Itunes 7.1.1 and Vista home

Itunes runs fine. and the ipod runs fine aslong as they are not connected to the computer togeather, when i plug my ipod up to my computer my CPU Process Max out at 100%, when i un-plug my ipod and turn off the service then it goes back to normal, when running itunes.
My Cpu is AMD 3200
i have a 1024mb of memory
USB 2.0
So speed is not a problem.
I plug up my ipod to my mac mini, and it runs fine, but my main libery is on my windows Vista PC for storage reasons.
any help or getting this message to Apple for the next itunes and ipod update would be great
Thanks
Chris
[email protected]

I deinstalled all codecs (including Nero), because windows vista solutions also pointed me in that direction, but no luck yet..
okay. we'd better try swapping out your QuickTime now that the codecs are out of the way.
sometimes with that sort of "error message free" launch failure with QuickTime, Add/Remove doesn't want to get rid of the QuickTime. so we'll try the following technique if that happens:
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Similar Messages

  • I have the ipod touch 5 ios 7. i reset my passcode but i dont remeber what it is. i dont have itunes on my computer and my home button doesn't work. how do i reset my passcode or ipod?

    i habe the ipod touch 5 ios 7. i reset my passcode but i dont remeber what it is. i dont have itunes on my computer and my home button doesnt work. how do i reset my passcode or ipod?

    If you can't remember your passcode, you'll have to restore it to remove the passcode, as explained here: http://support.apple.com/kb/HT1212.
    If you're running iOS 7 with Fid My iPod enabled, in order to restore it you'll have to force it into recovery mode as explained here: http://support.apple.com/kb/ht1808, or erased it using Find My iPhone on icloud.com if your home button isn't working (see http://help.apple.com/icloud/#/mmfc0ef36f).

  • Cannot install itunes 7.1 in Windows Vista Home Premium

    I am getting this error when I try to install iTunes:
    "iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBScript is installed, turn off script blocking in anti-virus and personal firewall software, reregister VBScript, and the install iTunes."
    Does anyone know how to fix this problem? Please advise.
    Thanks
      Other OS   Windows Vista Home
      Other OS   Windows Vista Home

    Could you please post the link, where you found your answer,... I am having the same problem, and unable to install the itunes, to a new pc, which has vista,...ty.

  • Itunes won't start on vista home premium

    I installed Vista Home Premium and did a fresh install of iTunes (7.1.1.5).
    iTunes won't start and gives an error (iTunes won't start):
    Eventname: APPCRASH
    Name: iTunes.exe
    Version: 7.1.1.5
    Timestamp:45f8a616
    Name of the errormodule: StackHash_03ef
    I can't seem to find the solution in the Forums and internet.
    I deinstalled and reinstalled iTunes several times but it still gives the same error.
    Quicktime also won't start.
    Any help is appreciated.

    I deinstalled all codecs (including Nero), because windows vista solutions also pointed me in that direction, but no luck yet..
    okay. we'd better try swapping out your QuickTime now that the codecs are out of the way.
    sometimes with that sort of "error message free" launch failure with QuickTime, Add/Remove doesn't want to get rid of the QuickTime. so we'll try the following technique if that happens:
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • BIOS Compatibility between WinXP Pro and Vista Home Premium

    I want to install WinXP Pro on my pc.  I have a Desktop 3000 J115, Model 7387-A11 and it came with Vista Home Premium.  I want to make sure that the BIOS can support either OS.  If it cannot, I would like to know how to get the correct BIOS.  I realize that there may be a few BIOS settings that are different between the OS's.
    Thanks

    This is not a right forum to post this problem. You should post it in Database General Forum.
    I've Windows Vista Home Edition 32 bit.
    In my laptop it is running but screen resolution changes to basic colour. Due to this, some graphical distortion occurs in few places. Also, refresh in the query grid needs to be perform when you are scrolling SQL Developer data from top to bottom or vice versa.
    Regards.
    Satyaki De.

  • Developer 6i and Vista Home Premium

    Noone Know if it s possible to install developer 6i on Vista Home Premium??

    Forms 6i installed and running on Windows Vista

  • Boot camp and Vista home basic

    everything seems to be working well with BC and Vista. Vista has this tool that automatically checks for problems, and then tries to find solutions, this is all done in the background. When I check to see if I had any problems, well I do. It states that there are missing Apple drivers and these drivers can be found on the apple website or by using Apple software update. Well Software update says all is up to date, and that goes for Apple and Vista. Is there anyone else experiencing this with Vista Home Basic?
    Thanks.

    you may need to re insert leopard and re download the drivers. There is also an option to "fix" the drivers when doing this. That's what I had to do.

  • CS  and Vista Home Basic

    Hi couple of questions if anyone can help
    1. Does CS 2(Indesign/Pshop/Illustrator) run on Windows Vista® Home Basic SP1 ?
    2. We are soon to upgrade to CS 4 - has anyone encountered problems with the above operating system and CS4?
    Thanks!

