Be sure that those who respond to this thread have your computer configuration before you take their experiences to heart. I cannot comment specifically regarding your machine since I do not have a mac with your configuration.
A bad sign is that the actual configurations are starting to mean something as opposed to Macs of yore when it wasn't much of an issue which model mac one owned because the software "just worked."

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?

I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

ITunes 11.1.4 "upgrade" is broken. It ruins existing installations. Others have this problem. Please withdraw this release ASAP!

iTunes 11.1.4 "upgrade" is broken. It ruins existing installations. Others have this problem. Please withdraw this release ASAP, and please fix whatever is broken. Thank you for an otherwise excellent product.

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

ITunes 10.5.3 syncing problems

Ever since I have updated iTunes I have been having problems. Half the time it won't even open or recognize my iPod at all. When it does recognize it, I receive an error when I try and sync it. Usually it's error -60 or sometimes it's an error 50. Is there anything I can do to fix these problems or is it just the newest version of iTunes screwing up?

Ever since 10.5 came out, I've been reading the RSS feed of this group to see if it was safe to upgrade, and I've been seeing more and more synch problems, especially corruption of the iPod Classic harddisk requiring reloading, and problems and interactions with antivirus. I'm very glad that I've stayed on the 10.4 version; it validates my notion of not upgrading iTunes unless you must (there was one point where the iTunes store stopped working and I had to upgrade).
I've summarized what I've seen on this forum on a post in my blog. There I've identified a site that supposedly has older versions of iTunes available, although I'd prefer a pointer to an internal Apple site. What I don't know is whether the database format is the same. You could try backing up your database (i.e., the .itdb, .itl, and .xml files in your iTunes directory), following the Apple procedure to complete remove iTunes (found at http://support.apple.com/kb/ht1925).
I don't know if Apple is aware of the Synch problems created for the iPod Classic in the 10.5.x series, but unless you need to upgrade, I'd suggest waiting. Watch this forum and see what comments show up. For those posting here... please identify the version of iTunes you are using, and what has changed on your system between the last time you were able to synch correctly and when synch started failing.
< Link Edited By Host >

IPod Songs Don't Show Up in iTunes After iTunes 6.0.2 "Upgrade"

After installing iLife '06, and the iTunes 6.0.2 "upgrade" that came with it, the contents of my 4th Gen. 40 Gb iPod don't show up in iTunes. The iPod mounts on the Desktop OK, and even shows up in the Source list in iTunes 6.0.2. And I can unmount the iPod by clicking on the little up arrow icon in iTunes. But iTunes reports only 919.2 Mb used and 36.33 Gb free in the iPod.
I tried copying a song from my iTunes Library to the iPod, and it showed up in iTunes. But when I unmounted, then remounted, the iPod, it no longer showed in iTunes. It was on the iPod, however.
I tried upgrading to the latest iPod software (iPod Updater 2006-01-10) but that didn't help.
I ran Software Update and it didn't find any software that needed updating.
I repaired disk permissions and Shutdown, then powered back up and restarted. Nada.
The iPod mounts fine on my G4 AlBook running iTunes 4.9, and the contents of the iPod are also visible in iTunes 4.9, so I'm pretty sure it's not a problem on the iPod.
Don't know if it matters, but all of the music on my Mac and on the iPod was ripped by iTunes from CDs (that I own).
Anybody else seeing this?
Is there a fix?
TIA,
Scot
G5 2.5 GHz Mac OS X (10.4.4)
G5 2.5 GHz Mac OS X (10.4.2)
G5 2.5 GHz Mac OS X (10.4.2)
G5 2.5 GHz Mac OS X (10.4.4)

This might be a quick and dirty method.
We're trying to force iTunes to rebuild properly.
With iTunes not running. Make a copy of the library database file (iTunes Library).
Try deleting the iTunes Library file. Start iTunes. Does this then show the missing tracks? To get the original playlists back you can import from the original xml file that you saved.
If you need to get back to the start point just delete the newly created database and .xml files and go back to the originals.
Powermac G5 DP 2.3 GHz Mac OS X (10.4.7) 4.5 GByte RAM

ITunes 10.1.2 upgrade on Win XP Pro SP3 Kills Internet access

The latest iTunes 10.1.2 install on my Win XP Pro SP3 system kills my Internet access. Internet status shows that I'm connected but Internet Explorer and Firefox can't connect to the server. Running Win XP Pro SP3 with all MS updates applied on a Dual-Core Intel 6600 chip, 4 gig of memory and a couple of terabytes of hard drive. When I do a restore from my backup hard drive to the prior OS and iTunes version, everything is back to normal. I didn't receive any error notifications both times from the install. I first did the install from the Apple website directly (and lost Internet access), then restored my backup system and downloaded the update separately and then installed and lost Internet access again. Am now back up using iTunes 10.1.1.4. Is this update from Egypt? (supposed to be funny).
Thanks-
Richard

