Itunes 64 bit will not complete install for windows 7?

When I attempt to install iTunes 64 bit for windows 7 the installation process stops and the follwoing message appears:
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Any idea how to fix this?

"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Similar Messages

ITunes 10.5 will not complete install in Windows 7 x32

Message: Problem with Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
Is there a solution? Is this an Apple or PC issue?

"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I am trying to install the latest update for HP Printers, it will not completely install ,now my printers won't work. Help!

I am trying to install the latest update for HP Printers, it will not completely install ,now my printers won't work. Help!

Hello Carolyn - Thank you for your quick response to my concerns, I had already gone to the HP support site and tried to get the latest HP drivers, the site said for Lion 10.7 there was NA version. So, I just used my time machine to replaced the OS from that time spot. I got my printers working again, so all right with the printer. But, the fact remains that I still keep getting the New Update HP Printer in the software update window. But, what happens if I try to download and install it is this: It starts the download, everything seems to come down fine, it starts write the files and then starts moving items into place, the blue bar fills to all most the end and slows down to a stop and never completes the installation. I have left my laptop on over night and it never finishes the operation. I can only force quit the software update. Which has knock out my printer drivers. Now, I just keep unchecking the box in the software updates for new HP printer software. Is anyone else having this problem or is it just my system? Sincerely: Professor G

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

HT204406 My iTunes Match will not complete Step 3 of the uploading process. Many songs are "waiting"

My iTunes Match will not complete Step 3 of the uploading process. I have over 700 "items" designated as "waiting." I have restarted multiple times but it stalls at this point.

I've been reading all these comments about how match is not working and people are having problems uploading all their songs. My problem is more basic than that. When I open iTunes I immediately get the spinning color disc of death and I can't do anything at all. I can't go to the store. I can't listen to a song. I can't do anything. I just tried to sync my iPod. I pugged it into my computer, iTunes started up, looked like it was going to sync, then the spinning disc again. So forget match; I can't do anything, nada, nothing. I even tried to send my iTunes application to trash, but I got a message saying I couldn't do that because it was needed for OS X. Talk about a do loop, this is unbelievable.
Is anyone else having the problem I am having?

Adobe Acrobat package built with CCP will not completely install

Adobe Acrobat package built with CCP will not completely install. It starts out fine as if it is installing then suddenly disappears with no errors.   I am installing it under the local administrator account and simply double clicking on the setup.exe created in the build folder. Am I missing something??

Hi rivera2u & TRU Software,
I believe you are just double clicking on the Exception Deployer and not running the same from the command prompt . Mentioned below is the syntax that we need to use while using Exception Deployer on your machine(s).
ExceptionDeployer
    --workflow=install
    --mode=pre|post
    --INSTALLDIR=<path_of_installation directory>
    --installLanguage=<locale_code for Acrobat>
    --abortOnFail
    --help
The same is mentioned in the link shared by Abhijit earlier.
Please do let us know if this works for you or not.
Cheers,
Kartikay Sharma

ITunes will not complete installing!

I have had probelms installing iTunes for apx 2 years. (when version 6 was released).
So I thought I would try to install version 7.
I installed QuickTime v7.1 with not problems, however when I try to execute the "iTunesSetup.exe" it seem to reach the end of the install process and then I get a message stating that "The older version of iTunes cannot be unistalled".
I have gone thru all of the posts on this discussion and tried every trick mentioned when the 1603 error has occurred with other people. Yet it still will not complete the installation process.
I found the "iTunesSetupxxx.log" and displayed it to see what is occurring and it still has the 1603 error as being the last error. I have included the last part of that log below:
fdintCOPY_FILE
file name in cabinet = QuickTime.msi
uncompressed file size = 24522752
fdintCLOSEFILEINFO
file name in cabinet = QuickTime.msi
fdintCOPY_FILE
file name in cabinet = AppleSoftwareUpdate.msi
uncompressed file size = 2078720
fdintCLOSEFILEINFO
file name in cabinet = AppleSoftwareUpdate.msi
fdintCOPY_FILE
file name in cabinet = iTunesSetupAdmin.exe
uncompressed file size = 108096
fdintCLOSEFILEINFO
file name in cabinet = iTunesSetupAdmin.exe
Executing: "C:\WINDOWS\system32\msiexec.exe" /i "C:\DOCUME~1\JOE~1.CHA\LOCALS~1\Temp\IXP508.TMP\iTunes.msi"
Returned: 1603
I have looked for the folder mentioned in the executing line and cannot locate it.
Anyone have any ideas that are outside of the normal posts listed in this forum?
I have deleted everything that is remotely related to iTunes, iPod, QuickTime, and even Apple from the registry after backing the registry up of course.
Yet I have not found a way to get around that 1603 error.
Help!