    If you want to read about the differences in Vista, here is a link.
    http://www.microsoft.com/windows/windows-vista/compare-editions/default.aspx
    I wish they never had the 'basic' or other versions. It's so confusing - especially to older relatives of mine.

  • Mac Book Boot camp and Vista Home Premium  - will it run ok?

    I have the latest black Mac Book with 2GB of ram installed. Will this allow Boot Camp to run Vista Home Premium ok? Or should I go for Parallels instead?

    I run the exact same system. The Vista performance test scores are as follows:
    Processor 5.1
    Memory 4.6
    Graphics 3.3
    Gaming Graphics 3.1
    Primary Hard Disk 4.8
    Obviously this is not a system for really high end gaming, but the average user will be very pleased with the performance. Do not forget that you can use a flash memory USB device with ReadyBoost to get a little bump in these numbers.
    I could not be happier with how Vista Home Premium runs on my Macbook. It takes 3X the time to start up as Mac OS X.

  • Share iTunes library between Leopard and Vista, over LAN

    Hi,
    I would like to share my iTunes library on my Mac, so that our other Vista computer can access it.
    I have ticked 'Look for shared libraries' on both the Mac and PC. We use a LAN setup with a firewalled router. I am able to access the Mac's public folder from the Vista PC and vice versa.
    Except, the Mac library is not present in iTunes on PC. I used the latest iTunes on both computers.
    Is there something that I am missing, maybe a port that I have to forward or anything else? Also, do I have to enable another kind of sharing on the Mac, except Sharing in iTunes?
    Can someone please give me some advice?
    Regards

    Just for your info, Vista ***** whatever you try to do. I'm stuck with Vista on a pre-installed laptop. All experience I have from Vista is bad, don't buy Vista or a computer with preinstalled Vista if you can avoid it.
    We have three computers in a home network, one Macbook Pro, one PC with Windows XP, and the Vista laptop. All are using iTunes-8, downloaded and installed last week.
    Sharing iTunes libraries using the option to share libraries on a local network works fine between Mac and Windows-XP. The sharing also works fine between the XP and the Vista PC.
    But the Vista PC can't access the Mac iTunes library. When trying to open the Mac library, iTunes on the Vista computer says something like "Fetching library info from...". It's the same problem when trying to access the Vista library from the Mac.
    We had a similar problem when trying to access shared folders on the local network. Thanks to a tip on this forum how to tweak the Vista registry, the shared folder problem was solved.
    I'm think some registry setting in Vista might solve iTunes shared library problems. Maybe some Windows freak knows how to patch the registry to solve this issue.
    Otherwise the solution is to trash Vista, and install Windows-XP.

  • Error 1310 while installing itunes, config.msi folder missing, Vista home edition.

    I get the following error when installing itunes 10.5.3 on my Windows Vista 32Bit premium home edition:
    Error 1310. Error writing to file: C:\Config.Msi\4361d.rbf. Verify that you have access to that directory.
    I cannot find the folder mentioned above.

    I have the same problem. I've tried tons of ways to solve that. Finally I suceed today.
    I closed all the antivirus and computer/device backup programs and elevate the pession of Config.Msi folder to the current user (by right clicking the folder, add the name of current account under security tab).
    Then I reinstalled the updates, it worked fine.
    I think one of those methods may be enough to solve the problem, but I'm not sure which is.

  • ITunes 7.1.1 and Vista

    So is iTunes finally compatible with Vista? Or are there still issues?

    Yes, many people are annoyed by the Vista incompatibilities.
    You can download and attempt to use the XP version. For some people it works fine, for others (including me) most things work okay but some things don't, and for still others it doesn't work at all.
    Most of the problems seem to center around playing videos (especially if they are stored on SATA drives or RAID arrays) and around file permissions.
    The only way to know whether it will work for you is to try. If you decide to go ahead rather than waiting for Apple to officially support Vista, make sure you have good backups and a restore point set prior to installing iTunes so you can recover if something bad happens.
    Gigabyte GA-M55plus-S3G, AMD Athlon 64 x2 4200+, nVidia 7600 GS   Other OS   Vista Ultimate 64-bit

  • Moving iTunes from Windows 2000 to Vista Home Premium

    I am buying a new computer and am currently using Windows 2000. I have an older version of iTunes on it because I haven't been able to download the new version since Windows 2000 is no longer supported.
    I have my entire iTunes folder backed up on another computer via a home network. I am wondering how to get all this onto my new computer. Should I:
    Install the new version of iTunes on my new computer and authorize this computer?
    Copy the iTunes folder from my back-up computer to the C: drive of my new computer?
    If I do this, will it automatically restore all my playlists on the new computer?
    Also, I have a lot of mp3 files that I have imported into my library which are currently residing on my C: drive and not in the iTunes folder. I believe iTunes is "pointing" to those files. If I move these mp3 files to the same location (same folder name) on the C: drive of my new computer will these be restored as well, or will I have to import them all into iTunes again? We're talking about 400 songs here and I would rather not do that if I don't have to.
    Thanks for any help you can give me!

