Itunes 64-bit on Windows & 64-bit does nothing but give errors!

I've been trying to connect Iphone 3g 4.0.1 on Windows7 64-bit since last 5 days! Tried almost all the tips found on internet regarding this issue and none worked! At first simply downloaded the latest iTunes 9 (64-bit). It didnt work at all and I ended up seeing different errors. Then read this;
http://www.sevenforums.com/installation-setup/4318-release-notes-important-issue s-beta-release-windows-7-a.html
Tried that too and still getting nothing but errors. In last 5 days I encountered the following variety of errors;
Device Manager -> Portable Device -> MTP Usb Devie -> Device cannot start (Code 10)
Device Manager -> Portable Device -> Apple Iphone -> Device cannot start (Code 10)
iTunes -> iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000023)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000035)
iTunes -> iTunes could not connect to the iPhone because an invalid response was received from the device (0xE8000001)
I even tried programs like iPhone Explorer, DiscAid, iFun-box etc. None worked. And now looking for a final answer. Will it work on Windows 7 or not? I am too tired of trying now.

I don't know if this will help, but folks on Windows systems (typically laptops) with PM55 chipsets (like their brethen with P55 chipsets and other chipsets in the 5 series and 3400 series) have been reporting a lot of trouble with iPod/iPhone syncing (in particular, 0xE0000065 error messages, but the symptoms may vary).
In cases where no BIOS updates are available, and the BIOS does not have a user configurable C-STATE setting, some success has been achieved by using an old trick ... changing the power management settings on the USB Host controllers, as per the following document:
http://support.apple.com/kb/TS1401
When attempting to connect iPhone or iPod touch, you may see one or more of the following error messages:
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800000a)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800006b)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)
Alternatively, the error may be the same as above but end with a different number. See:
http://support.apple.com/kb/TS3221
(thanks to B Noir for the tip)
Hope this helps.

Similar Messages

HT201263 iphone4 stopped working, restore does nothing but show error 14

One day my phone just crapped out on me. I tried charging it but nothing works, so I decided to totally factory restore it. only that didnt work and now the phone is stuck on the spple screen. The restore gets to the end and then pops uo error 14 and cancelles the restpre. The phone does absolutely nothing and i am desparite. Please help!

One day my phone just crapped out on me. I tried charging it but nothing works, so I decided to totally factory restore it. only that didnt work and now the phone is stuck on the spple screen. The restore gets to the end and then pops uo error 14 and cancelles the restpre. The phone does absolutely nothing and i am desparite. Please help!

Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall

After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success. After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes. When I try to launch iTunes, I get the following error messages:
"iTunes.exe - Entry Point Not Found
The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
When I click OK, I then get:
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
(As I stated above, reinstalling hasn't worked!)
In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them. I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music. Any help would be greatly appreciated! Thank you

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

ITunes 11.2 for Windows (64-bit) hangs when opened

Hi
I recently updated to iTunes 11.2 for Windows (64-bit) on both my PC & laptop which both run Windows 7 and are apart from this problem with Itunes are very stable.
After installing the updates, each time I try to launch Itunes the program will open to show the main window but then I get the following:
I cannot make any of the functions respond (via mouse or tabbing)
The "timer circle" (Same as Apples "egg timer I guess) just runs & runs.
Eventually after say 20 mins, I get the standard Windows message about Itunes has stopped.
I then have to exit via this message window, whcih closes the Itunes program down.
I cannot find any conflicts with spyware etc and all other programs etc are running as normal, any ideas if this is a bug in iTunes 11.2 for Windows (64-bit)? Or is there something else I can try?
I have tried completely uninstalling & reinstalling the software, but that failed too (and I do not know whow to find a previous release of Itunes to try again!)
Thanks in advance for your assistance.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How do i know if my itunes is compatible with windows 64 bit?

How do i know if my itunes is compatible with windows 64 bit?

Did you download the 64-bit installer?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

What i need to migrate portal EP 7 windows 32-bits to windows 64-bits

Hello,
What i need to migrate portal EP 7 windows 32-bits to windows 64-bits.
database ORACLE 10.2.0.2.
thanks

Hello,
i see this step in system copy installation guide.
can i do this without do a hetgenreous system copy ?
Windows Oracle: In chapter "Generating the Control File Structure" of the system copy guide for the database specific system copy procedure, add the following information as Step 1:
If you want to migrate your database from 32-bit to 64-bit or vice versa, add the following lines at the bottom of the control.sql file for Oracle 9.2 or Oracle 10.2:
Oracle 9.2: shutdown immediate
startup restrict
spool utlirp.log
@?/rdbms/admin/utlirp.sql
spool off
alter system disable restricted session
Oracle 10.2 shutdown immediate
startup upgrade
spool utlirp.log
@?/rdbms/admin/utlirp.sql
spool off
Shutdown immediate
Startup
Spool utlrp.log
@?/rdbms/admin/utlrp.sql
Spool off
exit

Windows Virtual PC (VMWindow.exe) does nothing but open a dialog box labeled user "Virtual Machines"

Windows Virtual PC (VMWindow.exe) does nothing but open a dialog box labeled <user> "Virtual Machines"
Running Win 7 Pro 64 bit SP1 on an Asus Z97 Pro socket 1150 mobo, with Intel VT-d both Supported and Enabled in the BIOS.

