ITunes 6 prints text directly on Windows Desktop
ITunes 6.0 and 6.0.1 come up, a lot of the time, printing tracks directly on the Windows desktop. That is to say iTunes doesn't have its skin and does not clear the space it is going to draw graphics on. It really only shows text when it does this. You can read the text but when you update something, new text prints over the old text without erasing the old text.
I suspect this is specific to Windows 2000, but I really don't know.
If I get this behavior, no matter how many times I restart iTunes, I can't get rid of it. But if I reboot Windows 2000, usually iTunes comes up the next time without this behavior.
I use this Windows 2000 box mainly because it has a big disk on it. I use it only for iTunes and Slimserver (the Slim Devices streaming server).
First, try the most obvious things. Make sure you have the latest drivers for your video card. Also reinstall the latest DirectX on your system. Those usually fix these sort of weird display issues.
Similar Messages
-
Printer wireless direct internet windows
just to verify: On my PC running WIN 7, I can not BOTH
print via wireless direct (WD) on my 3510
AND
access the internet on my wireless home network (WHN)
unless I:
(using WIN 7) switch between the WD network and the WHN network
or
manually disable WD on the 3510 ?
This is inherent in the WIN7/WD implementation? Yes/no?
This question was solved.
View Solution.Hi,
Indeed by connecting to the Wireless Direct network you will not have internet access, that is an expected behavior:
Wireless connection issues > How do I print wirelessly without a wireless router? > Downsides to peer-to-peer networking:
Your computer can only connect to one wireless network at a time. When it is connected to your printer, it cannot also connect to a wireless router (for Internet access, for example).
http://www8.hp.com/us/en/campaigns/wireless-printing-center/faq.html
To gather full network functionality you will need a router to connect both the printer and the internet.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
My itunes are a little distorted on windows desktop XP
I lost my songs on my itunes and had to reload my music back into itunes. The sound is somewhat distorted and bass increased. It was very clear before I did this. I have checked my sound card and all seams good and clear. Reinstalled Quicktime and it made no difference. Any Ideas
How To Fix Msvcr80.dll Not Found or Missing Errors
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Cheers, Tom -
How to Print text in two main windows
For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times.
but program prints only one window. why is it so? how can i print text on two windows.
do 2 times.
COUNT = COUNT + 1.
loop at itab WHERE DEPTT LT 200.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'TEST'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
OTHERS = 7.
endloop.
enddo.
Please guide.Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
3) Now Add another window MAIN and down at the bottom put in '02'.
Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc.
Good Luck!
Tim Stadler
Menasha Corporation -
Unable to install iTunes 11.1.4.62 on windows 8. I get
Service "Apple mobile Device) failed to start.
Verify that you have sufficient privileges to start system services.
I am trying to install it on my desktop. I am also in Administrator mode. My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
runtime Error!
Program: C:\program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contace the application's suport team for more information.
My iTunes stopped working at this time. I thought I could delete iTunes and start over. This tactic did not work.
Can anyone make sense of what I am saying and help me to get my iTunes back again?Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
When I plugged my iPad 3 into my windows desktop on iTunes the device did not show up. How do I get the device to show up to work with it????
Then do that.
Maybe you should read the User's Guide. -
Print text file with labview 2011 and windows 7
I am having some strange problem, hope someone out there knows the solution.
We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below.
If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages.
For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
Welcome to any suggestions!
Thanks
Attachments:
print vi.gif 9 KB
labview print bug.png 26 KB
SerialLabel.txt 1 KBDGU wrote:
where to check RAW or TEXT? the print report vi only asks for file name and printer name.
When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
Famous last words go something like this: "...never had to do that before." Maybe you have to do that now. It's worth at least comparing the defaults settings for bothe generic drivers. It could save you a lot of headache if you notice something different.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated. I have followed instructions found online but the library of music doesn't pull in. Thanks!
NateMigrate an iTunes library from one computer to another
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entireiTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one, with ratings, play counts, playlists etc. preserved. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd normally recommend method 1 since it establishes an ongoing backup for your library and unlike copying with Windows Explorer the process can be resumed if it is interrupted and it will continue to the next item if there are any read/access errors.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See Make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
IOS 6.1.3 / Windows 7 - 64 bit. I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab. It takes me to a Windows explorer window. How do I get it to find updates?
Hello ibebry
Try using the Software Update on your iPhone by going to Settings > General > Software Update. One thing to keep in mind if you are trying it on the computer is to make sure that you are not pressing any keys down when checking for updates as that may bring up a pop up window to find the update file.
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G. -
When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons. How can I install it so it doesn't do that? Thanks!
You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.
-
I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.
It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes -
I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Merge two iTunes Libraries? From Windows Desktop PC to Mac Laptop?
I have just bought a new Mac laptop and would like to move all my iTunes stuff over onto the laptop from my old Windows desktop PC. While this situation is problematic enough, I also happen to have some 100+ songs on the laptop that need to stay, so I'm wary of simply copying files over and overriding things. I don't want those songs, playcounts and playlists to be lost.
As far as transferring the data goes, unless networking these computers is best, I'd like to use an external harddrive. The external drive has always been used with Windows computers in the past - will that pose a problem?Download and use this tool. The drive's format shouldn't be a problem.
(31860) -
Print Invoice Header Text In Main Window of Smartforms
Helo Gurus !!!
I want to print Invoice header text in main window of smartform.
There are total 5 columns.
Item Quantity Description UnitPrice Amount
Now what I want is to print header text below Description column, there is a loop on the table in main window.
This header text will be printed only once. This is a standard header text
How to get this?
Points are assured !!!Hi Anay Kulkarni,
I understood that u need to print this header text
Item Quantity Description UnitPrice Amount
So please use TABLE instead of LOOP in the table we can prin header, main area, footer.
place the header text in header area in table... i am sure this can resolve it.....
feel free to contact me if issue is not resolved/.....
dont forget to reward points....
all the best...
Regards,
Sreeniasa Sarma K. -
I can't access iTunes store on my Windows desktop since yesterday.
I got a new Windows 7 allienware desktop this week, and I installed iTunes at the first time. I can access iTunes store via the software at the first day I installed, but I can't access iTunes store on my Windows desktop since yesterday. It always says there is a problem and I need to close iTunes when I try to access iTunes store. I tried to uninst all the related files of iTunes and reinstalled, but it still donesn't work. Now I can't download anything via my new desktop. What should I do to fix it?
Looks like we are not alone...... Must be some problem with the software! Hope it can be solved soon!
Maybe you are looking for
-
Unable to get automatic event handling for OK button.
Hello, I have created a form using creatobject. This form contains an edit control and Search, Cancel buttons. I have set the Search buttons UID to "1" so it can handle the Enter key hit event. Instead its caption changes to Update when i start typin
-
How do I undo an app update on macbook pro?
I updated my iMovie but don't like it and would like to undo the update to the older version again. How do I do that?
-
How to get the profile object in simple java class (Property accessor)
Hi All, Please guide me how to get the profile object in simple java class (Property accessor) which is extending the RepositoryPropertyDescriptor. I have one requirement where i need the profile object i.e i have store id which is tied to profile .s
-
Reg:PerformancePoint Service feature in SharePoint-2013
I am unable to use the custom site template to create a sub site in team site collection. while creating I am getting the following error. after activating "Performance Point Service feature" the issue is solved but some other site collections with o
-
Hi everyone, I am having a problem with the Chart Pie_3D. Whatever the number Y is, I get full Pie. The pie is been fill up. How do we use this chart. Thanks a lot.