ITunes 6 will not work

I have tried it all
every support option every re-install everything but iTunes 6 will just not work on my computer
any suggestions would be great!

hi paul!
Additionally quicktime will not run when i attempt to open it.
i think your intuitions are right here. a broken QT will cause these "itunes has encountered an error ..." messages on launch.
let's try a careful standalone QT 7.0.3 reinstall again.
download and save a copy of the QT 7.0.3 installer to your hard drive. (we'll run the install from there rather than online.) let's also switch off any antivirus and antispyware software prior to the install.
http://www.apple.com/quicktime/download/standalone.html
does that install go through okay? will itunes launch properly after that?
keep us posted.
love, b

Similar Messages

HT2204 Itunes password will not work when I purchase items after reseting passwords

Have used Itunes for years with no incident. Now, every time I try to purchase a song, book, app...it prompts me for my username and password. Despite knowing it....it will not work. I've logged out / logged back in several times no luck. I've updated my password successfully. But again, each time I try to purchase something, I type in my username / password and it says that it is not correct. ***. Have recently even updated Itunes to make sure everything there is up to date. Is there some virus that could be involved here. HELP!!

iOS: Troubleshooting Messages
FaceTime, Game Center, Messages: Troubleshooting sign in issues
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

ITunes error - will not work after trying to update to 7.2, then to 7.3

I have tried to update to both 7.2 and to 7.3, but both updates have failed. Now I am stuck on 7.1 with an error, where my iTunes will not operate and I cannot uninstall because it comes up with the same error that I get when I try to install or uninstall.
Below are links to images of the errors:
Here is the error I have currently:
http://i11.tinypic.com/4qfw4yc.jpg
Here is the error I get when I try to reinstall, update or uninstall:
http://i7.tinypic.com/6he0ft0.jpg
I would appreciate your assistance!

It sounds as though you need this article on trouble installing iTunes:
http://docs.info.apple.com/article.html?artnum=93976
You need the section at the end after "Important: A majority of customers..."
I think you need to do a full removal of iTunes and quciktime with clean up. But the important bit is to clean up the installer files with the MS Installer Clean Up Utility.
If cleanup doesn't seem to work, it is worth checking you have the right version of the Windows installer. If you find it in add remove programs, it should say "Windows Installer 3.1 (KB893803)"

Ipad and Itunes just will not work - see details in my post

My IPAD2 is fropzen with the message: IPAD IS DISABLED CONNECT TO ITUNES. Theother problem is Itunes does not run - it gives me some mesage about running the English language version (it's al;ways geen that). Nor will myu OS (win 8) let me remove, repair or download another copy.
Anyu ideas would be greatly appreciated.
Thank you.

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

When I try to connect my iphone to itunes it will not work, but when I connect an ipod it will. This is telling me something is wrong with my phone I am jsut not sure what that is. Can someone help me.

I was trying to update my music last night. But itunes told me it needed to be updates first. So I updated itunes, and my phone. But now when I connect my phone using the usb. It will not connect to itunes, all that comes up is a phone icon on my desk top(which doesn't allow me to do anything with) But when I connect an ipod it does connect to itune and I am abble to look at how much room is left, and the option to restore ect) . SO this tells me something is wrong with my phone it self. Does anyone know what I can do to fix this problem?
Thanks.
PS my lap top is running the new windows 8.

Hi,
Start Here:
http://www.apple.com/support/iphone/assistant/phone/
And See Here:
http://www.apple.com/support/iphone/syncing/

ITunes update will not work on WIndows 7 PC

I rec. a message for an iTunes automatic update. There was an error so I clicked try again. Then I got a message to try a manual update except now iTunes will not open. I then uninstalled it and tried to re-install but I get a message that MSVCR80.dll is missing. Went to Microsoft and installed Microsoft Visual C++2005 Service Pack 1 Redistributable Package MFC Security Update which is suppose to reinstall the missing .dll file. Then I tried to reinstall iTunes but I keep getting the MSCVR.dll missing message.
This is one big runaround!

Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

My Itunes match will not work anymore

I bought a couple of albums off of the amazon service and downloaded it into my itunes. now when I prompt itunes match to run it will not add it or any other albums to the cloud like it has before

Are you getting any alert messages? How many tracks do you have in your iTunes library?

ITunes, iPhone, will not work on Vista with DEP !!!

I am having a problem with the latest version of iTunes. If you have Data Execution Prevention (DEP) turned for "all programs and services" iTunes will lock up when you go to click on the iPhone tab in the iTunes preferences. You receive an error that Apple Mobile Device Helper has stopped working. Probably, this a new module added to iTunes for the iPhone and was not tested with DEP. The application wants to access the hardware in some way. When this happens you have to force close iTunes.
You can turn DEP on just for "essential Windows programs and services only" for an intern solution to the problem. I have not tried but I think we might have to add the apple mobile helper exe to the list of allowed applications in DEP.
I hope the apple engineers are reading the form and can look into this problem.

