ITunes 64-bit and Windows 7 Ultimate 64-bit

I have a relatively new installation of Windows 7 Ultimate 64-bit and have not moved the "Music Folder" to a new location. I have moved the "My Documents" folder to a new location tho. Inside of the "My Documents" folder, I see folders named "My Albums" and "Music Lyrics", but no "Music" or "My Music".
After installing the 64-bit version of iTunes, I get the following error.
The folder "iTunes" cannot be found or created and is required.
The default location for this folder is inside the "Music" folder.
I have researched and seen many references to this error and Windows XP, but nothing for Windows 7.
Ideas?

Something may be awry with the special registry permissions on the My Music folder, Just. I think the iTunes installer looks for those in order to determine just where the default location of My Music is on a given computer.
But since this is a first-time install, the situation should be pretty simple to recover from.
Hold down the shift key when you go to launch iTunes. In the dialog box that comes up, select "Create library" and put the library where you please.
Probably a good idea after doing that to try launching iTunes again, just to make sure that it is still finding the iTunes folder. But by default, next time you open iTunes (after creating a new library), it should try to open the library in the location you created the library in.

Similar Messages

  • ITunes 10.4 and Windows 7 bug thread

    I thought I would start an entire thread devoted to iTunes 10.4 and Windows 7 bugs since there are MANY people reporting various issues and may not know about all of them. Hopefully this will combine a list of all bugs for reference and help others. So far, most of this effects Windows 7 64 bit, but some are reporting issues under 32 bit too.
    I have spoken with both Apple Care and a higher level tech at iTunes support. The iTunes support tech said they were "looking into all reported bugs and are aware of issues with version 10.4, especially under Windows 7. They encourage others to report their bugs to iTunes support so they can work on this and find all the issues.
    KNOWN BUGS:
    Album Art copy/paste broken - A bug that causes copy/pase from clipboard where album art is not displayed in the info tab as before. Some have reported success by dragging the image file over to it vs copy/paste method but it is still very much spotty and a known bug.
    iTunes store not working - Some have been effected with the iTunes store not working properly for them. Personally I don't have a problem but this has been for some.
    "Purchases" link not working in iTunes - When you click on "Purchases" link on the right column, all your purchases are missing and do not show up. This includes, music, movies, apps, etc. This is also a known bug and one that I have personally. Works fine in iTunes 10.3 for Windows 7 64bit and also works fine under both Snow Leopard and Lion OS.
    Sync issues - Some have reported syncing issues since upgrading to 10.4 iTunes on Windows 7. This is a bit spotty as well as I have no trouble but there are others that have reported issues.
    Solutions:
    For now, the only way to fix this is to use iTunes 10.4 under Snow Leopard or Lion OS. Also, you can uninstall (not repair) 10.4 and install 10.3 again which should work.

    You are correct and I wish that I had known this before spending 4 days and a lot of trouble going over this with both Apple Care and iTunes support. They had me jumping through hoops and didn't know anything until it was finally escalated. Only then did I get a vague response like I mentioned in the first post. It's troubling to me how a simple response from anyone there could've just said we know about this and they are bugs in 10.4 causing this.
    There are other issues too as you point out with the syncing and crashing. Anyway, hopefully others will find information here more useful than calling Apple for help. Not much we can do now except roll back to 10.3 for those that kept it and hope also they can updated Apple Application Support component.

  • I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • ITunes and Windows Vista Ultimate 64-bit

    Is there an iTunes version that is compatible with the 64-bit version of Windows Vista Ultimate? If so, can you please let me know?

    I have iTunes 7.3.2.6 running on Ultimate Vista 64. I initially had problems with it recognizing my DVD-RW but eventually found a solution in this group related to the GEAR drivers.
    The only problem that remains is not recognizing the current user as administrator unless you "launch as administrator." But this has not affected performance.
    BTW, when application developers list "32-bit Vista" under system requirements, this does not mean that 64-bit Vista versions can't run it, it only means that it's not a 64-bit app. Vista 64 is designed to run 32-bit apps.
    Message was edited by: erazoner

  • Burning issues with itunes and Windows Vista Ultimate

    I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
    Thanks

    paul's onto it.
    if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
    here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
    GEAR drivers

  • My pc windows vista home system and Windows Vista Ultimate both service pack 2 and itunes do not recognize the ipod touch 4g, ios 5

    my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'