Thanks for the link. I noticed that "Swut" from Orange County, Ca (see the post below) had a reply in the link you gave me referring to "Vipre" , which is an Anti-Virus program that I also use, like "Swut".
I will investigate this further. In defense of Apple, there is no way that they can test against every bit of software that we run on these PCs. I would hope that if we find out that there is some problem with the Vipre interface, both Apple and the Vipre people will be made aware of the problem.
Before I try the iTunes 10.2.1 upgrade again, I'll contact Sunbelt Software- the people who make Vipre and see if they have heard of this problem. I'll let all of you know what the results are.
Thanks- Richard Van Nostrand
"From Swut
From: Orange County, CA
Registered: Jan 28, 2008
Re: iTunes 10.1.0.56 update kills network interface - Windows 7
Posted: Dec 12, 2010 2:32 AM in response to: TG10987
I didn't have to go all the way through with TRG10987s solution. When I got to step 4 I noticed that VIPRE had installed multiple virtual network adapters on to of the network adapters. I uninstalled VIPRE thereby deleting the virtual adapters ran the upgrade, and reinstalled VIPRE. Everything works fine now.
Thanks to TG10987, who put me on the path."

I previoulsy have adding many CD to my iTunes music library and then synched them with my iPhone so that I have all music in both places. And I could the CDs in iTunes or iPhone with no problems. Recently, my iTunes "sees" the music but won't play it. Why

I have added many CD to my iTunes music library and then synched them with my iPhone so that I have all music in both places. Then I could the play them in iTunes or iPhone with no problems. Recently, my iTunes "sees" the music library but won't play any of it becuase "the original could not be found". If I attach my iPhone, then it pays them through the iPhone, but still not through the library in iTunes. How can I get the music library on my iPhone to transfer (i.e. restore it) to iTunes? I have iPhone 4S but have not upgraded to the iOS 6, and have not had any problems until last week. Help! Thanks.

Check the manual for whatever backup program you used, or, if you just copied the files over, copy them that.
How to restore data to your PC is outside the scope of these forums.

I have the error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. need help please.

error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

After itunes and q/time upgrade I get an error #63440

after the itunes and q/time upgrade whenever I try to acsess anything via q/time i get an error #63440 quick time was not found even though it is on my machine and I have removed and re-installed.

OK, here's something else to try (with thanks to B Noir and Mark Stejskal for the suggestion):
It's possible that the problem is due to an error in permission in the Windows Registry. To check (and correct) that issue, you'll need to run the Registry Editor (Start -> Run -> regedit). Look for the HKEYLOCALMACHINE section and find SOFTWARE -> Apple Computer, Inc -> Quicktime. Click on the QuickTime folder to highlight it, select Permissions under the Edit menu (or right-click on the folder and select Permissions), and make sure that your user is listed and that you have full permission. If not, correct that and see if the problem is then fixed. You may also need to check the subfolders/keys.
If you're uncomfortable working the registry permissions, you may be able to achieve the same result by uninstalling QuickTime, going into the Registry, and deleting the entire QuickTime folder (again, in HKEYLOCALMACHINE -> SOFTWARE -> Apple Computer, Inc. and then reinstalling QuickTime.
Hope this helps.

ITunes 8.1 Causes Major Problems on 2 Dell Systems

No problems with version 7 or 8.0. Upgraded to version 8.1 on two different Dell XPS desktops. On one, both internal cd/dvd drives are no longer recognized (they are shown as not working in device manager). On the other system, two USB ports are immediately disabled (again, shown as not working in device manager). The first system is about 4 years old and is 100% Intel while the second system is two years old and uses Nvidia mobo drivers with the Intel chipset. I always keep current system drive images (Acronis) and was able to recover by reverting to the earlier image(s), but the problems can ALWAYS be reproduced by installing version 8 of iTunes.
This is a problem that should be addressed, don't you think? I can't possibly be the only one experiencing these issues - though many others may not relate iTunes to hardware problems. And is there no way to get Apple Support to respond to thesye types of problems?
Message was edited by: Allan Grossman
Message was edited by: Allan Grossman