I have investigated a little further on my initial point where I could no longer run iTunes. The last functioning version that I had installed was version 4.8. When I tried to upgrade to version 5, it gave me an error that some of the install files were corrupted and then it froze up. The only way it could be ended was by using task manager. From that point on I have had nothing but trouble. I tried to reinstall version 4.8 but I got an error on that as well. So ever since this occurred I have been trying the newest version just to see if it would accomplish the task of creating a functioning version of iTunes. Each time it will reach a certain point and give an error message about the older version could not be removed.
So that is my history on this issue.
Anyone out there have any ideas as to what I can do to at least get a version that will work installed?
Even it is the same steps that have been given before, at least I will know someone is actually listening to me and not igoring me like the apple support does.
TIA!

Latest Itunes update will not completely load

The latest I-tunes software will not completely download. Flag say to contact System administrator Ituners.

Hi FoxyByrne,
If you are having issues installing iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Regards,
- Brenden

Using ITunes Tutorials will not play. Using windows XP. All software up to date. I know others have had the same issue, however I have not seen a solution. I appreciate any advice.

iTunes Tutorials iwll not play. Using windows XP. All software up to date. I know others have had the same issue, however I have not seen a solution. I appreciate any advice.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

IOS 8.1.1 will not complete install on iPad 2....

Doing via USB connection to iMac it goes through all the verification and installation processes but will not complete and keeps returning to message stating update 8.1.1 is available and do I want to intsall it. It has repeated itself 4 times now.
iMac is on 10.10.1 and iTunes latest version.
Any help appreciated.

Thanks for the help, Demo
I did all that you said except rebooting the Mac (I wanted to first discover where the issue was happening) and that solved it.
On USB reconnecting the iPad to the Mac, iTunes launched and reported that it was running iOS 8.1.1. Therefore all that was needed was to reboot the iPad after the installation process. However, Apple's installation process did not instruct that and so I feel it is at fault - It should message the updated status of the iOS rather than leave the user in a loop as it did with me.

Any Software will Not Complete Install

Ha, I been trying to solve an issue with my G4 (two door mirror model). Any software from iLfe 6, Final Cut Express, MS Word or Final Cut Pro will not complete the installment. I keep getting errors that the installation could not complete please try again. I trouble shoot the CD drive making sure there is not an issue with it, and the hardrive too. I did a clean reinstall of Tiger No problem - SO I know the hardrive is fine. I played CDs music so no problem from CD drive. I use the same Software CDs to install on my Powerbook G4 and no problem, so I know there is nothing wrong with the CDs. Does anyone know or may think what can be cause my Desktop G4 from failing to install any programs other then the OS.
AT this point, I have a G4 sitting with just the OS and no application - and it driving me crazy I can't do anything with it.
Thanks for any help.

Dale, It is the retail version purchased day after it came out. Just a thought, when a PC has problems we can reset the bios back to factory state - can this been done to an apple system such as my G4? The reason why i'm installing back my software is because I had to reinstall the OS do to too many shareware apps I downloaded and could not trash for the life of me - many of the shareware apps was too buggy and could not get rid of them. So, I do not understand my I'm having this issue - OS can install but no other software will.

I have a corrupted itunes and will not un-install

I have a corrupted itunes and will not un-install

Follow the instructions in this article https://support.apple.com/en-gb/HT204313
Make sure you perform the actions in the right sequence and reboot your PC before attempting the reinstall.

Lion 10.7.5 Recovery install loops and will not complete install.