    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
    How to enable iTunes in the Windows XP Firewall
    EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
    How to enable iTunes in the Windows Vista and Windows 7 Firewall
    Message was edited by: b noir

  • I tunes 7.3  and Windows Vista ultimate 64 bit ( not 32-bit) compatibility

    Dear All,
    I tried succesfully to sync my I tunes with my HP Laptop with the Windows Vista Ultimate OS 64 bit not 32-bit version.Has anyone been able to sync it succesfully?
    If not does anyone know of a patch or when apple is going to come up with a version of Itunes that would take care of this incompatibility?
    Mo

    Hi,
    Try disabling your antivirus software. This seems to work for alot of people Tell me if this works for you as well.
    xxmitchxx90

  • Problems with Fingerprint Reader on Touchsmart TX2-1274NR Notebook and Windows 7 Ultimate (64-bit)

    I have just upgraded my tx2-1274nr to windows 7 ultimate (64-bit) [my university released the upgrade a week early] and I followed the directions provided by technical support and downloaded/installed all the updated drivers and software.  Everything works great (actually better than great) except for two problems.
    The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
    This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters?  I am not sure if this is important.
    Any assistance would be greatly appreciated.  I am really loving the new system, especially the multi-touch (installed the drivers from N-trig)!!
    Thanks

    Hi,
    dclane wrote:
    The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
    Check this and this thread. You need Authentec TrueSuite.
    dclane wrote:This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters?  I am not sure if this is important.
    If You have any version of Quick Lunch Buttos installed uninstall them and install this here which is provided by HP for Win7.
    Message Edited by Daniel_Potyrala on 10-16-2009 12:35 AM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Issue with Bootcamp 5.0 and Windows 7: Ultimate 64-Bit Install

    HERE are the specifications of my iMac.
    I am trying to install Windows 7 Ultimate 64x on a 150GB partition i created using bootcamp 5.0.  I get to the point where it finalizes the windows setup, and then it says "Setup Up Desktop for first use" or something of that nature, it restarts then, and goes straight to a black screen with a black cursor.  I have tried to get to the BIOS to change the boot order (thinking it may be something to do with the boot order) but I won't even let me access that!  Any fixes would help a lot!!
    I was using parallels before this, but I want a seperate partition so I can play games that are too high demanding (graphics wise) to run in a VM, the crash on start every time. Some run, but very choppily.
    Also, I am running the latest edition of mountain Lion if that helps...

    ANYONE!?

  • Need some help please, itunes 7.1 and Windows Vista

    Hello,
    I've got a bit of a problem here with itunes and my ipod nano.
    Basically I'm using Windows Vista Ultimate 32bit and when I connect my ipod to my PC the found new hardware wizard pops up but can never find the ipod nano.
    In disk management the ipod is showing up but in itunes its not.
    Could anyone advise on this please?

    A little update about this issue and it's good news. I've managed to get the ipod show up in disk management with the ipods name and when I open itunes and plug the ipod in, it pops up in itunes.
    Heres it is just like it should be, a result!
    http://img291.imageshack.us/img291/1293/untitled1ln0.jpg
    Basically what I did to fix this issue in Windows Vista was the following
    1.Click Start type run in the search bar and then msconfig.
    2.Click on the Services tab and "hide all Microsoft Services".
    3.Click Disable All for all the non Microsoft services that are showing.
    4.Click OK
    5.Click Restart.
    6.When your desk top loads up click OK for the msconfig menu which pops up.
    7.Open itunes and connect your ipod.
    It should now show it does for me.
    Now follow step 1 again and load all services as your pc would start normally again and reboot, again your ipod should show up now as it should.
    I hope that's useful if anyone else experiences the same.

  • Problems with iTunes Cover Flow and Windows Vista

    I just recently upgraded my computer to Windows Vista Home Premium (32-Bit). I preformed a clean install and every program I have tried so far (Battlefield 2, Battlefield 2142, Age of Empires 3, Halo: Combat Evolved, Microsoft Office XP, etc.) have worked fine, however, iTunes is having some problems (7.4.1.2). First, cover flow does not work right. It can get it to run, but it is super slow. It ran very smoothly on Windows XP, now on Vista it skips every over album cover and is very choppy. It seems like it is running at 3 FPS. Also, none of my videos will play in Quictime or iTunes. The strange thing is I can play the same videos in VLC and GOM and they work great. I just went to nVidia's web site and installed the latest drivers and my games runs fine so I don't think it is a driver issue but I am not sure.
    Any advice I would appreciate,
    Thanks
    Message was edited by: Full-Throttle