If your iPhone isn't being recognized in iTunes on Windows but is being recognized by your computer (can you see it in My Computer?); rather than remove/reinstall things over and over (which is an 'I hope it fixes itself' approach) just ensure that your iPhone can communicate with iTunes.
The iTunes installer isn't a very effective piece of software as you're probably noticed.
There overview of what we're going to do is:
1) We're going to make sure Apple's Mobile service is installed. By extracting the install file from the main setup file using WinRar.
2) We're going to make sure that service is started.
3) We're going to make sure the iPhone is using the right driver to talk to it.
You'll need to use the Device Manager, Services Manager and install WinRar. If these steps are too complex for you, just ask a friend to do them.
Start by closing iTunes and pluggin in your iPhone with the power on.
1) Now Make sure Mobile Service is installed (steps these follow)
a) Have a copy of the iTunes 7.5 setup file (download it if you don't have it)
b) Download winRar and install it.
c) After winRar is installed, right click the iTunes setup file (iTunes75setup) and choose extract to iTunes75Setup\
d) Go into the newly created iTunes75Setup folder
e) Double click AppleMobileDeviceSupport (.msi)
f) Install it
2) Make sure Apple Mobile Device serve is turned on via Services.
a) Go to start, run
b) type in services.msc and click ok
c) Find Apple Mobile Device, right click and choose start (or restart)
3) Install the correct driver for the iPhone via Device Manager
a) Go to start, run
b) Type in devmgmt.msc and click ok
c) Expand Imaging devices and right click Apple iPhone
d) Choose Update Driver
e) Choose 'No, not this time' radio, click next
f) Choose 'install from a specific location (advanced)
g) Choose 'Search for the best...'
h) Uncheck Search removable media...
i) Check Include this locaiton in search
j) in the text box type/paste the below line:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
If any of the driver update steps are missing or differ on your system but you see the Apple iPhone device, then you can try to change its driver to the driver in the above listed folder using whatever steps yours shows.
If you're using a foreign Windows then the word 'Program Files' may be something different like 'Programmer' so change it accordingly... You can always click browse instead and manually find the folder.
k) click next, then after it installs click Finish.
Now you can open iTunes and it will be able to detect and talk to your phone.

My itunes store will not work since I updated to version 8

How can I get my itunes store to work this problem has been going on for a long time. I have windows XP and the store said that i have a bad network connection. But I still can get on the internet. Can anyone help me please. I have installed it once already after removing it.
Message was edited by: JD Washington 12

Welcome To  Discussions JD!
I have requested that a Host, relocate your Topic to a more appropriate Forum.
As it will be transferred, it is not necessary for you to repost elsewhere, at this time.
But for future reference, please review the first entry How To Post A New Topic, on Feedback About Discussions.
That is the Forum where you erroneously posted your issue.
Enjoy Your Stay In  Discussions!
ali b

Itunes download will not work. Itunes crashes and won't open

Okay, seriously. I'm at my wits end. Please help. I have a Dell Inspiron 1420 running Vista and when I d/l itunes 8.1.1, this is the error message I get when I try to launch itunes.
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 8.1.1.10
Application Timestamp: 49d5411a
Fault Module Name: iTunes.exe
Fault Module Version: 8.1.1.10
Fault Module Timestamp: 49d5411a
Exception Code: c0000005
Exception Offset: 0052fc68
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
help!

Do you have any devices connected to your computer such as printers, webcams, etc?
Try removing them if you do. I've seen some cases of this and sometimes unplugging these devices will work.
I'd also suggest running MSconfig to ensure that there's no conflicting software. You can get all that information here: http://support.apple.com/kb/HT2292
Another suggestion would be trying to create a test user (Admin privileges would be necessary). If it's able to install in that user account, you know it's something with the user. But if the installation is successful, it should install system wide.
I would recommend trying this article: http://support.apple.com/kb/HT1926
Good luck.

Itunes 9 will not work

itunes said i needed to upgrade to the new version but when i go to open it it says C:\Program Files\Common Files\Apple\Apple Application Support\zlib1.dll or it will say error 7, i tried to delete it and install an older version but the same thing happens i have bin trying to get it to work but it wont i need some assistance could someone please give me some advice

itunes said i needed to upgrade to the new version but when i go to open it it says C:\Program Files\Common Files\Apple\Apple Application Support\zlib1.dll or it will say error 7, i tried to delete it and install an older version but the same thing happens i have bin trying to get it to work but it wont i need some assistance could someone please give me some advice

Since the last update of iTunes genius will not work it updates but nothing else

since Itunes last update I can not get genius to work, it updates but when i click on start genius nothing happens, i am verily new to this so i am not sure what to do, it did work great before this update. i now have a new ipad mini and would love to have this working.

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

Itunes absolutely will not work

i upgraded itunes, which caused it to stop working...i have uninstalled, reinstalled, system restored, tried everything. i just want my itunes back working. please help me in resolving this issue. i am running norton antivirus 2006 if this makes any difference. PLEASE HELP!!

When you installed your itunes, what happens when you go to open it? I have having an issue where is go to open and the "agreement" flashes up and then disappears. I have unistalled, reinstalled, etc with not help. Did not know if this was a blanket issue.

ITunes 10 will not work properly.

After fixing it Friday, it's acted up again today I play a song, and what happens is a 10 second freeze, followed by it going to another window and me having to go through Task manager to close.
I'm tired of this Apple, fix the damned bugs.

Hang on everybody!
The problem is that the shortcut doesn't work, and this frequently occurs after an update. Presumably (although you haven't stated so), you can launch iTunes by using the Start/Programmes method. In which case, the very easiest solution is to create a new shortcut and delete the old one.
On a Windows machine, right-click in a blank area of the desktop (not on an icon) and from the menu, select New/Shortcut. Then use the Browse button to go to the folder where your iTunes.exe file is located. That should be something like C:\Program Files\iTunes\iTunes.exe. (My Windows 7 is C:\Program Files (x86)\iTunes\iTunes.exe)

Since upgrading to itunes 12, my Itunes match will not work.

It shows it sending data to match, then when it states it is getting the macth results,(second step) it just hangs. I let it run over 8 hours.
I cannot get my new songs to the cloud so I can use them on my Iphone.

Hi
Try clicking on stop match. Next, go to menu > store > select update iTunes match. If this does not solve problem, hold option key whilst turning off match. Close iTunes. Reopen iTunes and turn on iTunes match, select add this computer. See if process completes.
Jim

ITunes 6 will not work

Similar Messages

Maybe you are looking for