I am attempting to use Win Virtual PC as one would use VirtualBox or VMware Player.
I thought I stated my case clearly.
Are you proposing that Win Virtual PC functions ONLY to run Win XP in a virtual machine environment?
Bill
No, I just suspect you would like to install XP mode on virtual machine.
Supported guest operating systems in Virtual PC:
•Windows XP Service Pack 3 (SP3) Professional
•Windows Vista Enterprise Service Pack 1 (SP1) and later versions
•Windows Vista Ultimate Service Pack 1 (SP1) and later versions
•Windows Vista Business Service Pack 1 (SP1) and later versions *
• Windows 7 Professional *
•Windows 7 Enterprise.
•Windows 7 Ultimate
• Windows 7 Professional (SP1)*
•Windows 7 Enterprise (SP1)
•Windows 7 Ultimate (SP1)
*Note Virtual applications are not supported on Windows Vista Business or on Windows 7 Professional or on Windows 7 Professional(SP1). All other features of Windows Virtual PC are supported on these two guest systems.
In addition, refer to this guide to create virtual PC before using:
How to Create a New Virtual Machine in Virtual PC
http://support.microsoft.com/kb/826291
Kate Li
TechNet Community Support

I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi.

I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi. I have tried removing the old version in add/remove programs, but it says the same error. I tried deleting every thing that has itunes in the file/folder/etc and it didn't help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

Hey jtom234412,
Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
Thanks,
Matt M.

IPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

iPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

I was able to get it fixed. I had received some responses and they had me
recreate the library I believe. It's been a while so I cant remember
exactly what I did. I have since upgraded to the latest i photo version and
have had no problems with it.
Brian
On Friday, November 7, 2014, Apple Support Communities Updates <

Problem with IPad , did an update as requested now it does nothing, but display a graphic that shows I should connect to ITunes . So I connect it to my IMac run ITunes nothing happens. Try restore pop up says not eligible for restore.

Wow what a pile of crap you must wade through to ask a question .
Ok so the problem is I did an update on my IPad and now it does nothing but show a graphic showing the power cable connecting to ITunes
So I connect iPad to my IMac and prompt iTunes nothing happens. So I try sinc nothing happens.
So I try restore and the popup says I am not eligible for restore.
What is going on with this stupid machine

Machines are incapable of being stupid. Not so of their operators.
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Since uploading Maverick, my Microsoft apps give an error message "(the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. What to do?

Since uploading Maverick, all of my Microsoft apps give an error message "(name of the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. I have to click on the "OK" button to get rid of the error message. What to do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

3000 K100 does nothing but beep

Model #: 57068347
OS: Windows Vista
I went to bed and the computer was working. I wake up the following morning, the screen is blank, and the machine is doing nothing but beeping. I tried cycling the power and still nothing. No POST screen, no response from the keyboard, nothing. Just repeated beeps from the speaker and that's it.
I cruised through the support forums a bit and didn't find much that was useful. Anyone got any ideas?
thanks!

epicdave,
What can you tell us about the beeping? Generally with PCs, there will be a series of long and short beeps in some kind of repeating pattern which can indicate what component is causing the trouble.
Can you discern the number of beeps before the pattern repeats?
Failing that, or more generically I would suspect memory, system board, power supply.   I'm going to suggest that if you are still in warranty that you contact service.   If you are outside of warranty, I'll offer the following things I might try...
1) Memory - remove and reseat the memory. While you have each module out, check the condition of the little gold contacts. If they look dull or have dull spots where the contact is made (you will see the slight rub marks where the socket engages each tiny contact pad on the module) you can gently use a pencil eraser to clean the contacts on the memory - just rub the eraser back and forth a couple times gently and then wipe away any of the eraser material. Re-insert in the sockets and try to power on the PC again.
2) System board - could be any number of componenet failures which would require a board replacement. Depending on the BIOS, the beep codes can sometimes identify which component to confirm the diagnosis. Try removing any expansion cards and power up again.
3) Power supply - less likely as it sounds like it is working to some level since the system is beeping.
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

My 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down.

my 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down. Then I've connected it to my macbook pro, and I've seen the script "Please Wait - Very Low Battery", but, after some time, the iPod tries to start up again, and nothing happens. It's a kind of noise, I'm thinking about the hard disk, (it's a 80Gb version), and I'm listening to it; every 30 seconds seems to try to open and then shut down again. I can't see the iPod in iTunes too. Don't know what to do. Can someone help me? Thanks a lot, it's my first forum

It sounds like the battery could be going bad as well as the iPod's Hard drive. You'll want to have the iPod serviced either by Apple or a third party repair company. Here is Apple's pricing:
http://www.apple.com/support/ipod/service/prices/
Google for "iPod repair" and you should get a ton of results to work with.
B-rock

Maybe its just me but verizon had my rebate for a month and some change and still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im

maybe its just me but verizon had my rebate for a month and some change and still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im looking into a lawsuit now so aggravating..my phone is def on a blank sceen right now

JCLouis,
We saw your story and are very worried about what we read! This isn't like us at all and we are here to help sort it all out. We recommend calling the Rebate Center to check on the status. Their number is 1-800-457-0864.
We can help you right here with your phone! How often does it turn off? Is it just that the screen goes black or does it completely power down? Also, does it start back up by itself if it does power down?
SarahO_VZW
Follow us on Twitter @VZWSupport

Itunes 64-bit on Windows & 64-bit does nothing but give errors!

Similar Messages

Maybe you are looking for