    By clicking "yes" to that message, anything on your iPod _*that isn't in your iTunes library*_ will be deleted from the iPod.
    If you need to transfer music from your iPod to your new iTunes installation, then check out Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    *_Do this before you do anything else,*_ or you may lose what's on the iPod.

  • S10 and Vista Home Premium

    I recently purchased an S10 with XP home. i installed vista over it, and i have lost the ability to scroll up and down on my touchpad. i was missing the wireless, but that is fixed. im sure i am missing more things. please advise. thanks.

    Hi , for touchpad i prefer this driver includes all special functions
    that the origin synaptics driver not includs
    http://www.laptopvideo2go.com/forum/index.php?show​topic=15103
    New driver is there on the site above 12.2.11.0
    for WinXP/Vista/Windows 7 (as Vista compatible)
    in conjunction with this...i prefer this little tool ....
    what synaptics driver doesnt have , it has..
    no more use the 2 two mousebuttons
    convinient 2-Finger scrolling and 3 Finger usage  &
    install not necessary & free configurable
     ... works in all windows xp,vista,w7
    But  before running deaktivate the funktion --> pinch in the synaptics touchpad prefs..
    http://code.google.com/p/two-finger-scroll/downloa​ds/list
    For Vista & W7 its i think the latest EnergyManagement &
    includes of course onscreen volume & screen brightness....i recommend this driver ...
    http://consumersupport.lenovo.com/en/DriversDownlo​ads/drivers_show_305.html
    download and dezip it and on setup with rightclick install as with adminstrative rights as admin.....
    ive use it under vista/w7beta ....and Fn-F5 Menue for Switch WLAN/BT works...if you have bt of course...
    regards KalvinKlein
    Message Edited by KalvinKlein on 04-22-2009 10:10 PM
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Flash and Vista Home Premium Not working!

    so i recently upgrade to windows vista. and after installing
    flash(succesfully, no errors) I click on the icon and i get the
    busy mouse icon.. then nothing.
    I then check the TaskManager and there it is.. Flash.exe
    running.. but the actual IDE (Interface) of Flash never shows up.
    can someone please help me asap as I need to get this working
    and dont really want to downgrade cause i purchased Vista..

    Yeah - using Flash 24/7 and the fact that it always has run
    10x better on PC is the main reason why
    I buy PCs. Thanks for telling me about Vista.
    dzedward wrote:
    > Security wise--- Yes.. however, it does prompt you
    before things install, and
    > opening system folder and such, just to make sure that
    is what you are trying
    > to do... some feel like it's annoying, but after so many
    people asked for a
    > safer OS, that is what they came up with, and that is
    what you get.. I don't
    > find it annoying.. The interface is very visually
    appealing as well.. After
    > being with Vista for a couple days, if you look back at
    XP, you will think,
    > "wow, that is very bare, and ugly".. I do agree about
    the Mac and security,
    > that is wonderful, but so far, I haven't been on a Mac
    that performs at the
    > same level as a PC when running any Adobe products.. but
    I might get the iMac
    > when panther is released! However, I will still have the
    PC, as always.. Here
    > at work I'm on an iMac, and I hate the fact that I can't
    use the scroll wheel
    > to scroll my layers on the timeline... I never knew how
    important that was to
    > me, until I didn't have it! You can buy/build a PC for
    half the money of a
    > Mac, and outperform it by double.. that's my 2 cents.
    >

Maybe you are looking for

  • Need help connecting to Oracle 8i db

    I'm trying to build a very simple jsp page that connects to a Oracle 8i schema I already have. Here's the entry in the data-sources.xml for the project: <native-data-source name="jdev-connection-native-VacationTest" jndi-name="jdbc/VacationTestCoreDS

  • How to convert a string list to number list

    Hi I have a table1 that codeid is a number(2) and other table2 that obtain the codeidlist in a varchar2(50) where I save the codeid that I selected from table 1, I can be one o more : 1,2,4,5 etc. I wanna make this but It gives an error: Invalid Numb

  • Is there ASIO Support in FMLE?

    I'm wondering if there is ASIO support for FMLE?

  • Firefox (27 beta) freezes unless I move the mouse

    I've had this problem before, some time in November, with Firefox 25. As suggested here https://bugzilla.mozilla.org/show_bug.cgi?id=933733 I switched to 26 beta mid November and that solved the problem for me. Today, Firefox updated again, to 27. (I

  • Deploying printers takes 2 logins to show up

    We're trying to deploy printers through group policy. It works but if you reboot a PC Then the user logs in they aren't there, but if you log out and back in they are. It always seems to take 2 logins to get the printers. Can this be fixed? Jason