I uninstalled iTunes on an XP Pro SP3 system. The OS failed to recognize the CD with an error code 39 "The driver failed to load" etc.
I found and successfully implemented the following solution at this link:
http://www.geekswhoknow.com/articles/top10_dvd_and_cd_driveproblems.htm
It was problem #5 in their list.
5. Problem: XP - Cannot access the CD or DVD drive after an uninstall.
a. Start Registry editor as in Step 4 (just start regedit)
b. Locate MyComputer and then HKEYLOCALMACHINE
c. Expand System->CurrentControlSet->Control->Class
d. Click the subkey {4D36E965-E325-11CE-BFC1-08002BE10318}.
e. In the right pane, choose UpperFilters (ignore UpperFilters.back entry if present)
f. On the Edit menu, click Delete
g. Similarly delete the LowerFilters key in subkey {4D36E965-E325-11CE-BFC1-08002BE10318}.
h. Exit Registry Editor
i. Restart the computer
j. If the CD recording program does not work, re-install it and try again.

Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x.

Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x. If you have a fix, you can email me direct at [email protected]

Want to convert old movie files to put in Itunes.
What does "old movies" mean to you? File type, audio and/or video compression format(s)?
Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade.
Did you follow the instructions found here?
If you have a fix, you can email me direct at [email protected]
To which fix do you refer? Activatng QT 7 Pro or converting the files? Even with QT 7 Pro activated you may need to modify your QT codec component configuration depending on the file type and compression formats used to encode your "old movies." There may be many different problems here with each having one or more "fixes." Please try to be more specific regarding your questions. Converting a muxed VOB MPEG2/AC3 file would be very different different from converting an AVI DivX5/MP3 file depending on which application you are attempting to use.

10.3.9 Upgrade Problems

Hello
Just did a routine upgrade about a week ago and since have nothing but problems. Figured out the ITunes fiasco but still more problems. Mail preference got lost, clients keep calling to tell me of errors and can't send to me, get "smpt recipient connection failure error". Worse yet, apps kept crashing and even though my files were saved, if they were open during the crash, they were ruined (one in Quark, one in Photoshop). Lost major work, lost $!!! Crashed occurred without me touching a thing, just looked at the screen! Things have stabilized some since repairing permissions, except email trouble. What to do about that? Clients say my mail is turning up as junk mail. Anyone else have any of this happen?

Sue:
Welcome to Discussions.
I am not sure how easy or difficult it would be, but I would suggest a complete re-install if that is practicable. You could try the usual PRAM, Repairing Disk Permissions, cleaning out .plists running Tech Tool Pro or Disk Warrior to care for directory problems, but it is a lenthy and tedious job. If a re-install is not out of the question I suggest it. You could do an Archive and Install.
Here are some suggestions on installation:
Panther: Archive and Install
If you have the right disks here is what you do.
1. Warning: Although we will use Archive and Install there is always a risk something can go wrong. As a precaution back up your User Folder and any third party applications you can't afford to lose.
2. Check to see if you have the latest Firmware Update. Note: You must be in OS 9 to update firmware
3. Boot from the install disk holding down the C key.
4. Once booted go to the Installer Menu and open Disk Utility.
To do a clean install see Notes below
5. Run Repair Disk. If there are problems, run it until no problems are reported. If it reports that it can't repair the problems you might need TechTool Pro or Disk Warrior.
6. While still in Disk Utility run Repair Permissions.
7. Quit Disk Utility and open the Installer.
8. Choose the option to Archive and Install. This saves your data in a Previous Systems folder, which you can retrieve after installation.
9. You might want to Customize and deselect Foreign Language Translations and Additional Printer Drivers to save Hard Drive space.
10. Proceed with installation.
11. After installation is complete computer will restart. Follow prompts and set up computer.
12. Open Disk Utility (Applications > Utilities > Disk Utility) and Repair Permissions.
13. Go online and download updates, or go to Software Update under the Apple Menu and update your OS.
14. Transfer your User Folder from Previous Systems folder.
NOTE (below):
To do a clean install:
Follow steps 1 through 4 above.
a. In Disk Utility select your HD in left panel and Erase in main panel.
b. Be sure Volume Format is Mac OS Extended and the checkbox Mac OS 9 Drivers Installed is checked.
c. Select Options at bottom left in Erase panel. WARNING! This procedure will erase the contents of your entire HDD. Be sure you back up anything you cannot afford to lose!
Select option to zero all data. Click OK. Click Erase.
This process will take a while, so this is a good time to take a long walk or call your mother
d. After HDD is erased resume at No. 7 above.
Post back with any questions or comments.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4) Mac OS X (10.3.9) Beige G3 OS 8.6

ITunes 6.0.4 upgrading problems!

Similar Messages

Maybe you are looking for