    Full-Throttle wrote:
    I just recently upgraded my computer to Windows Vista Home Premium (32-Bit). I preformed a clean install and every program I have tried so far (Battlefield 2, Battlefield 2142, Age of Empires 3, Halo: Combat Evolved, Microsoft Office XP, etc.) have worked fine, however, iTunes is having some problems (7.4.1.2). First, cover flow does not work right. It can get it to run, but it is super slow. It ran very smoothly on Windows XP, now on Vista it skips every over album cover and is very choppy. It seems like it is running at 3 FPS. Also, none of my videos will play in Quictime or iTunes. The strange thing is I can play the same videos in VLC and GOM and they work great. I just went to nVidia's web site and installed the latest drivers and my games runs fine so I don't think it is a driver issue but I am not sure.
    Well - you're not alone. I've got a very high-end video card (nVidia 8600 GTS OC), and am running Windows Vista Ultimate. Every aspect of 3D acceleration works great with my machine (World of Warcraft, Battlefield 2142, Half Life 2, Counterstrike: Source, etc.), except iTunes/Quicktime. I pretty much have the same issues: videos (all - .mov, .mp4) play absolutely horribly in both applications, and cover flow is slow/choppy at best. I think it's an iTunes/Vista issue that Apple has yet to touch, so I'm just waiting for January (I'll buy my first mac, a macbook pro, then), because for the first time in my life, I'll have an installation of iTunes that functions properly. I love iTunes. Just not on Windows machines. It leaves something to be desired.
    Message was edited by: william.garrison

  • Itunes continually freezes - Running Windows 7 Ultimate

    Can anyone assist - my iTunes continually freezes and I have to end the process and try again.  Sometimes this works, sometimes it doesn't.
    My PC is a Corei7, 12 GB ram running 64 Bit Windows 7 Ultimate
    This is extremely frustrating - my prior PC's running both XP and Vista had similar issues
    Appreicate any direction

    Try working through this troubleshooting article:
    http://support.apple.com/kb/TS1717
    If you had similar problems on other PCs, it makes me wonder if you have software in common that does not play nice with iTunes.

  • ITunes 9.2 and Windows 7 Install problem

    I've posted a problem here already, but now I'm on the actual machine. I removed all the Apple software to include removing iTunes 9.1.1.12
    I rebooted the machine (running Windows 7 Ultimate)
    Download a fresh copy of iTunes 9.2 and it installs up to the part where it tries to start the Bonjoure (spelling) service. I get this error:
    Log Name: System
    Source: Service Control Manager
    Date: 6/25/2010 8:55:25 PM
    Event ID: 7024
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: Kids-XP
    Description:
    The Bonjour Service service terminated with service-specific error The parameter is incorrect..
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2010-06-26T01:55:25.215200000Z" />
    <EventRecordID>267832</EventRecordID>
    <Correlation />
    <Execution ProcessID="524" ThreadID="1780" />
    <Channel>System</Channel>
    <Computer>Kids-XP</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">Bonjour Service</Data>
    <Data Name="param2">%%87</Data>
    </EventData>
    </Event>

    A Solution (install iTunes without Bonjour) ... aka "How to Hack the Install"
    I've had exactly the same problem using my new iPhone 4 with Windows XP home. I had completely removed a previous version of iTunes and got the same error message giving a 3014 error against Bonjour part way through a fresh install of iTunes 9.2.1.5 ... After much searching on the net in desperation I took the install to the failure point again and then powered off the PC. I was curious what state this would leave the install ... I nosed around the hard disk on startup but the software wasn't there. Then I checked out the temporary folder under my user's "Documents and Settings" folder:
    i.e. c:\Documents and Settings\<username>\local settings\temp and in there I found a new folder containing all of the "separate" installable ".msi" files for the different components of iTunes including a file bonjour.msi
    The solution then is as follows:
    a) Do the install until it fails with the "Bonjour service cannot be started" error.
    b) BEFORE you rollback the install (i.e. with the error pop up still displayed) navigate to your "C:\Documents and Settings\<username>\local settings\temp" folder and *make a copy* of the .msi files from the created folder (you will find a folder with a random name which is different for each install). You should have the following files (keep them together in one folder):
    SetupAdmin.exe
    AppleApplicationSupport.msi
    AppleMobileDeviceSupport.msi
    AppleSoftwareUpdate.msi
    Bonjour.msi
    iTunes.msi
    QuickTime.msi
    Note that if you try and find the files after cancelling the installation they won't be there as the installer removes them as part of its clean up routine.
    c) Roll back the install by cancelling.
    d) Completely remove all traces of iTunes, Quicktime etc... see: http://support.apple.com/kb/HT1926
    e) Reboot
    f) RENAME or DELETE the Bonjour.msi from your copied folder so that the install won't be able to find it.
    g) Double click the file from your copied folder iTunes.msi - the install will then go ahead and _will not_ install Bonjour.msi as it cannot find the bonjour.msi file.
    I have tried this solution and it has worked using an iPhone 4. There may be some functionality missing in iTunes but as yet I haven't found it. The main thing was to get iTunes installed from scratch so that I could actually use the phone. Since applying the solution I have done an upgrade of the iPhone software to 4.0.2 so the phone is working fine with iTunes.
    Hope this helps,
    Phil