Hi on my Mid 2009 Macbook Pro with 8GB Ram it seems that a virus got into the system and was causing Safari to crash then affected iTunes, MS Word 2008, and others to malfunction.
Steps taken:
1. Started in recovery mode on Recovery Partiion selected and recovered from TimeMachine backup
2. On start up checked Software update and said All Up to Date.
3. Safari still quiting unexpectedly.
4. Started in recovery mode on Recovery Partiion selected and Installed new OS X Lion from recovery. This would not complete after 2 attempts was starting to loop. It will show the blue bar that it has 2 hrs 22 min, 1 hr 11 min, 34 min 32 ...etc then after 2 min it will then say -1,384,587,231 hours to complete, then go back to about 34 min. the blue bar is filled 100% at this point. Then it will do it all over and over again.
I restarted and things appeared to be working okay. I left the computer on with one web page and a Word file open while I did work on another computer. It started a new Time Machine backup and seemed to be doing fine. Then I heard it restart itself! I checked to see what would happen. It showed the grey progress bar below the apple logo like it is starting in Safe Mode, then the progress bar disappeared before completing and it just shows the spining icon for over an hour? It appeared to be screwed. I shut the computer off and same result to restart.
5. Started in recovery mode on Recovery Disk usb drive selected and erased Hard Drive to Mac OS (Extened Journaled).
Tested OK after erase.
6. Ran Recover Lion again, and again and again same result.
7. Left running overnight, and still running the loop and not completing.
8. Reset SMC
9. Reset PRAM
10. Erased hard drive again formated Mac OS (Extened Journaled)
11. Started in recovery mode on Recovery Disk usb drive Installed new OS X Lion from recovery - Same result loops and Never completes
12. downloaded RecoveryDiskAssistant.dmg and created a new Lion Recovery usb
13. Erased hard drive again formated Mac OS (Extened Journaled)
14. Started in recovery mode on Recovery Disk new usb drive Installed new OS X Lion from recovery - Same result loops and Never completes
That is where I am at at this point. The drive is new (within 2 months or so since installed) and it reformats okay and seems to test okay in Disk Utiliy
I had also used the Terminal to run diskutil eraseDisk HFS+ MacHD "/Volumes/disk0"
This did erase the disk and had tried Lion recovery install again and still fails. I would even try Mountain Lion, but have not upgraded to it yet. I think I need the computer working to purchase and install it.
I checked the TimeMachine back up disk on my iMac and disk utility says it needs repairs, when repairing it just goes and goes with no result and does not seem to be able to repair.
So at this point I would like to just get the laptop to install an operating system and work. Then I will see if there is a way to recover files on the time machine back up disk.
Any help would be very much appreciated.
Thanks,
Ben

I have even reinstalled Safari to no avail.
The only way to reinstall Safari on a Mac running Lion or Mountain Lion is to reinstall OS X using OS X Lion: About Lion Recovery
You mentioned that you have v10.7.5 installed but I see v10.8.1 in your profile ??
Exactly which OS X is installed ???
Troubleshooting suggestions may be based on that information.

ITunes 11 will not load properly when Windows 7 starts

Hi Everyone,
I'm running Windows 7 64bit, iTunes 11. I successfully ran iTunes 10 on this PC previously.
iTunes is configured to launch when Windows boots. What happens is that it does start, and then the 'Checking iTunes Library' message appears for a few seconds. iTunes appears on the Task Bar during this period. The 'Checking.." message disappears, and then so does the icon in the Task Bar.
When I check Task Manager iTunes appears on the Processes tab in the Image Name list as: iTunes.exe *32, so it is loading, but there is no GUI interface available.
If I kill the task manually, and then start iTunes from the shortcut everything works fine.
Here is what I have tried to do to resolve this:
1) run msconfig and disabled Apple Push
2) removed and reinstalled Apple Quicktime (after downloading latest version)
3) unchecking all other start processes in msconfig to see if iTunes would load (it did not)
I have not found other suggestions so I figured I should post this and see if anyone else has some advice on how to get iTunes to load properly when I boot my computer.
Here are some details on the computer:
MB - Asus PZ77-VPro
CPU - i7-3770K @ 3.5GHz
RAM - 32 GB
VC - nVidia GForce GTX-670
C: HD - 120 GB solid state drive (this is where itunes is intalled)
E: HD - 2GB Raid 0 (this is where the itunes database has been installed)
I would appreciate your help after a morning of unsuccessful troubleshooting.
Thanks,
James

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Itunes 64 bit will not complete install for windows 7?

Similar Messages

Maybe you are looking for