  • ITunes 10.1.1 Windows 7 Ultimate x64 Issues

    I have recently upgraded my windows system to Windows 7 Ultimate x64 and after installing the latest iTunes i realised that i couldn't connect any of my mobile devices (2x iPhone 3G's or my iTouch 4G).
    After hours of researching the web i came to the conclusion that the latest version of iTunes doesnt contain the proper driver files for my specific system.
    Has anyone else had this problem ? Or is my (brand new) pc busted ?
    P.S. After uninstalling iTunes 10.1.1 for the Millionth time, i installed the older 10 version and it worked perfectly.
    I am going to try updating through the iTunes updater to see what happens.

    No problems about the late response. Discussions has been quirky for a lot of people lately.
    Since we last spoke, labnut2 has posted a nice step-by-step version of the RandomBehavior instructions in the following post:
    http://discussions.apple.com/thread.jspa?messageID=12739276#12739276
    Good luck for next week!

  • ITunes 10.6 and Windows 7 - iTunes stops working!!!

    Installed iTunes 10.6 and now I get the iTunes has stopped working message when I attempt to add folders or sync my devices.  I have uninstalled and re-installed to no avail.  I have tried safe mode but it still will not sync.  This only started after the update to 10.6.  Everything was fine until then.  I went to the Apple store and they were NO help at all, referring me to the iTunes support page on the internet.  DUH!!  Did that already!  Please, if anyone has solved this issue, tell me how.  I tried installing the old version of iTunes, but then it wouldn't open because the library was created by a newer version...so frustrating!    Please help!

    Mac prints. PC does not. Bonjour Printer Wizard found the printer, so there's some communication between the two (although the printer never came on, but I assume the AX knows what it’s plugged into).
    One odd thing is that, after installing the printer driver (downloaded from Brother), Bonjour Printer Wizard listed Brother as a printer manufacturer three times, only one of which shows the HL-2040.
    The las time I tried printing from Windows the printer turned on, but did not print.

Maybe you are looking for

  • MacBook Air 11-inch, Mid 2013 won't boot with external USB keyboard

    Hello, Just bought a MacBook Air 11-inch, Mid 2013 (8GB, i7, 512GB SSD) today. All available software updates are installed (OS X 10.8.4 (12E3067)). Also have a Macbook Pro Retina. If I connect a external USB keyboard (Kinesis Advantage Pro USB) to t

  • Pages 5.5.1: fit width view doesn't adjust

    Other than the answer 'keep using Pages 09 until I absolutely have to switch to something else', is there any way to get the fit width view in latest Pages to adjust as you resize the window?  In 09 the page is responsive, and if I change the window

  • Probably a stupid question, so should be easy answer! : )

    Okay, I have a mac.com email address.  I just moved everything over to iCloud.  Does this now mean my email address changes to [email protected] or can I continue to use the @mac.com?  Are they interchangeable or what is the deal?  I want to keep mac

  • Looking for an audio interface with the following criteria

    -Firewire -At least 4 mic preamps -MIDI in/out -Optical ("lightpipe") outs to the active monitors Will I need to get a separate interface and midi or preamp box to get all this? Is there an interface out right now that satisfies these criteria? Advan

  • Popup blocking exceptions

    I must be missing something quite obvious, or it just doesn't exist. Right now, I do not use the block popup windows features because there are a couple of websites that use popups as a part of their functionality. In Firefox, I can block all popups,